• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.977-983
• /
• 2013

Based on the consideration of the hourly patterns of the electricity power consumption, this study predicted the effectiveness of hybrid power generation system, which is composed with wind power generator and photovoltaic generator. And this case study is performed at Konrido, which is a affiliated island of Kyeongsangnam-do. As the results, it is obvious that it is not efficient to cover the whole electricity power consumption only with any single power generating system, because the hourly patterns of electricity power consumption, wind power generation and photovoltaic generation are quite different. And because the wind is being through almost 24 hours, it is also found out that wind power generating system with storage battery is the most efficient combination for this case study.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.3
• /
• pp.347-353
• /
• 1995

[ $F_o-value$ ] of canned smoked-oyster in cottonseed oil (SOCO) were measured using a microcomputer aided $F_o-value$ measuring system, and the microbiological safety of the canned SOCO was evaluated to optimize the energy consumption. Most of the microorganisms in raw oyster were saprophytes. No microorganisms were detected from the canned SOCO which was pretreated by conventional procedure and sterilized at $110^{\circ}C$ with $F_o-value$ of 5.92min and over. The most heat resistant microflora isolated from the raw oyster was Bacillus sp.. D-value at $121.1^{\circ}C$ and z-value of spores of Bacillus sp. in the SOCO homogenate were 4.10min and $10,91^{\circ}C$, respectively. After 120 days storage at $50^{\circ}C$, no growth of microorganisms was recognized from the canned SOCO with $F_o-value$of 5.92min.

• Journal of Environmental Science International
• /
• v.29 no.9
• /
• pp.885-905
• /
• 2020

This study described the characteristics of the upstream migration of salmon (Chum salmon, Oncorhynchus keta) along Yeon-gok Stream in the eastern coastal region of Korea from October 24 to November 9, 2018 using radio tag and data storage tag loggers for the detection of the locations of tagged salmon and measurement of water temperature. Tracking experiments were conducted and classified into four types (case 1 to case 4) depending on the release time and the number of salmon tracked. Experiments from case 1 to case 3 were classified depending on the number of salmon tracked into cases in which a single tagged salmon was tracked (case 1), a pair of tagged salmon was tracked (case 2), and salmon were tracked by different sex ratios (case 3). Experiments from cases 1 to 3 were conducted between 10 AM and 1 PM, and case 4 was conducted after 3:30 PM. Salmon moved and spawned in the downstream region of the Yeon-gok, where water temperature is higher than in other rivers and salmon return in Canada, Russia, Japan, and the U.S.A. Most of the radio-tagged salmon swam in deep and shaded areas during the day but actively moved upstream close to sunset, regardless of the release time. Females showed relatively more active movements than males during upstream migration.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.7
• /
• pp.69-79
• /
• 2011

Laboratory tests are generally used to determine the input parameters for the selected constitutive models controlling various stress and drainage conditions, but have disadvantages in that the tests are performed on the samples obtained from the bore hole which are prone to be disturbed by various factors such as the tube penetrations, sample preparations and storage. To overcome these disadvantages, it is necessary to understand the effect of disturbance on the stiffness of the sample, especially the normally consolidated clays which are generally considered as soft clays. Therefore, in this study triaxial tests are performed on the normally consolidated kaolinite to evaluate the sample disturbance effects on the stiffness and to determine the field representative input parameters. The stress path results show that the shear and coupling modulus degradation patterns with strain are affected seriously by the disturbance. However, the strengths of the normally consolidated kaolinite are little influenced by the disturbance.

• Maritime Security
• /
• v.2 no.1
• /
• pp.125-149
• /
• 2021

Even 10 years after the Fukushima nuclear disaster, Japan has yet to solve the problems emerging from generating contaminated water every day. Japan has unilaterally decided to release nuclear wastewater in the sea despite Korea's concerns about safety as their radioactive water storage tanks reach the limits. Despite Korea's response, Japan is still preparing to discharge nuclear wastewater without fulfilling its obligations under the United Nations Convention on the Law of the Sea. There are concerns about marine pollution caused by the radioactive materials from nuclear wastewater and invading Korea's maritime sovereignty. In particular, it is impossible to reverse the effects of environmental pollution, so plans to discharge radioactive water must be prevented unless immediate safety is guaranteed. This study proposes Korea's response strategy to resolve the conflict between the two countries due to plans to release contaminated water. Korea should respond to Japan's release of nuclear wastewater in the sea in various ways through cooperation with Japan, provisional measures, and cooperation with neighboring countries.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_2
• /
• pp.661-667
• /
• 2022

As remote sensing and GIS have been considered to be essential technologies for disasters information production, researches on developing methods for analyzing spatial data, and developing new technologies for such purposes, have been actively conducted. Especially, it is assumed that the use of remote sensing and GIS for disaster management will continue to develop thanks to the launch of recent satellite constellations, the use of various remote sensing platforms, the improvement of acquired data processing and storage capacity, and the advancement of artificial intelligence technology. This spatial issue presents 10 research papers regarding ship detection, building information extraction, ocean environment monitoring, flood monitoring, forest fire detection, and decision making using remote sensing and GIS technologies, which can be applied at the disaster prediction, monitoring and response stages. It is anticipated that the papers published in this special issue could be a valuable reference for developing technologies for disaster management and academic advancement of related fields.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1067-1073
• /
• 2021

Regulations to reduce greenhouse gas emissions from ships are gradually being strengthened. EEXI (Energy Efficiency Existing Index) has been introduced in existing ships, and various studies are aimed at achieving the greenhouse gas emission reduction target are currently underway. In this study, we proposed a method to reduce greenhouse gas emissions through reducing fuel oil consumption by applying a solar power generation system to a pure and truck carrier among existing ships engaged in international voyages. The proposed photovoltaic power generation system consists of a photovoltaic module, an energy storage system, and a power conversion device. To confirm applicability, the system was modeled through a power electronics program, and a simulation was performed. In addition, economic analysis was conducted to check the feasibility of application to real ships, and it was confirmed that significant results were derived in the economical aspect after about 11 years had elapsed.

• Journal of Korean Port Research
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1996

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this, Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows: 1. Among those vessels called at Mokpo Port in 1994, 556 ships(2,736,669 G/T) are oceangoing while 8155 ships(2,587,217 G/T) are domestic. The average size of oceangoing vessels is 4,922,1 G/T, and the domestic is 317,8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165%. 2. The capacity of approaching channel is enough to handle the total traffic volume of 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 - No.5 is 4.5% and No.6 is 30% of 1993's. 5. The utilization rate of LLC(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1289-1295
• /
• 2023

Polyurethane foam insulation required for storing and transporting cryogenic liquefied gas is already widely used as a thermal insulation material for commercial LNG carriers and onshore due to its stable price and high insulation performance. These polyurethane foams are reported to have different mechanical performance depending on the density, and the density parameter is determined depending on the amount of the blowing agent. In this study, density-dependent polyurethane foam was fabricated by adjusting the amount of blowing agent. The mechanical properties of polyurethane foam were analyzed in the room temperature and cryogenic temperature range of -163℃ at 1.5 mm/min, which is a quasi-static load range, and the cells were observed through microstructure analysis. The characteristics of linear elasticity, plateau, and densification, which are quasi-static mechanical behaviors of polyurethane foam, were shown, and the correlation between density and mechanical properties in a cryogenic environment was confirmed. The correlation between mechanical behavior and cell size was also analyzed through SEM morphology analysis. Polyurethane foam with a density of 180 kg/m³ had a density about twice as high as that of a polyurethane foam with a density of 96 kg/m³, but yield strength was about 51% higher and cell size was about 9.5% smaller.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.853-858
• /
• 2005

Recently, various novel numerical models based on Navier-Stokes equation have been developed for calculating wave motions in the sea with coastal or ocean structures. Among those models, Volume Of Fluid (VOF) method might be the most popular one, and it has been used for numerical simulations of wave motions including complicated phenomena of wave breakings. VOF method, however, needs enormous computation time and large computational storage memories in general, thus it is practically difficult to use this method for calculations in the case of random waves because long and stable computation (e.g for more than 100 significant wave periods) is required to obtain statistically meaningful results. On the other hand if the wave motion is potential motion, Boundary Element Method (BEM), which is a much faster and more accurate method than VOF method, can be effectively used. The aim of this study is to develop a new efficient model applicable to calculations of wave motion and/or wave-structure interactions under random waves. To achieve this, a strictly combined BEM-VOF model has been developed by making the best use of both methods' merits; VOF method is used in a restricted fluid domain around a structure where complicated phenomena of wave breakings may exist, and BEM is used in the other domains far from the disturbance where the wave motion may be assumed to be potential. The verification of the model was performed with numerical results for Stokes' 5th order wave propagation and a random wave propagation.