• Journal of Communications and Networks
• /
• 제11권4호
• /
• pp.406-415
• /
• 2009

In this work, we consider performance modeling of a wireless sensor network with a time division multiple access (TDMA) media access protocol with slot reuse. It is assumed that all the nodes are peers of each other and they have two modes of operation, active and sleep modes. We model the sensor network as a Jackson network with unreliable nodes with on and off states. Active and sleep modes of sensor nodes are modeled with on and off states of unreliable nodes. We determine the joint distribution of the sensor node queue lengths in the network. From this result, we derive the probability distribution of the number of active nodes and blocking probability of node activation. Then, we present the mean packet delay, average sleep period of a node and the network throughput. We present numerical results as well as simulation results to verify the analysis. Finally, we discuss how the derived results may be used in the design of sensor networks.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.793-798
• /
• 2005

The performance functions of a suspension must provide often place conflicting demands upon rail bogie design since design parameters which may be altered to improve performance in one area may simultaneously reduce performance in another area. To determine compromised design parameters, it is need to carry out a number of simulations and trade-off studies. The suspension design system based on computer simulations is presented. The system is composed of analysis solvers and GUI which have functions such as modeling, analysis and sensitivity analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.181-186
• /
• 2010

A numerical study was conducted to predict the performance curve of a canned motor pump for SMART(System Integrated Modular Advanced ReacTor). The study used a computational domain which included not only the pump but also a suction pipe and a volute casing with a discharging pipe in order to simulate an experimental setup. The ANSYS CFX program was utilized to obtain flow characteristics inside the pump as well as the overall pressure rise across the pump operating on- and off-design points. Computed results showed that the performance of the pump at off-design points was much lower than expected. Special attention was made to find the cause of the low performance of the pump operating at low flow rate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.295-298
• /
• 2008

We developed a novel PVA pixel design for mobile application with excellent off-axis image quality and optical performance by introducing Active Level Shift technology and optimizing pixel structure. Our new pixel design enables better off-axis image quality without sacrificing other optical properties compared with a conventional mPVA structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.590-593
• /
• 2005

Unmanned Helicopter has several abilities such as vertical Take off, hovering, low speed flight at low altitude. Such vehicles are becoming popular in actual applications such as search and rescue, aerial reconnaissance and surveillance. These vehicles also used under risky environments without threatening the life of a pilot. Since a small unmanned helicopter is very sensitive to environmental conditions, it is generally known that the flight control is very difficult problems. The nonlinear adaptive fuzzy controller design procedure and its applications for altitude control of unmanned helicopter were described in the paper. This research was concentrated on describing the design methodologies of altitude controller design for small unmanned helicopter acquiring autonomous take off and vertical movement. The design methodologies and performance of the altitude controller were simulated and verified with an adaptive fuzzy controller. Throughout simulation results, I showed that the proposed adaptive controllers have enhanced control performance such as robustness, effectiveness and safety, in the altitude control of the unmanned helicopter.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.240-249
• /
• 2004

In the present paper efforts have been made to optimize InAlAs/InGaAs HEMT by enhancing the effective gate voltage ($(V_c-V_off)$) using pulsed doped structure from uniformly doped to delta doped for microwave frequency applications and reliability. The detailed design criteria to select the proper design parameters have also been discussed in detail to exclude parallel conduction without affecting the del ice performance. Then the optimized value of $V_c-V_off$and breakdown voltages corresponding to maximum value of transconductance has been obtained. These values are then used to predict the transconductance and cut-off frequency of the del ice for different channel depths and gate lengths.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.417-420
• /
• 1998

In this paper the formation mechanism of tail current is analyzed and its effect on GTO turn-off performance is given. The conclusion is that the large tail current will considerably increase the turn-off loss $E_{off}$ and cause the re-triggering during GTO's off-switching, therefore the best design criterion is that the tail current of power GTO must be as low as possible.w as possible.

• 동력기계공학회지
• /
• 제16권5호
• /
• pp.55-62
• /
• 2012

Centrifugal compressors are widely used and each operating condition is different. However, it cannot be manufactured according to the every operating condition. In the this study, performance of compressor was evaluated with various rotational speeds of impeller and various stagger angles of diffuser in order to apply a typical model widely. A centrifugal compressor was designed and manufactured based on the design point. On this machines, an experiment was conducted and the performance was predicted at off-design point. The performance prediction was validated with the experimental result and the numerical result. Although the isentropic efficiency on the prediction was slightly lower than that on the experimental result due to the heat loss in the experiment, the pressure ratio was predicted well and also the predicted results were matched well with the numerical results. When the rotational speed of the impeller and the stagger angle of the diffuser were changed together, the compressor can be worked in the high efficiency region and avoided operating in the stall region.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.244-250
• /
• 1994

This paper presents the design of a new turn-off gate drive circuit for GTO which can accomplish faster turn-off switching. The major disadvantage of the conventional turn-off gate drive technique is that it has a difficulty in realizing high negative diS1GQT/dt because of VS1RGM(maximum reverse gate voltage) and stray inductances of turn-off gate drive circuit[1~2]. The new trun-off gate drive technique can overcome this problem by adding another turn-off gate drive circuit to the conventional turn-off gate drive circuit. Simulation and experimental results of the new turn-off gate drive circuit in conjunction with chopper circuit verify a faster turn-off switching performance.

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.269-274
• /
• 2010

가스화기를 장착한 고체산화물연료전지와 가스터빈의 하이브리드 시스템의 사전 연구로서 합성가스에서 수소와 일산화탄소의 구성이 하이브리드 시스템의 성능특성에 미치는 영향을 조사하였다. 이때 다른 구성요소와 다른 발열량을 가진 연료의 특성이 가스터빈의 탈설계점 운전을 유발하여 결과적으로 전체 하이브리드 시스템의 다른 성능 특성을 야기할 것으로 예상된다. 합성가스의 구성요소가 고체산화물연료전지의 성능에 영향을 준다는 것과 일산화탄소를 사용하는 하이브리드 시스템의 성능이 수소를 사용하는 것보다 나쁘다는 것이 발견되었다. 부분부하 성능에서는 수소를 사용하는 경우 부분부하 운전시에 성능 저하가 일산화탄소의 경우보다 더 현저하였다.