• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.381-381
• /
• 2010

$(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility inachieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFET channel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric films on p-Si (100) were grown by atomic layer deposition method, for which the conduction band offsets, valence band offsets and band gapswere obtained by using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy. The band gap, valence and conduction band offset values for $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric thin film, grown on Si substrate were about 5.34, 2.35 and 1.87 eV respectively. This band alignment was similar to that of $ZrO_2$. In addition, The dielectric function (k, $\omega$), index of refraction n and the extinction coefficient k for the $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films were obtained from a quantitative analysis of REELS data by comparison to detailed dielectric response model calculations using the QUEELS-$\varepsilon$(k, $\omega$)-REELS software package. These optical properties are similar with $ZrO_2$ dielectric thin films.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.248-250
• /
• 2011

A new grafted cactus cultivar, G. mihanovichii 'Ihong', for exporting abroad, was developed by crossing G. mihanovichii 'DR' line with dark red color, and G. mihanovichii 'Seolhong' cultivar with dark red in 2005. It grew for 6 months after grafting in vitro and culturing at 100 mL test tube. After grafting and planting in greenhouse in 2006, various characteristics were evaluated three times until 2009. It has flat round shape and dark red skin. In addition, it has 8 to 10 ribs and brown straight spines on the body. Its diameter was 44.0 mm after 10 months from planting, and bigger comparing with that of 'Seolhong' cultivar. The ability of propagation in 'Ihong' was better than that of 'Seolhong' and 'Ihong' approximately produced 15.8 offsets for 10 months.

• Structural Engineering and Mechanics
• /
• v.71 no.6
• /
• pp.603-625
• /
• 2019

Main cable configurations under final dead load and in the unloaded state and critical construction parameters (e.g. unstrained cable length, unstrained hanger lengths, and pre-offsets for tower saddles and splay saddles) are the core considerations in the design and construction control of a suspension bridge. For the purpose of accurate calculations, it is necessary to take into account the effects of cable strands over the anchor spans, arc-shaped saddle top, and tower top pre-uplift. In this paper, a method for calculating the cable configuration under final dead load over a main span, two side spans, and two anchor spans, coordinates of tangent points, and unstrained cable length are firstly developed using conditions for mechanical equilibrium and geometric relationships. Hanger tensile forces and unstrained hanger lengths are calculated by iteratively solving the equations governing hanger tensile forces and the cable configuration, which gives careful consideration to the effect of hanger weight. Next, equations for calculating the cable configuration in the unloaded state and pre-offsets of saddles are derived from the cable configuration under final dead load and the conditions for unstrained cable length to be conserved. The equations for the main span, two side spans and two anchor spans are then solved simultaneously. In the proposed methods, coupled nonlinear equations are solved by turning them into an unconstrained optimization problem, making the procedure simplified. The feasibility and validity of the proposed methods are demonstrated through a numerical example.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.1
• /
• pp.13-21
• /
• 2021

High-resolution satellites such as Kompsat-3 and CAS-500 include optical cameras of MS (Multispectral) and PAN (Panchromatic) CCD (Charge Coupled Device) sensors installed with certain offsets. The offsets between the CCD sensors produce geometric discrepancy between MS and PAN images because a ground target is imaged at slightly different times for MS and PAN sensors. For precise pan-sharpening process, we propose a co-registration process consisting the physical sensor modeling and image matching. The physical sensor model enables the initial co-registration and the image matching is carried out for further refinement. An experiment with Kompsat-3 images produced RMSE (Root Mean Square Error) 0.2pixels level of geometric discrepancy between MS and PAN images.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.509-517
• /
• 2022

The demand for underground infrastructures such as tunnels is expanding due to rapid urbanization. Tunnels in urban areas are usually constructed adjacent to structures supported by piles. Therefore, a proper understanding of pile-tunnel interaction due to tunnel excavation activities is vital. Thus, in this study, a numerical analysis is conducted to analyze pile settlements, ground surface settlements and shear deformations above an existing tunnel subject to the presence of an adjacent tunnelling, with vertical offsets, the number of piles and the pile spacing considered as variables in the analysis. The results show that the vertical offsets between the tunnel crown and the pile tip generatelarger settlement than the pile spacing. In addition, the vertical offset shows an inversely proportional relationship to the shear deformation due to new tunnelling.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.2
• /
• pp.58-61
• /
• 2002

Photoluminescence up-conversion in semiconductor heterostructures is a phenomenon in which luminescence occurs at energies higher than that of the excitation photons. It has been observed in many semiconductor heterostructure systems, including InP/AnALAs, CdTe/CdMgTe, GaAs/ordered-(Al)GalnP, GaAs/AIGaAs, and InAs/GaAs. In this wort, GaAs/AIGaAs heterostructures are used as a model system to study the mechanism of the up-conversion process. This system is ideal for testing different models because the band offsets are quite well documented. Different heterostructures are designed to study the effect of disorder on the up-converted luminescence efficiency. In order to study the roles of different types of carriers, the effect of doping was investigated. It was found that the up-converted luminescence is significantly enhanced by p-type doping of the higher-band-gap material.

• Journal of Computing Science and Engineering
• /
• v.2 no.1
• /
• pp.98-108
• /
• 2008

Terrain reconstruction from images is an ill-posed, yet commonly desired Structure from Motion task when compositing visual effects into live-action photography. These surfaces are required for choreography of a scene, casting physically accurate shadows of CG elements, and occlusions. We present a novel framework for generating the geometry of landscapes from extremely noisy point cloud datasets obtained via limited resolution techniques, particularly optical flow based vision algorithms applied to live-action video plates. Our contribution is a new statistical approach to remove erroneous tracks ('outliers') by employing a unique combination of well established techniques-including Gaussian Mixture Models (GMMs) for robust parameter estimation and Radial Basis Functions (REFs) for scattered data interpolation-to exploit the natural constraints of this problem. Our algorithm offsets the tremendously laborious task of modeling these landscapes by hand, automatically generating a visually consistent, camera position dependent, thin-shell surface mesh within seconds for a typical tracking shot.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.170-172
• /
• 2012

실시간 시스템(real-time system)은 논리적 연산을 일정한 시간적 제약 하에서 수행하는 시스템이다. 시간적 제약을 충족하도록 주기적 태스크(periodic task)를 스케줄(schedule)할 때 일반적으로 태스크 오프셋(initial offset)이 0 이거나 고정된 것으로 가정한다. 그러나 오프셋에 약간의 유연성을 허용함으로써 태스크들의 평균 응답 시간을 줄일 수도 있다. 이 논문에서는 주기적 태스크의 오프셋을 주어진 허용 범위 안에서 선택하여 평균 응답 시간(response time)을 최적화할 수 있음을 보이고, 임의의 태스크 집합에 대하여 최적 오프셋이 존재하는 좁은 범위를 제시한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.347-353
• /
• 2017

We present a STT-MRAM read-circuit which mitigates the performance degradation caused by offsets from device mismatches. In the circuit, a single current source supplies read-current to both the data and the reference cells sequentially eliminating potential mismatches. Furthermore, an offset-free pre-amplification using a capacitor storing the mismatch information is employed to lessen the effect of the comparator offset. The proposed circuit was implemented using a 130-nm CMOS technology and Monte Carlo simulations of the circuit demonstrate its effectiveness in suppressing the effect of device mismatch.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4E
• /
• pp.108-111
• /
• 2004

This paper has interest in the effect of a fine frequency offset, defined in ITU-T G.225, to the training performance of an adaptive equalizer. This paper uses Hilbert filter in configuring a transmission system model in order to let it get a frequency offset. Also additive white Gaussian noise and band-limited filter are considered. The signal received from the above transmission system applies to an adaptive equalizer with LMS algorithm, and its training procedures are investigated. As a result, we could find that even small fine frequency offset can severely deteriorate training performance of adaptive algorithm.