• Composites Research
• /
• 제36권2호
• /
• pp.69-79
• /
• 2023

유수분리는 석유 생산, 폐수 처리 및 식품 가공을 포함한 다양한 산업 응용 분야와 해양 기름 유출과 같은 환경 분야에서 중요한 과정이다. 물-기름 혼합물의 분리 효율은 혼합물의 유형, 기름과 물의 상태, 적용하고자 하는 기술을 포함한 여러 요인에 의해 영향을 받을 수 있으며, 수년에 걸쳐 물리적, 화학적 및 생물학적 방법으로 물과 기름을 분리하기 위한 다양한 기술이 개발되어 오고 있다. 본 논문은 중력에 의한 분리, 원심 분리, 흡착재, 필터 등을 이용한 유수분리를 포함하여 물-기름 분리에 사용할 수 있는 다양한 방법과 기술에 대해 개략적으로 설명하고자 한다. 각 방법의 장점과 한계를 최근 연구 동향 및 향후 전망과 함께 논의한다. 또한 본 논문에서는 지속 가능하고 환경 친화적인 접근 방식에 특히 중점을 두고 유수분리 분야의 향후 연구와 산업 적용을 위한 방향성을 제시하고자 한다. 결론적으로 본 논문에서는 유수분리 분야의 연구자 및 산업 종사자에게 유용할 수 있는 최근 유수 분리 기술에 대한 포괄적인 개요를 제공하고자 한다.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.1-6
• /
• 2007

A study on the new active circulation type oil-water separation system including buoyancy type guidance system was carried out in this paper. Newly developed oil-water separation system is composed of several oil separation steps. In the beginning of these steps, buoy type separation system would be used. Buoy type oil guiding system was developed based on the difference of density of water and oil.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.88-93
• /
• 2009

Lubricant oil is needed in air conditioning and refrigeration system because the compressor requires oil to prevent surface to surface contact between its moving parts, to remove heat, to provide sealing, to keep out contaminants, to prevent corrosion, and to dispose of debris created by wear. Thus, the oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics have been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$ at 50 bar and $70^{\circ}C$ to $90^{\circ}C$ at 80 bar. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.131-136
• /
• 2008

The oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics has been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $5^{\circ}C$ to $15^{\circ}C$ and $70^{\circ}C$ to $90^{\circ}C$. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.185-189
• /
• 2001

A study on the new active circulation type oil-water separation system including buoyancy type guidance system was carried out in this paper. Oil-water separation system is composed of several oil separation steps. Buoy type oil guiding system was developed based on the difference of buoyance of water and oil. The design speed of this vessel is 25 knots.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.39-44
• /
• 1998

An experimental study on oil absorbent was conducted to investigate the feasibility of utilizing absorbents in oil separation from water-oil mixture for spilt oil recovery. Experiments included investigations of absorptivity and filtering performance of a commercial oil absorbent for different diesel oil concentrations. The measured average absorptivity of the absorbent was above 92% for oil concentrations, 5, 10, 15vo1%, that shows good absorbing performance. Filtering the oil-water mixture, however, was too slow to be used for oil separation. An absorbent baffle system was suggested for oil separation which collects oil panicles by increasing contact between the absorbent and oil particles.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2001

A study on the new active type oil-water separation system including the oil-water separation system of magnetic film was carried out. Separation system is composed of several active types of circulating oil separation steps and one magnetic film separation step at final stage. At the magnetic separation step, ferrofluid easily forms a weak magnetic mixture with oil, which is from the water by magnetic field gradient. The vessel has been designed to run at the maximum speed of 25 knots. And two typical forms of SWATH and Catamaran have been studied as a new type of oil recovery vessel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3026-3031
• /
• 2008

In conventional closed-loop crankcase ventilation systems, the lubrication oil had to be re-circulated to the intake manifold, in the form of oil mist mixed with the blow-by gas. This blow-by gas containing the engine lubricant oil affects on the engine problems and the exhaust emissions. A high-efficient oil separator is required to minimize consumption of engine oil and reduce harmful emissions. In the conventional oil separator of CI engines, it has good oil separation performance even though separator design is simple, due to lots of the blow-by gas. As the emission regulation becomes severe, the oil separator for SI engines is also required. But in SI engines, separator design should be optimized, due to small size of oil particles and little amount of blow-by gas. In this study, oil separation performance classified by diameter of oil mist in cylinder head cover internal model which has three cyclones and two baffle plates for SI engine is calculated with CFD methodology.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.1028-1034
• /
• 2007

In order to establish a criteria of solid particle separation performance test on marine centrifugal purifier at factory acceptance test, an investigation had been done on criteria of test standards, regulations and test specifications of purifier manufactures. KS V 7836, fuel oil and lubricating oil purifiers for marine use-centrifugal type, the criteria of solid particle separation is studied in the point of reality, restricts and analysis method. It is proposed that a reasonable criteria and analysis method should be adopted, and the current criteria shall be revised to adequate levels considering reasonable basis and industrial technology levels. Also, the test analysis conceptions, separation efficiency method and particle size restriction method, are reviewed to fulfil separation performance test for marine centrifugal purifiers.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.299-303
• /
• 2005

본 연구는 MHD(Magnetohydrodynamics)방식의 전자기력을 이용하여 선박사고 등으로 인하여 해상에 유출된 기름을 분리하는 새로운 방법에 대한 설계 및 정식화를 이끌어 내었다. MHD분리방식은 최근에 연구되고 있는 자기파우더를 이용한 분리방식보다도 더욱 친환경적이고 분리가 용이하다는 강점을 가지고 있다. 여기서는 기름을 대신하여 고분자 입자를 넣은 해수를 가정하여 유체내의 전류, 자기장, 유속에 대한 분리율(분리측 입장의 질량/전 입자의 질량)을 수치시뮬레이션을 이용하여 그 특성을 검토하였다.