• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.560-562
• /
• 2013

OIl & Gas의 시추 및 생산 해역이 연안 천수역에서 점차 심해로 이동하는 추세로서, 오프쇼어 지원선(OSV, Offshore Support Vessel)도 원근해 이동과 작업구역의 거친 해상조건에 대응하기 위해, 선박크기의 대형화, 고성능화, 대용량화, 저환경부하화, 그리고 안정성 및 신뢰성을 강력하게 요구하는 선박으로 수요가 증가하고 있다. 대 수심용 OSV의 종류와 기능, 시장현황과 발주추이, 그리고 관련 기술개발의 동향 등에 대한 조사 분석을 해봄으로서 국내 중소 조선소 및 기자재업체의 시장기회에 대한 고찰을 해 보았다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.133-144
• /
• 2015

Recently, Korea shipping companies have been internally/externally difficult to manage their fleet due to the high price of bunker, wage and low cost of charterage and freight. To solve these problems, some shipping companies have tried to set up a new business regarding offshore plant supply vessel(OSV). Owing to the absence of big oil field near the Korea coast, OSV market has not been gradually progressing as far. This study intends to review the legal review of both international and municipal law for the OSV. Therefore I have provided basic legal information to the domestic shipping companies which have desired to enter the OSV's market and suggest legal revision harmoniously to identify the problem in the municipal law.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.601-609
• /
• 2022

Jack-up drilling rigs are mobile offshore platforms widely used in the offshore oil and gas exploration industry. These are independent, three-legged, self-elevating units with a cantilevered drilling facility for drilling and production. A typical jack-up rig includes a triangular hull, a tower derrick, a cantilever, a jackcase, living quarters and legs which comprise three-chord, open-truss, X-braced structure with a spudcan. Generally, jack-up rigs can only operate in water depths ranging from 130m to 170m. Recently, there has been an increasing demand for jack-up rigs for operating at deeper water levels and harsher environmental conditions such as waves, currents and wind loads. All static and dynamic loads are supported through legs in the jack-up mode. The most important issue by society is to secure the safety of the leg structure against collision that causes large instantaneous impact energy. In this study, nonlinear FE -analysis and verification of the requirement against collision for 35MJ recommended by DNV was performed using LS-Dyna software. The colliding ship used a 7,500ton of shore supply vessel, and five scenarios of collisions were selected. From the results, all conditions do not satisfy the class requirement of 35MJ. The loading conditions associated with chord collision are reasonable collision energy of 15M and brace collisions are 6MJ. Therefore, it can be confirmed that the identical collision criteria by DNV need to be modified based on collision scenarios and colliding members.

• Ocean Systems Engineering
• /
• v.5 no.3
• /
• pp.181-198
• /
• 2015

An OSV (Offshore Support Vessel) is being used to install a structure which is laid on its deck or an adjacent transport barge by lifting off the structure with its own crane, lifting in the air, crossing splash zone, deeply submerging, and lastly landing it. There are some major considerations during these operations. Especially, when lifting off the structure, if operating conditions such as ocean environmental loads and lifting off velocity are not suitable, the collision can be occurred due to the relative motion between the structure and the OSV or the transport barge. To solve this problem, this study performs the physics-based simulation of the lifting off step while the OSV installs the structure. The simulation includes the calculation of dynamic responses of the OSV and the structure, including the collision detection between the transport barge and the structure. To check the applicability of the physics-based simulation, it is applied to a problem of the lifting off step by varying the ocean environmental loads and the lifting off velocity. As a result, it is confirmed that the operability of the lifting off step are affected by the conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.428-436
• /
• 2015

This paper considered the concept and characteristic OSV operation business for support the offshore plant and suggested amendment Maritime Transportation Laws, legislative proposals to solve the legal absence and to develop offshore service industry. Because Maritime Transportation Laws specialized for the carriage of passenger and goods by sea is not perfectly covered with Offshore support business in Korea. So it is necessary to make an explicit amendments for the article of Maritime Transportation Laws that founds absence of the law with the definition of terms to correspond related existed regulation reflected on the characteristic offshore support business by using OSV to develop offshore plant industry including support, service, supply, transportation etc. I expect that this paper will be a basic study to make a government policy, law, regulation to activate Offshore Service Industry in the future.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.5
• /
• pp.361-370
• /
• 2020

We developed a heavy-duty work class ROV trencher named URI-T (Underwater robot it's trencher) that can conduct burial and maintenance tasks for underwater cables and small diameter pipelines. It requires various supporting systems, including a dynamic positioning (DP) vessel, launch and recovery system (LARS), A-frame, and winch in order to perform burial tasks because of its dimensions (6.5 m × 5.0 m × 4.5 m, 20 t) and the tough working environment. However, operating a DP vessel has disadvantages as it is expensive to rent and operate and it is difficult to adjust the working schedule for some domestic coast construction cases. In this paper, we propose a method using a barge instead of a DP vessel to avoid the above disadvantages. Although burying the cable and pipeline using a barge has lower working efficiency than a DP vessel, it can save construction expenses and does not require a large crew. The proposed method was applied over two months at the construction of the water supply in Yokji-do, and the results were verified.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.1
• /
• pp.12-18
• /
• 2017

Lots of fishery stocks are overexploited and the overcapacity exists in Korean fishing fleets. One of the reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the offshore large powered purse seine fishery from 1960s to 2010s. Gross tonnage and horse power per fishing vessel was increased annually. Fishing gear material was changed to the knotless webbing to settle faster. Fishing equipments was modernized and supply rate was also increased. Therefore the relative fishing power index in the offshore large powered purse seine fishery increased from 0.4 in 1970 to 1.0 in 1980, to 1.5 in 2000 and to 1.6 in 2010, but the rate of increase slowed down gradually. The results are expected to contribute to reasonable fishery stock management.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.7
• /
• pp.935-941
• /
• 2012

This paper describes a study of conventional electrical rig and simulated application of Flywheel Energy Storage system on the power system of the offshore plants with dynamic positioning system with the following aims: improve fuel consumption on engines, prevent blackout and mitigate voltage sags due to pulsed load and fault. Fuel consumption has been analyzed for the generators of the typical drilling rigs compared with the power plant with Flywheel Storage Unit which has an important aid in avoiding power interruption during DP (Dynamic Positioning) operation. The FES (Fly wheel Energy storage System) releases energy very quickly and efficiently to ensure continuity of the power supply to essential consumers such as auxiliary machinery and thrusters upon main power failure. It will run until the standby diesel generator can start and supply the electric power to the facilities to keep the vessel in correct position under DP operation. The proposed backup method to utilize the quick and large energy storage Flywheel system can be optimized in any power system design on offshore plant.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.94-96
• /
• 2013

Since LNG has explosive properties and difficulty to handle, it was avoided using LNG as fuel. However, recently LNG has been considered as alternative fuel of HFO. Several LNG fuel supply system has developed. Furthermore, STX ONS is developing LNG fuel bunkering system and bunkering shuttle. Bunkering shuttle carries out refueling LNG fuel while LNG fuel ship is on cargo work. In case of emergency, bunkering shuttle breakaway from the ship but a little amount of LNG falls down on deck. It can disperse to cargo work area also can explode. In this case LNG dispersed on deck was not considerable.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.1
• /
• pp.37-44
• /
• 2020

The change of fishing power index was analyzed to identify the development of the vessel and gear technology that may improve the fishing efficiency of the offshore conger eel pot fishery from 1980s to 2015. Gross tonnage per fishing vessel was rapidly increased annually. The standard of pot was maintained, but the number of pot used rapidly increased by using conger eel pot hauling devices, carrying and loading devices, main line hauler, casting devices and slide type pot. Fish finder system to identify fishing ground information and the conger eel pot hauling devices were modernized, and supply rate was also increased. Therefore, the relative fishing power index in the offshore conger eel pot fishery increased from 1.0 in 1980 to 1.3 in 1990, to 1.8 in 2000 and to 2.0 in 2015. The results are expected to contribute to reasonable fisheries stock management of the offshore conger eel pot fishery.