• Economic and Environmental Geology
• /
• v.45 no.1
• /
• pp.59-68
• /
• 2012

With the decline in discoveries of new oil fields and increasing demand from developing countries it is believed that enhanced oil recovery (EOR) technologies will play a key role to meet the energy demand in years to come. Based on the recently-published data, this paper discusses current status of global EOR market and technical development trends. The EOR market includes oil produced through various EOR recovery methods, such as thermal recovery, gas injection, chemical injection. Also, EOR methods are addressed screening criteria by reservoir and fluid characteristics including lithology, depth, thickness, and oil properties such as composition and gravity. Finally, the examples of field applied by various EOR methods are discussed with respect to reservoir characteristics and performance.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.247-254
• /
• 2014

The compressibility of fracture in naturally fractured reservoir is larger than the compressibility of matrix in rock, although the compressibility of a typical rock is very small. The effective compressibility including the fracture compressibility should be considered to predict oil recovery correctly. It is hard to quantify changes of fracture aperture and pore volume in reservoir without the effective compressibility. In this study, oil recovery is analyzed by commercial simulator concerning the fracture compressibility based on fracture properties. We found that the effective compressibility affects oil recovery with change of polymer flooding factors such as polymer molar weight, concentration and injection rate. The estimated cumulative oil production is smaller with the effective compressibility than without it. Also, bottomhole pressure decreases rapidly without considering effective fracture compressibility.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.55-62
• /
• 2018

This study aims to investigate the characteristics on bottom ash flotation using vegetable oils as a collector. The experiment of changing the kerosene dosage as a collector for the flotation of coal ashes, the recovery of unburned carbon and unburned carbon content were 80% and 63%, respectively, when the dosage of kerosene was 9 kg/ton. The experiment of using soybean oil as a collector to improve flotation efficiency, the recovery of unburned carbon and unburned carbon content increased to 95% and 68%, respectively, when the dosage of soybean oil was 9 kg/ton. The recovery of unburned carbon and unburned carbon content were 99% and 78%, respectively, when safflower oil containing more poly unsaturated fats with double bonds than soybean oil was 9 kg/ton. The calorific value of the unburned carbon was 5,803 cal/g, confirming that it was possible to be used as a fuel for thermal power plants. Lastly, using vegetable oil as a collector it showed higher recovery of unburned carbon and higher unburned carbon than kerosene, which was mineral oil. Moreover, oil containing a large amount of poly unsaturated fat with two or more double bonds was found to have higher unburned carbon than other vegetable oils; thus showing excellent adsorbability for unburned carbon.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.4
• /
• pp.3-18
• /
• 2002

The present study was carried out to discuss the suitability of the criterion for the determination of the on-water oil removal resource requirement in Korea by comparison with the US criterion. According to the present criterion in Korea, the on-water response operation against the worst case discharge assuming the oil spillage of 60,000 ton from the accident of DWT 300,000 tanker requires the oil recovery capacity of 19,425 kl/hr (on-water recovery volume 20,000 ton). Under the US criterion, the recovery capacity of 16,667 kl/hr is required to respond to oil spill accident of the worst case discharge from the DWT 300,000 tanker. The result shows that resource requirement from the Korean criterion is 16% higher than US criterion, indicating that thc Korean criterion is reasonable.

• The Journal of Internal Korean Medicine
• /
• v.1 no.1
• /
• pp.98-106
• /
• 1976

In order to study the effect of croton oil on the mucous cell in the mice intestin the experimental animals were injected with 0.1gm body weight of croton oil through intraperitoneally. They were sacrificed by ether anesthesia and obtained from distal small intestine and duodenum and colon, and fixed in 10% meutral formal. After embedded in paraffin, sectioned in 5 micro thickness, and stained with P.A.S (Periodic Acid Schiffis) reaction. The average number of the mucous cell was counted in each specimen over 20 fields under 450 magnification. The following results were obtained; 1) An average number of mucous cell began rapidly increase from 15 min and reached high average number after injection of croton oil of mucous cell from 30-60 min after injection. 2) An average number of mucous cell rapidly increase after injection of croton oil and were not reduced normal level by time lapsed 48 hrs. 3) The mucous cell showed with tape of time after injection of croton oil. A type and B type decrease and showed recovery C type decrease and recovery. 4) According to the above findings, it is presumed that croton oil accelerate secretion of mucin of the mucouse cell and production of mucin in growing mucous cell.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.3
• /
• pp.390-396
• /
• 2013

Biosurfactants have versatile properties and potential industrial applications. A new producer, B. subtilis TU2, was isolated from the underground oil-extraction wastewater of Shengli Oilfield, China. Preliminary flask culture showed that the titer of biosurfactant obtained from the broth of TU2 was ~1.5 g/l at 48 h (718 mg/l after purification), with a reduced surface tension of 32.5 mN/m. The critical micelle concentration was measured as 50 mg/l and the surface tension maintained stability in solution with 50 g/l NaCl and 16 g/l $CaCl_2$ after 5 days of incubation at $70^{\circ}C$. FT-IR spectra exhibited the structure information of both glycolipid and lipopeptide. MALDI-TOF-MS analyses confirmed that the biosurfactant produced by B. subtilis TU2 was a blend of glycolipid and lipopeptide, including rhamnolipid, surfactin, and fengycin. The blended biosurfactant showed 86% of oil-washing efficiency and fine emulsification activity on crude oil, suggesting its potential application in enhanced oil recovery.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.79-82
• /
• 2006

Fueled by ballooning oil prices, waste plastics are now regarded as being cheap and abundant renewable sources, removing their stigma of dirty wastes Catalytic pryolysis of plastics in liquid phase allows recovery of light fuel oil as well as green treatment of polymerics wastes, and therefore significant efforts have been devoted to this research field. In this study, catalytic Pyrolysis of LDPE was carl ied out in semi-batch reactor which equipped a unit of separation and recirculation. The effect of react ion conditions were examined by analyzing liquid oil yield and carbon number distribution of products

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.117-120
• /
• 2008

As we can see at the oil spill occident on the coast of Taean, the viscosity of the spilled oil becomes thicker as time goes by. It becomes waste oil with the form of tar. It moves to other areas following a tide. When the temperature of the water goes up, the viscosity becomes lighter and forms oil film. It repeats the process spreading to and polluting extensive areas where the tide reaches. People have used hand nets to collect waste oil of tar at the sea. But it is very difficult for them to collect the tar type waste oil spread on large areas before it reaches to the beach. This paper tried to find a way to collect the tar type waste oil efficiently. It used absorption mat of boom type that uses the attachment characteristics of the tar type waste oil and floating waste recovery device of net type. It tested the possibility of using the devices at the oil spill accident on the beach of Taean. The result showed that net type recovery device was much more efficient in collecting the waste oil in short time than the hand net system of people. It confirmed that the net type recovery device could be used to collect tar type waste oil.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.447-452
• /
• 2016

It is imperative to develop an effective pathway to depolymerize lignin into liquid fuel that can be used as a bioheavy oil. Lignin can be converted into liquid products either by a solvent-free thermal cracking in the absence air, or thermo-chemical degradation in the presence of suitable solvents and chemicals. Here we show that the solvent-assisted liquefaction has produced promising results in the presence of metal-based catalysts. The supercritical ethanol is an efficient liquefaction solvent, which not only provides better solubility to lignin, but also scavenges the intermediate species. The concentrated sulfuric acid hydrolysis lignin (CSAHL) was completely liquefied in the presence of solid catalysts (Ni, Pd and Ru) with no char formation. The effective deoxy-liquefaction nature associated with scEtOH with aid hydrodeoxygenation catalysts, resulted in significant reduction in oxygen-to-carbon (O/C) molar ratio up to 61%. The decrease in oxygen content and increase in carbon and hydrogen contents increased the calorific value bio-oil, with higher heating value (HHV) of $34.6MJ{\cdot}Kg^{-1}$. The overall process is energetically efficient with 129.8% energy recovery (ER) and 70.8% energy efficiency (EE). The GC-TOF/MS analysis of bio-oil shows that the bio-oil mainly consists of monomeric species such as phenols, esters, furans, alcohols, and traces of aliphatic hydrocarbons. The bio-oil produced has better flow properties, low molecular weight, and high aromaticity.

• Development and Reproduction
• /
• v.23 no.2
• /
• pp.183-191
• /
• 2019

The objective of this study is to evaluate the anesthetic effects of clove oil and tricaine methanesulfonate (MS-222) on the Far Eastern catfish, Silurus asotus, by measuring the times to anesthesia and recovery. Each anesthetic effect of clove oil and MS-222 was tested in two groups of fish with different body sizes: a group of small fish (mean body length: $15.5{\pm}1.58cm$, mean body weight: $50.1{\pm}5.91g$, n=20) and a group of large fish (mean body length: $31.5{\pm}4.19cm$, mean body weight: $302.1{\pm}15.22g$, n=20). The anesthetics were used at concentrations of 200, 300, 400, 500, and 600 ppm. The results showed significant relationships between the concentration of the anesthetic and the body size of the fish. Each of these variables showed statistical significance (p<0.05). The time to anesthesia decreased linearly with increasing concentration in the large fish for both clove oil and MS-222 (p<0.05). Based on an optimal anesthetic time of approximately 1 min, the preferred concentrations of the anesthetics were 500 ppm for clove oil and 600 ppm for MS-222. Both the anesthetic time and the recovery time were shorter for the small fish than for the large fish (p<0.05). Our study showed that the smaller-sized Far Eastern catfish was more easily anesthetized and recovered more rapidly from anesthesia than the larger-sized fish.