Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Standard Criteria of Solid Particle Separation Test for Marine Centrifugal Purifier

선박용 정유기 고형분 분리 성능시험 규격기준에 관한 연구

  • 정상후 (국방기술품질원 품질경영단 함정센터)
  • Published : 2007.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In order to establish a criteria of solid particle separation performance test on marine centrifugal purifier at factory acceptance test, an investigation had been done on criteria of test standards, regulations and test specifications of purifier manufactures. KS V 7836, fuel oil and lubricating oil purifiers for marine use-centrifugal type, the criteria of solid particle separation is studied in the point of reality, restricts and analysis method. It is proposed that a reasonable criteria and analysis method should be adopted, and the current criteria shall be revised to adequate levels considering reasonable basis and industrial technology levels. Also, the test analysis conceptions, separation efficiency method and particle size restriction method, are reviewed to fulfil separation performance test for marine centrifugal purifiers.

Keywords

References

  1. 한국표준협회, '선박용 연료유 및 윤활유 정유기-원심식(KS V 7836)', pp. 1 - 4, 2005
  2. 정상후, '선박용 원심정유기 성능시험 기준, 방 법 및 시료에 관한 조사보고서(DTaQ-07 -1352 -R)', 국방기술 품질원, pp. 1 - 41, 2007
  3. 정상후, '선박용 정유기 고형분 분리 성능시험 표준시료 지정에 관한 연구', 한국마린엔지니어링 학회, 제31권, 6호, pp. 804-809, 2007
  4. EUROPEAN COMMITTEE FOR STANDARDIZATION, 'ECN-Workshop Agreement (CWA -15375)', pp. 1-12, 2005
  5. ALFA-LAVAL, Http://www.alfalaval. com, 'Separation performance Standard', pp. 1-4, 'Separation performance' pp. 16-18, 2007
  6. 일본공업협회, '선박용 원심 유청정기 육상시험 방법(JIS F 6601)', pp. 1-4, 1996
  7. 한국표준협회, '선박용 원심식 기름 청정기 육상 시험 방법(KS V 6611)', pp. 1-4, 2004
  8. 해군 군수사, '연료유 정유기(국방4330-3005 (해))', pp. 1-6, 2001
  9. 해군 군수사, '윤활유 정유기(국방4330-3006 (해))', pp. 1-6, 2002
  10. U.S NAVY NAVSEA SYSTEM COMMAND, 'Purifier, Centrifugul, Fuel and Lube oil, Manual sludge discharge type(MIL-P-20632B (SH))', pp. 1-18, 1992
  11. U.S NAVY NAVSEA SYSTEM COMMAND, 'Purifier, Centrifugul, Fuel and Lube oil, Auto. sludge discharge type (MIL-P-24710A(SH))', pp. 1 - 24, 1993

Cited by

  1. Numerical Visualization of Fluid Flow and Filtration Efficiency in Centrifugal Oil Purifier vol.34, pp.1, 2010, https://doi.org/10.5916/jkosme.2010.34.1.084
  2. Influence on centrifugal force control in a self-driven oil purifier vol.38, pp.10, 2014, https://doi.org/10.5916/jkosme.2014.38.10.1251
  3. Separation characteristics of particles in a self-rotating type centrifugal oil purifier vol.38, pp.2, 2014, https://doi.org/10.5916/jkosme.2014.38.2.147
  4. 선박엔진용 Oil Separator의 Sludge 자동배출 시스템 구현 vol.35, pp.7, 2018, https://doi.org/10.7736/kspe.2018.35.7.663