• The Korean Journal of Archival Studies
• /
• no.28
• /
• pp.123-153
• /
• 2011

In Asia, when cotton and cotton fabrics cultivated and produced in India of Southern Asia had spread to the whole Asia area by land and by sea, the Cotton Road and cotton fabric cultural area could be formed. In Korea, the traditional cotton (Gossypium arboreum) brought by Moon Ik-Jeom in 1363 was cultivated and then the Upland cotton (Gossypium hirsutum) brought via Japan could be produced from 1904. Especially, Gwangju/Jeonnam was the most active place in producing traditional cotton, and eventually became the center of cotton cultivation and fabric production after bringing in Upland cotton. In order to collect and record the cotton cultural resources in the broad area, the Cultural Resources Set, classified its component parts should be made first and then the collecting objects should be investigated. The collecting areas are selected based on the spreading paths and the regional significance of cotton. Since its difficulty of collecting the relevant resources from all of the places in Asia, it should be planned to share the resources through exchanges and cooperation among private, institution and organization. The relevant experts from the various fields should participate in the interdisciplinary researches which are necessary for collecting and recording of wide area cultural resources. Considering the collecting limitation of genuine relics, the digital archives should be established and then offered through a web site that everyone can use them freely by remote. It also needs to plan to display on and off-line for users to perceive the similarity, difference and interconnections of the resources with ease.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.31-40
• /
• 2016

In vehicular ad-hoc networks (VANETs), vehicles sense information on emergency incidents (e.g., accidents, unexpected road conditions, etc.) and propagate this information to following vehicles and a server to share the information. However, this process of emergency message propagation is based on multiple broadcast messages and can lead to broadcast storms. To address this issue, in this work, we use a novel approach to detect the vehicles that are farthest away but within communication range of the transmitting vehicle. Specifically, we discuss a signal-to-noise ratio (SNR)-based linear back-off (SLB) scheme where vehicles implicitly detect their relative locations to the transmitter with respect to the SNR of the received packets. Once the relative locations are detected, nodes that are farther away will set a relatively shorter back-off to prioritize its forwarding process so that other vehicles can suppress their transmissions based on packet overhearing. We evaluate SLB using a realistic simulation environment which consists of a NS-3 VANET simulation environment, a software-based WiFi-IP gateway, and an ITS server operating on a separate machine. Comparisons with other broadcasting-based schemes indicate that SLB successfully propagates emergency messages with latencies and hop counts that is close to the experimental optimal while reducing the number of transmissions by as much as 1/20.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.211-218
• /
• 2010

Volume of concrete slab changes by temperature and moisture effects. At that time, tensile stress develops because the slab volume change is restrained by friction resistance between the slab and subbase, and then crack occurs occasionally. Accordingly, researchers have made efforts to figure out the friction characteristics between the slab and subbase by performing push-off tests. Lately, researches to analyze concrete pavement behavior by the friction characteristics have been performed by finite element method. In this study, The friction characteristics between the slab and subbase were investigated based on the friction test results for lean concrete, aggregate, and asphalt subase widely used in Korean concrete pavements. The energy method bilinearizing relation between nonlinear friction resistance and displacement were suggested. The friction test was modeled by 3-D finite element program, ABAQUS, and the model was verified by comparing the analyzed results to the test results. The bilinear model developed by the energy method was validated by comparing analysis results obtained by using the nonlinear and bilinear friction resistance displacement relation as input data. A typical Korean concrete pavement was modeled by ABAQUS and EverFE and analyzed results were compared to evaluate applicability of the bilinear model.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.85-94
• /
• 2013

PURPOSES: The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding strength tests were performed according to the application rate and curing time of asphalt emulsion. Based on finding from this study, optimum application rates and curing times are proposed. METHODS: In order to investigate bonding characteristic of asphalt emulsion, tests were performed on both asphalt concrete pavement and portland concrete pavement. Also, asphalt emulsions were tested at the application rate of 0, 0.2, 0.4, 0.6, and $0.8{\ell}/m^2$ and at the curing time of 0, 0.5, 1, 2, and 24 hours. Pull-off test and shear bonding strength test, which commonly used for bonding strength measurement of asphalt emulsion, were adopted for this study. To assess field performance under different testing condition, asphalt emulsions were applied to in-service pavement. Throughout coefficient of determination analysis between material index properties from asphalt emulsion and mechanical response from bonding strength tests, performance correlativity was analyzed. RESULTS: Test results show that optimum application rate for asphalt overlay on asphalt concrete pavement (AOA) and asphalt overlay on concrete pavement (AOC) was $0.4{\sim}0.5{\ell}/m^2$ and $0.3{\sim}0.5{\ell}/m^2$, respectively. According to the curing time increment, tensile strength and shear strength of AOC were increased to 22~44% and 20~39%, respectively. AOA case also show strength increment in tensile strength (42%) and shear strength (9%). We tested the applicability of tack coat materials at the field sites, and our findings demonstrated that the bonding (for D and E) and rapid curing (for B, C, and D, E) performances were superior than others. Among material index properties, there was a high correlation between penetration ratio and bonding strength test result. CONCLUSIONS : Result show that interlayer bonding strength was affected by asphalt emulsion type, application rate and curing time. AOC required slightly higher application ($0.1{\ell}/m^2$) than AOA. Both AOA and AOC cases show higher strength at longer curing time. Up to 2hours of curing, rapid strength increments were observed, but strength increment ratio was decreased after 2hours of curing. From the observed correlation between penetration ratio and bonding strength, it is expected that penetration ratio can be used as one of important factors affecting bonding strength analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.599-607
• /
• 2017

Since 2015, small and medium domestic enterprises that treat more than a certain quantity of chemical substances in accordance with the Chemical Substance Control Act are obliged to submit an off-site impact assessment and risk management plan. In order to reduce the administrative and economic burden of the risk assessment, its impact was determined. Toxic leaks of nitric acid, methanol, and acetic acid were estimated and the correlations (between them?) were calculated. In addition, the correlations of this study were used to compare the KORA results according to the accident scenarios of the actual workplace and the extent of the damage as a function of distance in the case of toxic leaks. In this study, the correlation formula of the materials can be used to quickly determine the damage distance in the event of the accidental leakage of materials in the road or workplace, and to prepare emergency plans and respond to emergencies more quickly.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.179-184
• /
• 2019

In many countries, such as developing countries where electricity is scarce, small wind turbines in the form of Off Grid are an effective solution to solve power supply problems. In some countries, the expansion of power systems and the decline of electricity-intensive areas have led to the use of small wind power in urban road lighting, mobile communications base stations, aquaculture and seawater desalination. With this change, the size of the small wind power industry is expected to have greater potential than large-scale wind power. In the case of small wind power generators, the generator is controlled at a variable speed, and the voltage and current generated by the generator have many harmonic components. To solve this problem, the AC to DC converter to be studied in this paper is a three-phase step-up type converter with a single switch. The inductor current is controlled in discontinuous mode, and has a characteristic of having a unit power factor by eliminating the harmonic of the input current. The proposed converter is composed of LCL filter and three phase rectification boost converter at the input stage and a single phase full bridge for grid connection. It is a control system with energy storage system(ESS) that the system stabilization can be pursued against the electric power.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.145-154
• /
• 2008

The purpose of this study is to evaluate the quality of on-line departure time-based link travel time estimates. For this, accuracy (i.e. estimation error) and timeliness (i.e. degree of time lag) are proposed as MOE of the quality of on-line link travel time estimates. Then the relationship between quality of link travel time estimates and link length and level of congestion is analyzed. It was found that there is trade-off between the accuracy and timeliness of link travel time estimates. The estimation error was modeled to consist of two components: one is systematic error and the other is mean square error which reflects level of congestion. further, time lag was again segmented into three parts for the analysis purpose. There are minimum one, congestion-related one, and update interval-related one. From the real-world data using AVI system, it was revealed that regardless of the link length and level of congestion, 10 minutes of time lag occurs in general.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.367-376
• /
• 2012

Crack sealing is a maintenance technique commonly used to prevent water and debris penetration and reduce future degradation in pavement. The conventional crack sealing operations are, however, dangerous, costly, and labor-intensive. Automating crack sealing will improve productivity and quality, and offer safety benefits by getting worker off the road. During the last two decades, several teleoperated and machine-vision assisted systems have been developed to automate the overall process of routing and sealing pavement cracks. However, the developed systems have not been commonly used in the construction sites because of the technical problems. Especially, the performance of end-effector, related to the productivity and quality improvement, is very important factor to improve the practical use of the developed systems. The main objective of this research is to develop an end-effector in automated pavement crack sealing machine and to analyze the technical feasibility of the developed end-effector.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.31-38
• /
• 2011

As the percentage of permeable ground is reduced due to the increased impermeable roads of major cities, a heat island phenomenon can be dominantly observed, resulting in increased temperature. In addition, rainfall that would have been naturally absorbed and retained by the permeable ground is overflowed due to large volumes of run-off water, resulting in more sewer failures and increased erosion. In terms of permeable pavement system, block paving has been used anywhere as well as provides many years of service. The permeable block paving is an effective alternative to the more traditional asphalt or plain concrete for minor roads; furthermore, it looks a lot better than other pavements. In this study, the functional drainage evaluation of block paving was carried out, considering the usage of experimental sludge and wheel tracking test, in order to simulate the field condition of roads.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.1
• /
• pp.29-36
• /
• 2015

Current domestic research is to demonstrate the effectiveness and efficiencies of flood prevention measures through one-dimensional numerical analysis and this study's object is to help water managers to make the efficient decisions by applying the two-dimensional urban run off model XP-SWMM model in the flooded area and comparing with the flood prevention measures. Statistics were analyzed, based on the data collected from Cheongju Weather Service from 1967 to 2011 for 45 years. 50 years Flood frequency simulations of water flow capacity analysis of the target area for flooded areas $539,548m^2$, inundation depth 1.0 m, was analyzed by inundation time of 48 minutes. When comparing with the constructions of bypass road and underground storage facilities to increase the water flow capacity of A1 small drainage areas as flood protection, if you install a batching target underground detention basin with a capacity of $13,500m^3$, it is expected that the flood by rainfall with frequency of 50 years will be resolved completely. In preparation for extreme weather in the future flood mitigation measures, underground storage tank installation is considered a better efficient way.