• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.648-650
• /
• 1998

This paper proposes a constructive algorithm for generating the Takagi-Sugeno type fuzzy model through the sequential learning from training data set. The proposed algorithm has a two-stage learning scheme that performs both structure and parameter learning simultaneously. The structure learning constructs fuzzy model using two growth criteria to assign new fuzzy rules for given observation data. The parameter learning adjusts the parameters of existing fuzzy rules using the LMS rule. To evaluate the performance of the proposed fuzzy modeling approach, well-known benchmark is used in simulation and compares it with other modeling approaches.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.155-172
• /
• 2002

Airship technical regulations for certification system of each countries are reviewed to assist the development of medium size airship that can be applied observation and communication relay with the ability of holding position at high altitude.

• Journal of Magnetics
• /
• v.7 no.1
• /
• pp.1-3
• /
• 2002

Piezomagnetic behaviors have been observed far above the Neel temperature in the perovskite-type layer structure compound $(C_{18}H_{37}NH_3)_2MnCl_4$undergoing structural phase transitions. Our observations were well explained by the magnetic and the structural orders coupled together via a magnetostructural coupling attributable to the Dzyaloshinsky-Moriya interaction.

• The Journal of the Korean dental association
• /
• v.22 no.4 s.179
• /
• pp.329-332
• /
• 1984

The author observed a patient of ectodermal dysplasia with oligodontia. The treatments were done as follows: Vital pulpotomy and restorative treatment were done as usual method. Removable type space maintainer was set on the area of primary teeth removed. Follow-up checking were required for the observation of growth and development of the permanent teeth and the jaw.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.710-715
• /
• 1995

Magnetic domains were observed using an image lock-in technique for backscattered electron contrast (Type II) with a 200 kV scanning electron microscope. Backscattered electrons indicate a difference in magnetic domain structures at the upper and lower parts of the upper pole in thin-film heads, changing the acceleration voltage. With this method, it is also possible to observe the domain structure of the thin-film head pole through a 10 to $20\;\mu\textrm{m}$ protective layer, and the upper shield of the MR head through the coil in the resist, alumina overcoat, and upper pole.

• Journal of Trauma and Injury
• /
• v.34 no.3
• /
• pp.187-190
• /
• 2021

A 91-year-old female presented to Chonnam National University Hospital Regional Trauma Center with a lateral compression type III fracture of the pelvis. She was managed non-operatively for a week in the intensive care unit under close observation and had an emergency operation due to delayed onset of an acute obstructed direct inguinal hernia. Traumatic abdominal wall hernias are rare. However, trauma surgeons should always be aware of the possibility of such injuries because of their critical consequences.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.2
• /
• pp.179-182
• /
• 2001

Photocyclizable poly(cinnam-4'-yl methyl methacrylate) derivatives bearing methoxy benzene (PMCMMA), anthracene (PACMMA), and coumarin (PCCMMA) have been synthesized via Heck type reaction. Three different types of polymers are photoreactable usin g linearly polarized UV light and applicable as liquid crystal alignment layer. Anthracence and coumarin containing polymers (PACMMA, PCCMMA) have better thermal stability than PMCMMA. This observation may be attributed to the glass transition temperature elevation due to the bulky size and another photocrosslinking site provided by anthracene or coumarin group.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.45-50
• /
• 1996

This paper mainly describes the wind load assumption of 765kV transmission towers. We analyzed wind velocity data a meteorological observatories to get the wind velocity of 50 years return period by using Gumbel I type extreme value distribution. By multi-correlative regression analysis method, wind velocity at no observation site was obtained. Reference dynamics wind pressure map was obtained from above analysis and the wind pressure was classified as three regio in high temperature season.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.4
• /
• pp.657-667
• /
• 2017

Objectives: The aim of this study was to evaluate the potential of dental erosion by three different types of commercial fermented milk on the enamel surface of bovine teeth. Methods: Forty bovine teeth (four groups of 10) were immersed in fermented milk (experimental groups: liquid type, condense-stirred type and condense-drink type) or mineral water (control group) for 1, 3, 5, 10, 15, 30, 60, 90 and 120 minutes. Enamel surface microhardness was measured before and after treatment with a microhardness tester, and Scanning Electron Microscope (SEM) was used to assess the enamel surface morphology. Results:Changes in enamel surface microhardness (before-after treatment; ${\Delta}VHN$) were significantly different among the four groups (p<0.05). ${\Delta}VHN$ was highest in the liquid type group, followed by the condense-stirred type, condense-drink type, and control groups. The ${\Delta}VHNs$ of three types of fermented milk groups were higher than that of the control group (p<0.05). The liquid type group showed higher ${\Delta}VHN$ than the other two types of condense fermented milk groups (p<0.05). However, there was no significant difference in ${\Delta}VHN$ between the two types of condense fermented milk (p>0.05). The results of SEM observation have shown the most severe surface damage in bovine teeth immersed in the liquid type of fermented milk. Conclusions: In this study, it appears that liquid type fermented milk causes greater development of dental erosion. The physical properties and pH of fermented milk types must be considered for prevention of dental erosion associated with ingestion of fermented milk.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.14 no.1
• /
• pp.135-140
• /
• 1984

In spite of many projections of TMJ, there are rarely satisfactory projections of TMJ. The author traced and measured the P-A cephalograms, which number is 70 in each male and female, them finding the following results. 1. The long axis of the condyle is 19.80㎜ on the right, and 19.89㎜ on the left in male, and that of 18.65㎜ on the right and 18.10㎜ on the left in female. 2. The intercondylar distance is 119.02㎜ in male, and 108.20㎜ in female, resulting that the intercondylar distance in male is much longer than that in female. 3. The right and left deviation of the midline passing through the center of the intercondylar distance and prosthion is +0.37㎜ in male, +0.64㎜ in female, and its range is from -4.6 to +5.7㎜ in male, and from -3.2 to +6.1㎜ in female, resulting that prosthion nearly coincides with midline. 4. The angle of the intercondylar distance and the long axis (vertical angle) is +5.48' in male, and +6.02' in female, resulting that there is a little difference between male and female and the angle of the right is greater than that of the left in both male and female. 5. The typology of the condyle in sum of male and female is; Right: A type 55 (39.3%), B type 66 (47.1%), C type, 12 (8.6%), D type, 7 (5.0%), E type, 0 (0%) Left: A type, 60 (42.9%), B type, 58 (41.4%), C type, 14 (10.0%), D type, 8 (5.7%), E type, 0 (0%) 6. The distribution of the typology between the right and the left is; AA 26 (18.6%), AB 50 (35.7%), AC 10 (7.1%), AD 3 (2.1%) BB 26 (18.6%), BC 13 (9.3%), BD 9 (6.4%), CC 0 (0%), CD 3 (2.1%)