• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2018

In this paper, we present a robust beamforming design to tackle the weighted sum-rate maximization (WSRM) problem in a multicell multiple-input multiple-output (MIMO) - non-orthogonal multipleaccess (NOMA) downlink system for 5G wireless communications. This work consider the imperfectchannel state information (CSI) at the base station (BS) by adding uncertainties to channel estimation matrices as the worst-case model i.e., singular value uncertainty model (SVUM). With this observation, the WSRM problem is formulated subject to the transmit power constraints at the BS. The objective problem is known as on-deterministic polynomial (NP) problem which is difficult to solve. We propose an robust beam forming design which establishes on majorization minimization (MM) technique to find the optimal transmit beam forming matrix, as well as efficiently solve the objective problem. In addition, we also propose a joint user clustering and power allocation (JUCPA) algorithm in which the best user pair is selected as a cluster to attain a higher sum-rate. Extensive numerical results are provided to show that the proposed robust beamforming design together with the proposed JUCPA algorithm significantly increases the performance in term of sum-rate as compared with the existing NOMA schemes and the conventional orthogonal multiple access (OMA) scheme.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.29-32
• /
• 2009

Dense and periodic arrays of nano-sized holes were patterned in oxide thin film on GaAs substrate. To obtain the nano-size patterns, self-assembling diblock copolymer was used to produce thin film of uniformly distributed parallel cylinders of polymethylmethacrylate (PMMA) in polystyrene (PS) matrix. The PMMA cylinders were removed with UV expose and acetic acid rinse to produce PS nanotemplate. By reactive ion etching, pattern of the PS template was transferred to under laid silicon oxide layer. Transferred patterns were reached to the GaAs substrate by controlling the dry etching time. We confirmed the achievement of etching through the removing oxide layer and observation of GaAs substrate surface. Optimized etching time was 90 to 100 sec. Pore sizes of the nanopattern in the silicon oxide layer were 20~22 nm.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.154-165
• /
• 2011

Considering the online idea generation, or web-storming, system would be used differently by space designers depending on their job characteristics, the present study tested the usability of web-storming using a factor correlation table with a designer group in the field. Then, for analyses, the results were compared with the previous findings on the usability of web-storming in a design administrator group to suggest comprehensive measures applicable to web-storming. The questionnaire results were analysed following a process of observation-interpretation-application, and the space design process and web-storming function factors were also analysed based on a factor correlation table. The analyses found that the most correlated space design process in both administrator and designer groups was the schematic design phase, and that the correlation started to lower upon division of labour. The assessment phase was found significantly different between the designer group and the administrator group. The assessment phase showed the second highest correlation in the designer group. In terms of the aspects related to project operation, the correlation was found higher in the designer group. Based on the findings, new applicable measures to each phase of web-storming were derived and summed up to suggest how to take advantage of web-storming in the field.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.263-271
• /
• 2017

The application of mass spectrometry to polymer science has rapidly increased since the development of MALDI-TOF MS. This review summarizes current polymer analysis methods using MALDI-TOF MS, which has been extensively applied to analyze the average molecular weight of biopolymers and synthetic polymers. Polymer sequences have also been analyzed to reveal the structures and composition of monomers. In addition, the analysis of unknown end-groups and the determination of polymer concentrations are very important applications. Hyphenated techniques using MALDI-tandem MS have been used for the analysis of fragmentation patterns and end-groups, and also the combination of SEC and MALDI-TOF MS techniques is recommended for the analysis of complex polymers. Moreover, MALDI-TOF MS has been utilized for the observation of polymer degradation. Ion mobility MS, TOF-SIMS, and MALDI-TOF-imaging are also emerging technologies for polymer characterization because of their ability to automatically fractionate and localize polymer samples. The determination of polymer characteristics and their relation to the material properties is one of the most important demands for polymer scientists; the development of software and instrument for higher molecular mass range (> 100 kD) will increase the applications of MALDI-TOF MS for polymer scientists.

• Membrane and Water Treatment
• /
• v.6 no.5
• /
• pp.365-378
• /
• 2015

Herein, the preparation of anion exchange membrane (AEM) from brominated poly(2,6-dimethyl 1,6-phenylene oxide) BPPO and dimethylaniline (DMA) by phase-inversion process is reported. Anion exchange membranes (AEMs) are prepared by varying the DMA contents. Prepared AEMs show high thermal stability, water uptake (WR) around 202% to 226%, dimensional change ratios of 1.5% to 2.6% and ion exchange capacities (IECs) of 0.34 mmol/g to 0.82 mmol/g with contact angle of $59.18^{\circ}$ to $65.15^{\circ}$. These membranes are porous in nature as confirmed by SEM observation. The porous property of membranes are important as it could reduce the resistance of transportation of ions across the membranes. They have been used in diffusion dialysis (DD) process for recovery of hydrochloric acid (HCl) from the mixture of HCl and ferrous chloride ($FeCl_2$). Presence of $-N+(CH_3)_2C_6H_5Br^-$ as a functional group in membrane matrix facilitates its applications in DD process. The dialysis coefficients of hydrochloric acid ($U_H$) of the membranes are in range of 0.0016 m/h to 0.14 m/h and the separation factors (S) are in range of 2.09 to 7.32 in the $HCl/FeCl_2$ system at room temperature. The porous membrane structure and presence of amine functional group are responsible for the mechanism of diffusion dialysis (DD).

• Membrane Journal
• /
• v.27 no.2
• /
• pp.147-153
• /
• 2017

In this study, we investigated permeation properties of single gas ($N_2$, $O_2$, $CO_2$) through membranes composed of poly(ethylene oxide) (PEO) and poly(ethylene-co-vinyl acetate) (EVA) blend. The prepared membranes showed no new absorbance peaks, which indicate the physical blending of PEO and EVA by FT-IR analysis. SEM observation showed that the crystalline phase of PEO decreased with increasing EVA content in the PEO/EVA mixed matrix. DSC analysis showed that the crystallinity of the PEO/EVA blend membrane decreased with increasing EVA content. Gas permeation experiment was performed with various feed pressure (4~8 bar). The permeability increased in the following order: $N_2$ < $O_2$ < $CO_2$. The permeability of $CO_2$ in PEO/EVA blend membranes were increased with increasing feed pressure, However, the permeability of $N_2$ and $O_2$ were independent of feed pressure. On the other hand, the permeability of all the gases in PEO/EVA blend membranes increased with increasing amorphous EVA content in semi-crystalline PEO. In particular, the blend membrane with 40 wt% EVA showed $CO_2$ permeability of 64 Barrer and $CO_2/N_2$ ideal selectivity of 61.5. The high $CO_2$ permeability and $CO_2/N_2$ ideal selectivity are attributed to strong affinity between the polar ether groups of PEO or the polar ester groups of EVA and polar $CO_2$.

• Applied Microscopy
• /
• v.27 no.3
• /
• pp.333-346
• /
• 1997

The ischemia and reperfusion injury of the skeletal muscles is caused by generation of reactive oxygen during ischemia and reperfusion. It is well known that over 4 hours of ischemia injures the skeletal muscles irreversibly. The author has demonstrated the effects of SOD (superoxide dismutase), DMTU (dimethyl thiourea) and ischemic preconditioning on ultrastructural changes of the muscle fibers in the rectus femoris muscles after 4 hours of ischemia and 1 day and 3 days of reperfusion. A total of 72 healthy Sprague-Dawley rats weighing from 200 gm to 250 gm were used as experimental animals. Under urethane(1.15 g/kg, IP, 2 times) anesthesia, lower abdominal incision was done and the left common iliac artery was occluded by using vascular clamp for 4 hours. The left rectus femoris muscles were obtained at 1 and 3 days after the removal of vascular clamp. The SOD (15,000 unit/kg) or DMTU (500 mg/kg) were administered intraperitoneally at 1 hour before induction of ischemia. The ischemic preconditioned group underwent three episodes of 5 minutes occlusion and 5 minutes reperfusion followed by 4 hours of ischemia and 1 day and 3 days of reperfusion. The specimens were sliced into $1mm^3$ and prepared by routine methods for electron microscopic observation. All specimens were stained with uranyl acetate and lead citrate and then observed with Hitachi-600 transmission electron microscope. The results were as follows: 1. SOD or DMTU alone did not affect the ultrastructure of muscle fibers in the rectus femoris muscles. The electron density of mitochondrial matrix was decreased by ischemic preconditioning. 2. Dilated cisternae of sarcoplasmic reticulum, triad, mitochondria and the loss of myofilament in the sarcomere were observed in the 4 hours ischemia and 1 day reperfused rectus femoris muscles. Markedly changed sarcoplasmic reticulum, triad, disordered or loss of myofilament, indistinct A-band and I-band, and irregular electron lucent M -line and Z-line are seen in the 4 hours ischemia and 3 days reperfused rectus femoris muscles. 3. SOD reduced the changes of organelles in the muscle fibers of the 4 hours ischemia and 1 day reperfused rectus femoris muscles of the rats, but SOD did not affect the changes of muscle fibers in the 4 hours ischemia and 3 days reperfused muscles. On the other hand, DMTU markedly attenuated considerably the ultrastructural change of the 4 hours ischemia and 1 day or 3 days reperfused rectus femoris muscles. 4. By the ischemic preconditioning, the change was attenuated remarkably in the 4 hours ischemia and 1 day reperfused rectus femoris muscles. As the ischemic reperfused changes of muscle fibers were regenerated or recovered by ischemic preconditioning, the ultrastructures of them were similar to those of normal control in the 4 hours ischemia and 3 days reperfused rectus formoris muscles. Consequently, it is suggested that DMTU is stronger inhibitor to ischemic reperfused change than SOD. The ischemia and reperfusion-induced muscular damage is remarkably inhibited by ischemic preconditioning.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.433-452
• /
• 1997

Mongolian gerbil (Meriones unguiculatus) has been as an animal model for studing the neurological diseases such as stroke and epilepsy because of the congenital incompleteries in Willis circle, as well as the investigation of water metabolism because of the long time-survival in the condition of water-deprived desert condition, compared with other species animals. In order to accomplish the this research, first of all another divided the laboratory animals 5 groups of which each group include the 5 animals. In this study were investigated the histological structure in the kidney, measured the plasma osmolalities at the time of sacrifice of indivisual animals, and the body weights every day during water-deprived. The results obtained in this study were summarized as followings: 1. The body weights and decreasing rates of the body weight in water-deprived mongolian gerbil groups were continuosly decreased. 2. The plasma osmolalities were increased from the 5th water-deprived day, after then the gradually increasing reached nearly its equilibrium state at the 10th water-deprived day. 3. The urine volumes were abruptly decreased from the 2th water-deprived day, after then the gradually decreasing patterns were reached nearly its equilibrium state at the 10th day, and stopped the 11th day. 4. In the light microscopical observation of the kidney, glomerular capillary loop thickening, mesangial matrix increasing, sclerosis, glomerular cystic atrophy, interstitial fibrosis, tubular dilatation, mononuclear interstitial inflammation, interstitial mineralization, and hyperplasia of the collecting duct epithelium in the cortex area, were observed from the 10th water deprived day, and the lesions were gradually severe changed as the time lapse. 5. In the electron microscopical findings of the kidney, the degenerative changes of endothelial cell, podocyte and mesangial cell in glomeruli were initially observed on the 10th water-deprived day as well as the degeneration of microvilli and intracellular organelle in the renal tubules.

• Restorative Dentistry and Endodontics
• /
• v.28 no.2
• /
• pp.134-145
• /
• 2003

Mechanical properties and microleakage of two composites [conventional hybrid type DenFil (VERICOM Co., Anyang, Korea) / micro matrix hybrid type Esthet X (Dentsply Caulk, Milford, DE, U.S.A.)] were evaluated to assess whether variable light intensity curing is better than conventional curing technique. Curing was done for 40 seconds in two ways of 2 step soft-start technique and 5 step ramping technique. Three kinds of light intensities of 50, 100, $200{\;}mW/\textrm{cm}^2$ were initially used for 10, 20, 30 seconds each and the maximum intensity of $600 {\;}mW/\textrm{cm}^2$ was used for the rest of curing time in a soft-start curing tech nique. In a ramping technique, curing was done with the same initial intensities and the light intensity was increased 5 times with the same rate to the maximum intensity of $600{\;}mW/\textrm{cm}^2$. After determining conditions that showed no different mechanical properties with conventional technique, Esthet X composite was filled in a class V cavity, which dimension was $4{\times}3{\times}1.5{\;}mm$ and cured under those conditions. Microleakage was evaluated in two ways of dye penetration and maximum gap estimation through SEM observation. ANOVA and Spearman's rho test were used to confirm any statistical significance among groups. The results were as follows : 1 Several curing conditions of variable light intensities resulted in the similar mechanical properties with a conventional continuous curing technique, except conditions that start curing with an initial light intensity of $50{\;}mW/\textrm{cm}^2$. 2. Conventional and ramping techniques were better than soft-start technique in mechanical properties of microhardness and compressive strength. 3. Soft-start group that started curing with an initial light intensity of $100{\;}mW/\textrm{cm}^2$ for 10 seconds showed the least dye penetration. Soft-start group that started curing with an initial light intensity of $200{\;}mW/\textrm{cm}^2$ for 10 seconds showed the smallest marginal gap, if there was no difference among groups. 4. Soft-start technique resulted in better dye-proof margin than conventional technique(p=0.014) and ramping technique(p = 0.002). 5. There was a very low relationship(p=0.157) between the methods of dye penetration and marginal gap determination through SEM evaluation. From the results of this study, it was revealed that ramping technique would be better than conventional technique in mechanical properties, however, soft-start technique might be better than conventional one in microleakage. It was concluded that much endeavor should be made to find out the curing conditions, which have advantages of both aspects or to solve these kinds of problems through a novel idea of polymerization.

• Journal of Korea Foundry Society
• /
• v.11 no.6
• /
• pp.475-481
• /
• 1991

In this study the fabrication technology and mechanical properties of AC8A/$Al_2O_3$ Composites by squeeze casting process were investigated to develope for application as the piston materials that require good friction, wear resistance, and thermal stability. AC8A/$Al_2O_3$ composistes without a porosity and the break of preform were fabricated at the melt temperature of $740^{\circ}C$, the preform temperature of $500^{\circ}C$, and mold temperature of $400^{\circ}C$ under the applied pressure of $1200kg/cm^2$ as the results of the observation of microstructures. As the results of this study, the tensile strength of AC8A/$Al_2O_3$ composites was not increased linearly with $Al_2O_3$ volume fraction and so it seemed not to agree with the rule of mixture, which had been used often in metal matrix composite. Also the tensile strength after thermal fatigue test was little different from that before the test. Consequently it was thought that AC8A/$Al_2O_3$ composites fabricated under our experimental conditions had a good thermal stability and subsequently a good interface bonding. Wear rate(i.e., volume loss per unit sliding distance) of AC8A/$Al_2O_3$ composites was decreased with $Al_2O_3$ volume fraction and the sliding speed at both room temperature and $250^{\circ}C$ and so there was a good correlation between wear rate and hardness. Also the wear rate of AC/8A20% $Al_2O_3$ composities was obtained the value of $1.65cm^3/cm$ at sliding speed of 1.14m/sec as compared with about $3.0\;{\times}10^{-8}cm^3/cm$ hyereutectie Al-Si alloy(Al-16%Si-2%Cu-1%Fe-1%Ni), which applied presently for piston materials. The wear behavior of $Al_2O_3$ composites was observed to a type of abrasive wear by the SEM view of wear surface.