• 전기학회논문지
• /
• 제56권5호
• /
• pp.876-883
• /
• 2007

The magnetic flux leakage(MFL) type nondestructive testing(NDT) method is widely used to detect corrosion, defects and mechanical deformation of the underground gas pipelines. The object pipeline is magnetically saturated by the magnetic system with permanent magnet and yokes. Hall sensors detect the leakage fields in the region of the defect. The defects are sometimes occurred in group. The accuracy of the detecting signals in this defect cluster become lowered because of the complexity of the defect cluster. In this paper, the effects of the multi -defects are analyzed. The detecting signals are computed by 3-dimensional finite element method and compared with real measurement. The results say that, rather than the size of the defects, the effects of the relative position of the multi-defects are very important on the detecting signals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2218-2221
• /
• 1998

Data compression of 3 dimensional objects has limitations such as large data size, slow processing time, uncertainties of noise and measurement errors. Recently, along with activities of information transmission in internet, the researches in 3 dimensional information processing become a very important issue as the exchanges of large data are available. In this paper, we propose a data compression algorithm which first estimates the surfaces of 3 dimensional objects and then apply them to the FCV(Fuzzy c-Varieties) Clustering to obtain 3 dimensional edges and vertices, and represent the results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.107-112
• /
• 1991

The object of this study is to investigate material characteristics and flexural behavior of high strength concrete. Principal causes of variations of high compressive strength include the strength-producing capabilities of cement and silica hume. Compressive strength of 1200 kgf/$\textrm{cm}^2$ is introduced for identifying the effect of the variation of the size of porocity and alternative method of measurement, Acoustic Emition method, is applied to examine the phenominon of concrete failure. The main test variables in the beam element are tensile steel ratios, presence of shear reinforcement, and change of steel shape. The estimation of stress block in the flexural test of this element tends to support the present theory and may suggest a desirable shape of the stress block.

• 천문학회보
• /
• 제46권2호
• /
• pp.42.2-42.2
• /
• 2021

Intraclusterlight (ICL) is diffuse light from stars that are bound to the clusterpotential, not to individual member galaxies. Understanding the formationmechanism of ICL provides critical information on the assembly and evolution ofthe galaxy cluster. Although there exist several competing models, the dominantproduction mechanism is still in dispute. The ICL measurement between z=1 and 2strongly constrains the formation scenario of the ICL because the epoch is whenthe first mature clusters begin to appear. However, the number of high-redshiftICL studies is small mainly because of observational challenges. In this study, based on deep HST WFC3/IR data, we measured ICL of 10 galaxy clusters atredshift beyond unity, which nearly doubles the sample size in this redshiftregime. With careful handling of systematics including object masking, skyestimation, flatfielding, dwarf galaxy contamination, etc., we quantified thetotal amount of ICL, measured the color profile, and examined the transitionbetween BCG and ICL.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.320-324
• /
• 2004

Laser Propulsion is a device that generates thrust using laser energy. Laser-driven In-Tube Accelerator (LITA) has been developed at Tohoku University. LITA is a laser propulsion system that accelerates an object not in an open air but in a tube. Experiments of vertical launching and pressure measurement on the tube wall were carried out and in order to observe the initial state of plasma and blast wave, the visualization experiment was carried out using the shadowgraph method. In this study, the time variation of pressure on the tube wall is numerically simulated solving Euler equation. In order to model the laser energy, heat source function added to the frozen flow Euler equation. Plasma size from the shadowgraph images was used for the initial condition of laser energy input. For verification of the modeling, these results were compared with the previous experimental and numerical results. From these verifications, an analysis of LITA performance will be investigated.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1189-1198
• /
• 2021

When performing remote tasks using robots in nuclear power plants, a 3D shape measurement system is advantageous in improving the efficiency of remote operations by easily identifying the current state of the target object for example, size, shape, and distance information. Nuclear power plants have high-radiation and underwater environments therefore the electronic parts that comprise 3D shape measurement systems are prone to degradation and thus cannot be used for a long period of time. Also, given the refraction caused by a medium change in the underwater environment, optical design constraints and calibration methods for them are required. The present study proposed a method for developing an underwater 3D shape measurement system with improved radiation tolerance, which is composed of commercial electric parts and a stereo camera while being capable of easily and readily correcting underwater refraction. In an effort to improve its radiation tolerance, the number of parts that are exposed to a radiation environment was minimized to include only necessary components, such as a line beam laser, a motor to rotate the line beam laser, and a stereo camera. Given that a signal processing circuit and control circuit of the camera is susceptible to radiation, an image sensor and lens of the camera were separated from its main body to improve radiation tolerance. The prototype developed in the present study was made of commercial electric parts, and thus it was possible to improve the overall radiation tolerance at a relatively low cost. Also, it was easy to manufacture because there are few constraints for optical design.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.255-265
• /
• 2014

This study developed and proposed a pattern that can fit the body and compensate for the defects of the body type by applying shoulder princess line to the torso pattern and including formative characteristics of each object on the study of body shape's change in 40-59 year old middle aged women. The results of this study are as follows; First, according to the analysis of 'Size Korea 2010' such as average, standard deviation, minimum value, and maximum value of 48 items, women showed increase in most of the items except height as they became aged. Second, factor analysis was made to understand the shape component factors of middle aged women and to use them for the body type classification. Third, cluster analysis was made according to the shape of front and sides which should be considered in pattern production based on the factor analysis results, and the body type with the measurement values most similar to the average of direct measurement of 'Size Korea 2010' was set as standard. Fourth, in designing torso patterns through the $1^{st}$ and the $2^{nd}$ wearing experiments according to the body type, body shapes such as Chest Circumference, Waist Circumference, Hip Circumference, and Waist Back Length were considered in pattern design, goodness-of-fit was enhanced with difference in margin according to body type and different margins in front and back, and fitting satisfaction was improved by applying princess line.

• 한국의상디자인학회지
• /
• 제13권1호
• /
• pp.37-46
• /
• 2011

To design a beautiful hood fitting an unspecific individual, focusing on body parts such as the head, neck and shoulder requires body size and type information, which applied by physical factors like size, types, and movements, etc. These parts consist of complicated types and structures. Accurate information should be a priority due to great individual differences and low correlation with other body parts. However, there is not a lot of detailed physical information nor design methods for hood design. Therefore, the purpose of this study is to select a study sample "hood" which is a recently emerging fashion item and to expand the necessary physical information for pattern design and draw body size of wearing part on Hood like head, cerbical portion and shoulder. Extract factors to consist on types and after divided into several types, a study comparing each type's physical characteristics was conducted. In order to do that, body measurement data have been collected by statistical treatment and analyzed reference with statistical treatment. The results of the study are predicted to be important data to develop various hood designs for the recent fashion trend. Factor analysis was conducted through main composition analysis about direct measured item on human body and index items. The results of factor analysis, composed factors of body type in this research object were extracted in total of 3 factors. To categorize the head, neck and shoulders of women in their early 20s women and determine their characteristics, variances with factor analysis became operative for Cluster analysis. With these clusters, women in their early 20s were categorized into three types. The results of this study are considered to affect largely for higher physical suitability on unspecified individuals when allowed absence of reference and the fact that body size only limited to item 'head circumstance' in terms of making hat and hood in the case of recent Korea. For the future, an experimental study of hood production should be conducted by using basic data from this study.

• 패션비즈니스
• /
• 제5권3호
• /
• pp.85-93
• /
• 2001

This study was aimed at reviewing the preceding studies regarding infants' physical characteristics and comparatively examining their apparel specifications among countries, and thereupon, surveying the sizes and specifications of each special infant apparel brand in korea, and thereby, providing for the basic data useful to consumers when they choose infants' apparel sizes and specifications, and at the same time to brand makers for effective exchange of information. Thus, domestic special infant's apparel brands were surveyed for their own sizes and specifications, and thereby, the basic data useful to consumers when they choose their infants' apparel sizes and specifications as well as to brand makers when they exchange information among themselves were produced. The results of this study can summarized as follows: As a result of surveying the general trend of the infant apparel brands in korea, it was found that 5 brands had been established before 1990's, and that the remaining 7 ones had emerged during 1990's. When viewed in terms of brands' originality, it was disclosed that 10 brands were korean originals, while 2 brands were foreign ones licensed. On the other hand, as a consequence of surveying the target age groups of each brand, it was found that the targe age groups differed much ranging from 0 to 72 months or more narrowly from 12 to 24 months, which means that the infant age has yet to be defined for all the brands. In the case of the domestic infant-clothing product respect of inner wear, 8 clothing companies are producing the the outside clothing. In the outside clothing, from 6 months to 36 months' infant is the object, and 6m, 12m, 18m, 24m, 30m, 36m appeared with the fact that it produces in 6 sizes. In the case of the f and the g company which has the difference of size control is big, the f company is producing infant clothing for the age 0 to 72 months in 6 size which the difference of the measurement between the size is a lot to be appear, on the other hand, the g company is producing infant clothing for the age 0 to 6 months in 6 size which the difference of the measurement between the size is small to be appear.

• 한국정보처리학회논문지
• /
• 제2권2호
• /
• pp.185-198
• /
• 1995

본 연구는 소프테워어의 품질을 평가하기 위한 소프트웨어 품질평가 도구의 개발 에 관한 것으로 소프트웨어 품질을 평가하기 위한 체계를 구축하고 소프트웨어 품질 평가 활동을 지원하는 소프트웨어 품질평가도구를 개발하는 것을 목적으로 한다. 소 프트웨어 품질평가 체계는 GQM(Goal-Question-Metrics) 방법론에 의거하여 프로그램의 기능성, 유지보수성, 복잡성 및 객체지향성에 대한 부분을 포함하는 체계로 구성한다. 또한 소프트웨어 품질평가 도구는 개발자, 구매자 및 이용자간의 주관적인 요소를 배 제한 형태로 자동화된 평가를 행하는 것으로 소프트웨어 분석 시스템과 분석 과정을 일관성있게 지원하는 사용자 인터페이스에 대한 부분으로 구분된다. 본 논문의 목적은 소프트웨어 품질을 소프트웨어 개발 중이나 개발 완료후에 평가하여 소프트웨어 개발 비용과 유지보수 비용을 감소함으로써 소프트웨어의 생산성을 향상시키는 것이다.