• 한국콘텐츠학회논문지
• /
• 제6권2호
• /
• pp.99-104
• /
• 2006

이 논문은 GPS 안테나로 사용될 수 있는 Offset Slotted 직사각형 마이크로스트립 패치 안테나를 디자인하기 위한 기법을 제안하였다. 안테나 특성을 해석하기 위해 Multi-port connection 기법과 Desegmentation 기법을 사용하였고, 고유전율의($\varepsilon_{\gamma}$=10.2) 기판과 직사각형 슬롯을 이용하여 안테나의 사이즈를 줄일 수 있었다. 제작된 안테나의 치수는 $20\times30\times1.27$[mm]로 작은 사이즈이므로 GPS 안테나 또는 핸드폰에 사용될 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.118-120
• /
• 2001

This paper presents a distance relaying algorithm based on the Discrete Fourier Transform(DFT) for elimination of DC-Offset. When the DFT is applied to current signal. the real and imaginary parts of fundamental component consist of fundamental component itself and DC-Offset. The DC-Offset is calculated by four consecutive values of the imaginary components, so that the fundamental component can be accurately estimated. Performance evaluation is presented for A-phase ground faults on 154kV 80km overhead transmission line. The proposed algorithm is inspected by software simulation and hardware simulation.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.23-33
• /
• 2012

With the development of many display technologies currently applied to them in the field of printed electronics, there have been many researches that high resolution printing for thin and uniform pattern. In this paper, printing ink flow properties in the reverse offset mechanism were simulated. The aim of this research is to expect the ink flow behavior between cliches to make fine pattern by a printing technique which is a reverse offset. The simulation results show that almost the same as the experiments and the flow behavior according to the ink film thickness and printing pressure changes could be expected.

• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.387-391
• /
• 2011

A uncooled infrared ray sensor used in an infrared thermal imaging detector has many advantages. But because the uncooled infrared ray sensor is made by MEMS (micro-electro-mechanical system) process variation of offset is large. In this paper, to solve process variation of offset a ROIC for uncooled infrared ray sensor that has process variation of offset compensation technique using differential delta sampling and reference signal compensation circuit was proposed. As a result of simulation that uses the proposed ROIC, it was possible to acquire compensated output characteristics without process variation of offsets.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.949-954
• /
• 2017

Multiple input, multiple output orthogonal frequency division multiplexing (MIMO OFDM) systems are the candidate for the future wireless communications. However, the main drawback of MIMO OFDM systems is their sensitivity to carrier frequency offset (CFO) similar to the single input, single output OFDM (SISO OFDM) systems. The demodulation of a signal with CFO causes large bit error rate and degrade the performance of a symbol synchronizer. It is important to estimate the frequency offset and minimize or eliminate its impact. In this paper, we propose a technique based on observation training symbols for estimating CFO by employing block-by-block estimation for SISO OFDM systems. The technique of SISO OFDM is extended to the MIMO OFDM systems. Simulation results show that the proposed techniques have a superior performance and better accuracy compared to the conventional techniques in the sense of mean square error.

• 한국컴퓨터정보학회논문지
• /
• 제23권1호
• /
• pp.67-74
• /
• 2018

In this paper, we propose an efficient scene based non-uniformity correction algorithm which performs the offset correction using the uniform obtained from input scenes for Infrared camera. In general, pixel outputs of a infrared detector can not be uniform. Therefore, the non-uniformity correction procedure need to be performed to make the image outputs uniform. A typical non-uniformity correction method uses a black body at the laboratory to obtain the output of the infrared detector's pixels for two temperatures, HOT and COLD, and calculates the non-uniformity correction parameters. However, output characteristics of the Infrared detector changes while the Infrared camera is operated, the fixed pattern noise of the Infrared detector and dead pixels are generated. To remove the noise, the offset correction is generally performed. The offset correction procedure usually need the additional device such as a thermo-electric cooler, shutter, or non-uniformity correction lens. Therefore, we introduce a general scene based non-uniformity correction technique without additional equipment, and then we propose an improved non-uniformity correction algorithm based on image to solve the problem of the existing technique.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1247-1257
• /
• 2000

옵셋 안테나 (offset-fed dish antenna)를 분석한다. DBS 수신안테나로서 널리 사용되는 옵셋 안테나는 비대칭, 개방형 구조 때문에 해석이 어렵다. 본 논문에서는 푸리에 변환 방법과 Physical Optics를 이용하여 옵셋 반사판과 피드 혼 개구면으로부터의 방사 전계에 대한 정확한 성공적으로 유도하였다. 또한 반사판의 지경, 촛점거리, 단면 등 모든 다양한 구조적 환경에서 해석할 수 있도록 여러 구조 인자를 가진 해를 도출하였다. 이를 이용하여 한 개의 반사판에 어려 개의 혼을 배치시킨 다중 빔 안테나를 분석하고, 특히 동경 116$^{\circ}$의 무궁화위성 (중계기출력 59dBW)과 동경 139$^{\circ}$로 계획되어 있는 Orion 위성 (중계기출력 54dBW)로부터 동시에 수신할 수 있는 안테나를 고찰한다.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.504-517
• /
• 2015

This paper presents a novel switching voltage model and an offset-based pulse width modulation (PWM) scheme for multilevel inverters with unbalanced DC sources. The switching voltage model under a DC voltage imbalance will be formulated in general form for multilevel neutral-point-clamped topologies. Analysis of the reference switching voltages from active and non-active switching voltage components in abc coordinates can enable voltage implementation for an unbalanced DC-source condition. Offset voltage is introduced as an indispensable variable in the switching voltage model for multilevel voltage-source inverters. The PWM performance is controlled through the design of two offset components in a subsequence. One main offset may refer to the common mode voltage, and the other offset restricts its effect on the quality of PWM control in related DC levels. The PWM quality can be improved as the switching loss is reduced in a discontinuous PWM mode by setting the local offset, which is related to the load currents. The validity of the proposed algorithm is verified by experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.84-85
• /
• 2008

In this paper, differential cross coupled LC VCOs with two noise frequency filtering techniques are proposed. Both VCOs are based on symmetric capacitor with asymmetric inductor tank structure. The VCO using low pass filtering technique shows low phase noise of -130.40 dBc/Hz at 1 MHz offset when the center frequency is 1.619 GHz. And the other VCO using band pass filtering technique shows -127.93 dBc/Hz at 1 MHz offset frequency when center frequency is 1.604 GHz. Two noise frequency filtering techniques are approached with different target.

• 한국정보통신학회논문지
• /
• 제22권4호
• /
• pp.683-690
• /
• 2018

본 논문에서는 배열 안테나 기반의 MVDR (minimum variance distortionless response) 항 재밍 GPS (global positioning system) 수신기에서 안테나 경로 사이에 존재하는 이득, 위상, 지연 편차를 교정하기 위한 안테나 교정 기법을 제안한다. 제안하는 기법은 다중 안테나 시스템에서 안테나 경로들 사이의 이득, 위상, 지연 편차를 추정하고 이를 보상한다. 경로 간 이득, 위상, 지연 편차를 정확히 추정하기 위해 좋은 상관 특성을 갖는 파일럿 신호가 사용된다. 교차 상관에 기반하여 지연 편차가 먼저 추정되며 이후에 이득과 위상 편차가 추정된다. 정밀한 지연 편차 추정 및 보상을 위해 보간기법을 사용하는데 이산 푸리에 변환 (DFT) 기반의 보간기법으로 계산 복잡도를 감소시킨다. 제안된 기법은 MATLAB을 이용한 컴퓨터 모의실험을 통해 검증한다. 모의실험 결과에 따르면 제안하는 기법을 적용하면 이득, 위상 시간 지연 편차를 각각 0.01 dB, 0.05 도, 0.5 ns 이내로 줄일 수 있다.