• Journal of the Korean earth science society
• /
• v.38 no.7
• /
• pp.496-510
• /
• 2017

This study presents a new nationwide quantitative precipitation estimation (QPE) based on the hybrid surface rainfall (HSR) technique using the weather radar network of Korea Meteorological Administration (KMA). This new nationwide HSR is characterized by the synthesis of reflectivity at the hybrid surface that is not affected by ground clutter, beam blockage, non-meteorological echoes, and bright band. The nationwide HSR is classified into static (STATIC) and dynamic HSR (DYNAMIC) mosaic depending on employing a quality control process, which is based on the fuzzy logic approach for single-polarization radar and the spatial texture technique for dual-polarization radar. The STATIC and DYNAMIC were evaluated by comparing with official and operational radar rainfall mosaic (MOSAIC) of KMA for 10 rainfall events from May to October 2014. The correlation coefficients within the block region of STATIC, DYNAMIC and MOSAIC are 0.52, 0.78, and 0.69, respectively, and their mean relative errors are 34.08, 30.08, and 40.71%.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.100-105
• /
• 2017

The purpose of the present study was to develop and evaluate patient-customized helmets with a three-dimensional (3D) printer for radiation therapy of malignant scalp tumors. Computed tomography was performed in a case an Alderson RANDO phantom without bolus (Non_Bolus), in a case with a dental wax bolus on the scalp (Wax_Bolus), and in a case with a patient-customized helmet fabricated using a 3D printer (3D Printing_Bolus); treatment plans for each of the 3 cases were compared. When wax bolus was used to fabricate a bolus, a drier was used to apply heat to the bolus to make the helmet. $3-matic^{(R)}$ (Materialise) was used for modeling and polyamide 12 (PA-12) was used as a material, 3D Printing bolus was fabricated using a HP JET Fusion 3D 4200. The average Hounsfield Unit (HU) for the Wax_Bolus was -100, and that of the 3D Printing_Bolus was -10. The average radiation doses to the normal brain with the Non_Bolus, Wax_Bolus, and 3D Printing_Bolus methods were 36.3%, 40.2%, and 36.9%, and the minimum radiation dose were 0.9%, 1.6%, 1.4%, respectively. The organs at risk dose were not significantly difference. However, the 95% radiation doses into the planning target volume (PTV) were 61.85%, 94.53%, and 97.82%, and the minimum doses were 0%, 77.1%, and 82.8%, respectively. The technique used to fabricate patient-customized helmets with a 3D printer for radiation therapy of malignant scalp tumors is highly useful, and is expected to accurately deliver doses by reducing the air gap between the patient and bolus.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.27-34
• /
• 2010

In a test duct with closed configuration, particle removal performance of an edge-plate type electrostatic precipitator (ESP) was evaluated at a high flow rate in $CO_2$ rich environments by changing gap distances between collection plates, concentrations of $CO_2$, particle sizes, types of electrodes, and types of power supplies. At the same experimental conditions, collection efficiency of particles with the mean particle size, 300 nm, decreased as the gap distance and $CO_2$ concentration increased because of low electrostatic force and low discharged current. In addition, as the particle size increased, the efficiency increased because of high charging rate of the large particles. With the electrode type which has higher surface area of a discharging plate and with the power supply which applied 25 kHz-pulsed DC voltages, the removal efficiency was high even in rich $CO_2$ condition due to high electrostatic force at the same power consumption.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.767-788
• /
• 2014

The worldwide transition from analog to digital broadcasting has now been completed and the need to study next generation standards for Ultra High Definition TV (UHDTV) broadcasting, and broadcasting & communication convergence systems is rapidly growing. In particular, high resolution mobile broadcasting services are needed to satisfy recent consumers. Therefore, the development of highly efficient convergence broadcasting systems that provide fixed/mobile broadcasting through a single channel is needed. In this paper, a service scenario and requirements for providing 4K UHD & HD convergence broadcasting services through a terrestrial single channel are analyzed by employing the latest transmission and A/V codec technologies. Optimized transmission parameters for 6 MHz & 8 MHz terrestrial bandwidths are drawn, and receiving performances are measured under Additive White Gaussian Noise (AWGN) and time-varying multipath channels. From the results, in a 6 MHz bandwidth, the reliable receiving of HD layer data can be achieved when the receiver velocity is maximum 140 Km/h and is not achieved when the velocity is over 140 Km/h due to the limit of bandwidth. When the bandwidth is extended to 8 MHz, the reliable receiving of both 4K UHD and HD layer data is achieved under a very fast fading multipath channel.

• Korean Journal of Biological Psychiatry
• /
• v.12 no.2
• /
• pp.136-142
• /
• 2005

Object:The intracellular action of the antidepressant, venlafaxine, was studied in C6-gliomas using heat shock protein 70(HSP70) immunocytochemistry and HSP70 Western blots because HSP70 is associated with stress and depression. Methods:To examine how the glucocorticoid affects the expression of HSP70 in nerve cells, the rat C6 glioma cell was treated with dexamethasone for 6 hours. In addition, venlafaxine was administered to the experimental groups of C6 glioma cells for 1, 6, 24, and 72 hours each, after which the expression of HSP70 was investigated. Finally, venlafaxine and dexamethasone were simultaneously administered to the experimental groups for 1, 6, 24, and 72 hours, followed by an investigation of the expression of HSP70. Results:The short term(1 hour) venlafaxine treatment significantly increased the level of HSP70 expression. The short term treatment of venlafaxine with dexamethasone also increased the level of HSP70 expression but this reduction was not statistically significant. The long term(72 hours) venlafaxine with dexamethasone treatment significantly reduced the level of HSP70 expression. The long term treatment of venlafaxine also reduced the level of HSP70 expression but this reduction was not statistically significant. Dexamethasone(10uM, 6hours) did not affect the level of HSP70 expression compared with controls. Conclusion:Venlafaxine increases the expression of HSP70 at short term treatment, but prolonged treatment with dexamethasone suppresses the expression of HSP70.

• Radiation Oncology Journal
• /
• v.35 no.3
• /
• pp.217-226
• /
• 2017

Purpose: Hematotoxicity following anti-cancer treatment is known to be related to treatment efficacy in several malignancies. The purpose of this study was to examine the hematologic parameters related to the tumor response and survival in patients treated with curative surgery following preoperative chemoradiotherapy (CRT) for rectal cancer. Materials and Methods: Four hundred eighteen patients with rectal cancer who underwent preoperative CRT and curative surgery were analyzed, retrospectively. The main clinical factors and blood cell counts before and after CRT were investigated with respect to their relationships with tumor downstaging and patient survival. Results: The post-CRT leukocyte count was significantly different between the tumor downstaging group and the non-downstaging group (median, 4740/uL vs. 5130/uL; p = 0.013). Multivariate analysis showed that histological grade, circumferential extent, and post-CRT leukocyte count were related to tumor downstaging. In addition, histological grade, post-CRT leukocyte count, and tumor downstaging were related to disease-free survival. The 5-year disease-free survival and overall survival in patients with post-CRT leukocyte count ${\leq}3730/uL$, which is the cut-off value derived from the receiver operation characteristic (ROC) curve analysis, were significantly higher than those with higher counts (88.0% vs. 71.6%, p = 0.001; 94.4% vs. 84.1%, p = 0.024). Conclusion: Post-CRT leukocyte count of ${\leq}3730/uL$ could be regarded as a good prognostic factor for tumor response and survival in rectal cancer patients treated with preoperative CRT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1289-1300
• /
• 2011

In recent computer systems with high-performance, users execute programs needing large memory and programs intensively accessing files simultaneously. Such a large memory requirement makes virtual memory systems access swap spaces in disk, and intensive file accesses require file systems to access file system partitions in disk. Executing the two kinds of programs at once incurs large disk seeks between swap spaces and file system partitions frequently. To solve the problem, this paper proposes a new scheme called SAF to create several swap spaces in a file system partition, where pages to be paged out are stored. When a page is paged out, the scheme stores the page to one of the swap spaces close to a disk location where the most recently accessed file is located. The chosen swap space in the file system partition is closer to the disk location than the traditional swap space, so that our scheme can reduce the large disk seek time spent to move to the traditional swap space in paging out a page. The experiment of our scheme implemented in FreeBSD 6.2 shows that SAF reduces the execution time of several benchmarks over FreeBSD ranging from 14% to 42%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1805-1810
• /
• 2010

We present a simple, cost-effective, and fast fabrication process for three-dimensional (3D) microstructures; this process is based on multi-step electrochemical etching of metal foils which facilitates the mass production of 3D microstructures. Compared to electroplating, this process maintains uniform and well-controlled material properties of the microstructure. In the experimental study, we perform single-step electrochemical etching of aluminum foils for the fabrication of 2D cantilever arrays. In the single-step etching, the depth etch rate and bias etch rate are measured as $1.50{\pm}0.10 {\mu}m/min$ and $0.77{\pm}0.03 {\mu}m/min$, respectively. Using the results of single-step etching, we perform two-step electrochemical etching for 3D microstructures with probe tips on cantilevers. The errors in height and lateral fabrication in the case of the fabricated structures are $15.5{\pm}5.8% $ and $3.3{\pm}0.9%$, respectively; the surface roughness is $37.4{\pm}9.6nm$.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.353-362
• /
• 2015

Platform screen door (PSD) installed at underground subway station has reduced the safety accident, but it may cause poor air ventilation condition due to the isolated exhaust duct in the subway tunnel area. In this study, the additional ventilation system was suggested, which can be installed at a void space (i.e., storage room under stairs) of platform in order to improve efficiency of air ventilation rate. Exhausted air from platform was directed to underneath of platform and joined with existing ventilation duct of train exhaust system (TES). One subway station in Seoul city was selected to predict the effectiveness of the suggested lower exhaust system by using the computational fluid dynamics (CFD) analysis. The predicted mean age of air was decreased by 16.5% which proves the improvement of air ventilation efficiency when the suggested lower exhaust system was applied.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.217-220
• /
• 2012

The fruits of Acanthopanax sessiliflorus Seeman (Araliaceae) were extracted with 70% aqueous ethanol at room temperature. The concentrated extract was partitioned with ethyl acetate (EtOAc), n-butyl alcohol, and $H_2O$, successively. From the EtOAc fraction, two compounds were isolated through the repeated silica gel, octadecyl silica gel, and Sephadex LH-20 column chromatographies. According to the results of physicochemical and spectroscopic data including NMR, mass spectrometry, and infrared spectroscopy, the chemical structures of the compounds were determined as 3,5-dihydroxycinnamic acid (1) and protocatechuic acid (2). Compound 1 was isolated from the fruits of A. sessiliflirus Seeman for the first time. And the compounds were evaluated for the radical scavenging the antioxidant capacity using 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)diammonium salt, 1,1-diphenyl-2-picrylhydrazy, and oxygen radical absorbance capacity assay.