• 한국산업보건학회지
• /
• 제17권2호
• /
• pp.101-110
• /
• 2007

This study was performed to find out hazardous factors in the loaded works of muscular skeletal disorders(MSDs) for four company attached to dining workers from October 2005 to June 2006. The results are summarized as follows. 1. 42.5% of workers in study group were 40-50 years old, and females were higher than males, and the average of body weight was 70kg, 57kg in males and females, respectively. Working time per day was mostly 7-9hours, and the rate of worker who had never education and training was 46%. 2. The upper part and right part of body were higher than lower part and left part in symptoms of muscular skeletal disorders. Body parts which complained of symptoms were the order of right shoulder(55%), right arm(54%), right hand,(40%) waist(35%), leg(25%), and neck(24%). 3. The results of evaluation in the loaded works of muscular skeletal disorders to cooking, dish supply, preparing side dish, and washing the dishes and cleaning the floor of cooking room using RULA and OWAS checklists was action level 4(potential hazards, needs of change workplace), and the result of evaluation using back compressive force needed control measures as 779.27 lbs~1,274.04 lbs. In a view point of the result of this study, large dining rooms should be designed by ergonomic technology for the work surface height, width, and depth. The height of carrying car should be lower to 70cm, and repetitiveness and handling weight should be reduced by mechanical means, and education and training also should be performed for all of workers positively.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.83-90
• /
• 2011

It has been very important to have an exact evaluation for risk factors in order to prevent WMSDs(Work-related Musculoskeletal Disorders). However, most WMSDs evaluation methods have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of usability analysis on three major evaluation methods(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced observers, analysis for the consistency of the results in terms of different evaluation times, and analysis for the consistency of the results in terms of different job characteristics(based on the part of the automobile). The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced observers. This might be due to the fact that experienced observers have had better ability to detect the important working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced observers, 2) All three checklists applied by experienced subjects did not show any single result significantly different in terms of different evaluation times. This might have to do with high intra-observer reliability from some of previous studies, 3) The five parts of an automobile were selected as five major jobs with different job characteristics in the automobile industry. Specifically, they were door part, front part(hood, etc.), inside part(dash board, seats, etc.), rear part(trunk etc.), and bottom part. All three methods did not show any significant differences for the results from each observers. Further study on this subject would eventually provide a sophisticated evaluating guidelines for WMSDs regarding determination of observer-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.73-77
• /
• 2013

Leisure activities alter overland tourism into marine tourism according to a rise in national income. It is expected that the leisure boat with period of introduction in marine tourism will be developed rapidly. It needs to unite with marine technology, optimized layout design, interior design and so on in order to build a yacht of high quality. Because optimized layout design and interior design technique increase the added value of the yacht, it needs to be convergence technology between Ergonomics, Sensibility Ergonomics, and design technique. In this study, we analyzed traffic line of crews in a sailing yacht and assessed working posture using OWAS, RULA and REBA tools. Also we suggested tips of Ergonomic design in the sailing yacht.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.465-472
• /
• 2011

Objective: The aim of this paper is to introduce ergonomic evaluation methods for agricultural work. Background: Work-related Musculoskeletal Disorders(WMSDs) became a major problem in agriculture industry recently. A number of ergonomics evaluation methods have been developed in order to evaluate the work load for preventing WMSDs. The workload evaluation methods were developed for manufacturing industry. Therefore, these ergonomic evaluation methods were used carefully in agriculture industry because work type in agriculture different from work type in manufacturing. Method: Various references of ergonomic evaluation methods such as OWAS, REBA, RULA, NLE and Snook table have been reviewed for agricultural work. Results: This paper presents the characteristics, the selection and application procedure of ergonomic evaluation methods for agricultural work. Application: These results can be used to provide baseline information for ergonomic evaluation methods.

• 산업경영시스템학회지
• /
• 제34권1호
• /
• pp.97-102
• /
• 2011

This study was performed to design and develop an ergonomic equipment for strawberry sorting and packing in agricultural working environments. Potential risk of work related musculo-skeletal disorders associated with farm workers performing strawberry sorting and packing was analyzed through interviews, field surveys, work measurement, and working posture evaluation. For the evaluation of working posture, we used REBA, OWAS, and RULA assessment methods to identify multi-factorial risk factors. Based on the result of comprehensive assessment, a new concept of multi-level rotating table for strawberry sorting and packing was proposed to modify awkward working postures and improve the effectiveness of the farm work. Finally, the characteristics and effectiveness of new equipment was discussed in terms of improvements in productivity, safety, and subjective ratings of farm workers. The results of analysis showed that working conditions improved significantly.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.93-99
• /
• 2015

Economic burden of work-related musculoskeletal disorder(WMDs) is increasing. Known causes of WMDs include improper posture, repetition, load, and temperature of workplace. Among them, improper postures play an important role. A smart sensor called SensorTag is employed to estimate the trunk postures including flexion-extension, lateral bend, and the trunk rotational speeds. Measuring gravitational acceleration vector in the smart sensor along the tri-orthogonal axes offers an orientation of the object with the smart sensor attached to. The smart sensor is light in weight and has small form factor, making it an ideal wearable sensor for body posture measurement. Measured data from the smart senor is wirelessly transferred for analysis to a smartphone which has enough computing power, data storage and internet-connectivity, removing need for additional hardware for data post-processing. Based on the estimated body postures, WMDs risks can be conviently gauged by using existing WMDs risk assesment methods such as OWAS, RULA, REBA, etc.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 추계학술대회
• /
• pp.43-45
• /
• 2011

본 연구는 예부선 선원이 해상작업 시 발생할 수 있는 근골격계 부담 작업의 위험성을 평가 하기 위해 실행되었다. 근골격계 부담 작업은 예부선 선원들의 인터뷰, 작업 분석, 작업 자세 평가를 통해 분석을 통해 분석이 되었으며, 도출된 근골격계 부담 작업은 인간공학 분야에서 작업자세 평가 도구인 OWAS, RULA, REBA를 활용하여 분석을 실시하였다. 분석을 위해 국내 해운선사에서 운용중인 예선 A호와 부선 B호에서 작업을 하는 예부선 선원들의 각종 작업을 분석하였으며 해당 작업들은 근골격계 위험 수준인 3수준 이상으로 해당 작업이 근골격계에 부담되는 작업이며 작업자세 교정이 필요한 것으로 나타났다. 따라서 예부선 작업환경의 위험성이 외부환경에 대한 위협뿐만 아니라 작업자의 작업자세가 장기적인 위협을 보이고 있음을 보여주었다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.69-78
• /
• 2009

The goal of this study is to propose the effective method of investigating the injurious factors and making improved plans that prevents the workers against musculoskeletal disorders at an autoparts company and the same business field with similar working conditions and process. A questionnaire were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an ergonomic assessment method such as RULA, OWAS were performed to find out harmful factors of workplace and working posture. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the autopart company and the same business field with similar working conditions and process.

• 대한인간공학회지
• /
• 제24권4호
• /
• pp.79-83
• /
• 2005

Efforts to identify jobs or tasks having known risk factors for work-related musculoskeletal disorder can provide the groundwork for changes aimed at risk reduction. An effective identification method is the ergonomic job hazard analysis which breaks a job into its various elements or actions, describes them, measures and quantifies the ergonomics risk factors. Some analytical methods including OWAS, RULA, REBA, and NLE have been used as tools in quantifying the risk factors. But these traditional methods using worksheet or paper are difficult to explain to participants for performing the job hazard analysis in the field, and take a long time. We develop some software tools to implement the analytical methods using EXCEL programs or computer program. These tools developed in this study are faster and easier to perform the ergonomic job analysis than the traditional methods using worksheet.

• 대한인간공학회지
• /
• 제32권1호
• /
• pp.153-158
• /
• 2013

Objective: This study aims to suggest different approaches in analyzing risks associated with musculoskeletal disorders (MSDS) for risk assessment. Background: Upon concluding that the changes in the industrial environments have made it hard to regulate diverse risk factors, the government has implemented a policy for risk assessment. Method: This study has proposed a method, creating programs using Excel that perform qualitative or quantitative analysis, for evaluating risk factors in risk assessments and has applied this in manufacture and service industries. Results: To verify the validity of the developed program, risk assessment has been performed on restaurant chefs as an example. For quantitative evaluation, the study has suggested approaches using the results for REBA evaluation and the analysis report on the work scenes of a fitting-shop in a shipbuilding industry. Application: Constructing and adapting a system using Excel in evaluating risk factors for risk assessments as this study suggests, is expected to contribute to revitalizing risk assessments.