• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.72-73
• /
• 2016

Working Posture is an important factor directly connected with quality and productivity of the construction project. In particular, High-rise building construction is required to manage the working posture due to the repetitive task and unfavorable working condition such as high place work, limited space. However existing construction planning of high-rise building construction has a negative effect on the labor's productivity because it is not insufficiently considered for working posture. Therefore the purpose of this study is to suggest a work that needs improvement by analyzing labor's working posture quantitatively using OWAS method. These results would provide the basic information to improve the productivity of the construction project by supporting the construction plan considering the working posture in high-rise building.

• 한국보육지원학회지
• /
• 제8권2호
• /
• pp.139-155
• /
• 2012

이 연구는 유아교육실제에서 몸의 교육적 의미를 재인식하기 위한 기초자료 제공을 목적으로 인간공학적 방법을 활용하여 바람직한 몸 교육의 방향에 대한 교훈을 얻고자 하였다. 인간공학 활동분석방법으로 가장 많이 활용되는 OWAS기법을 적용하여 D시에 거주하는 유아를 대상으로 비디오 촬영을 한 후 Snap reading하여 일과 활동내 몸 움직임을 분석하였다. 연구결과에 따르면 유아의 몸 움직임은 활동유형에 따라 다른 양상을 나타내었다. 허리와 팔을 중심으로 한 활동별 움직임은 통계적 유의성을 보이지 않았으며, 다리 활동성을 중심으로 활동 군별로 분석한 결과는 대집단, 소집단, 야외활동 순으로 나타나 전체집단 간 평균분석에서 통계적으로 유의하게 야외활동이 다른 활동보다 월등하게 높게 나타났다. 또 최고 및 최저 움직임을 보인 활동들을 independent t-test를 실시한 결과, 허리의 움직임에서 소집단이 야외활동보다, 다리의 움직임에서 야외활동이 대집단보다 유의하게 활발한 것으로 나타났다. 이 연구의 의의는 인체공학적 활동 분석법을 유아의 몸 움직임 측정에 처음으로 도입한 점과 더불어 이런 적용 결과를 바탕으로 최근 급격히 줄어드는 유아실외활동의 잠재적 위험성에 대해 경각심을 일깨웠다는 데서 찾을 수 있다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.138-144
• /
• 2013

The automation technology for overlay welding is needed due to the occurrence of severe corrosion and abrasion on the surface of internal contact in different shape of fittings. In Korea, different shapes of fittings have been manufactured by using the imported equipment of overlay welding automation at some companies. Thus the research on the development of overlay welding automation system (in short, OWAS) for a large L-type tube is urgently needed. In this paper, the investigation is focused on the optimal design of a supporting base for the (currently developing) OWAS of large L-type tube. Specifically we assume that the base which supports the equipment during the process of overlay welding is loaded as self-weight in the direction of gravity through static analysis especially when it is rotated 180 degree on the OWAS. For optimal design of a supporting base for OWAS of large L-type tube, Solidworks(R) (for 3-dimensional modelling) and ANASYS Workbench(R) (for structural analysis) are incorporated so as to proceed an optimization routines based on Response Surface Method (RSM) and Design of Experiment (DOE). In more specific, DOE finds out major factors (or dimensions) of the supporting base by using MINITAB(R). Then the regression equations between design variables (the major factors of supporting base) and response variables (deformation, stress and safety factor for the supporting base), which will be resulted in by RSM, verify the major factors of DOE. In the next step, Central Composite Design (CCD) plans 20 simulations of ANASYS Workbench(R) and then figures out the optimal values of design variables which will be reflected on the manufacturing of supporting base. Finally welding experiment is conducted to figure out the influence of overlay welding quality in applying the optimized design values of supporting base to the actual OWAS.

• 한국산업보건학회지
• /
• 제19권2호
• /
• pp.88-95
• /
• 2009

There are many assessment techniques used for occupational risk factors of MSDs in the workplaces. However, because all ergonomic assesment techniques or tools are based on theoretical background derived from workphysiology, biomechanics, psychophysics, industrial hygiene, work system, and etc, it is impossible to compare the assessment techniques. This study was conducted to compare the excess rates of risk factors among ergonomic assessment techniques and to make alternative methods. Site-visits to 6 automobile products and parts company provided data for process repeated work where the produced data was examined for evaluating the relationship between workplace lay-out and work posture by using ergonomic assessment techniques. We evaluated 157 jobs for simple repeated work and 37 jobs for manual materials handling (MMH). In simple repeated work, the exceeded rates of AC were 36.3% in OWAS method and 93.0% in RULA method. The exceeded rate for RULA method was significantly higher than those for OWAS method (p<0.05). In MMH, the exceeded rates of AC were 80.0% in NLE method and 76.5% in WAC method. Statistically significant differences were not identified in the exceeded rates for NLE and MAC methods (p<0.05). The analyzed results among ergonomic assessment techniques (OWAS, RULA, NLE/WAC) were applied to the same work places performing simple repeated work and manual materials handling simultaneously. The applied results showed statistically significant differences (p<0.05) among ergonomic assessment techniques (OWAS, RULA, NLE/WAC). Exceeded rates of four ergonomic assessment techniques in decreasing order was "RULA>NLE>WAC>OWAS". The RULA method was the strongest assessment technique for automobile products and parts company. We discovered that the results could easily be overestimated or underestimated when the ergonomic assessment techniques were not applied correctly during the evaluation process. Therefore, we recommend using at least 2 methods when evaluating and analysing the results.

• 화약ㆍ발파
• /
• 제23권1호
• /
• pp.1-8
• /
• 2005

화학류발파작업 가운데 장약, 전색, 결선작업은 많은 힘과 시간이 소요되어 작업자세에 따른 직업자의 불편도와 근부담이 증가하게 된다. 따라서 작업상 인적오류를 유발할 가능성이 높아진다. 이러한 원인은 작업자로 하여금 중요한 작업을 누락시키거나 근도반응을 일으켜 결국 사고와 재해로 연결되므로 이에 대한 체계적 연구가 요구된다. 화약발파작업에서 자세의 변화에 따라 발생할 수 있는 위험요인분석에는 OWAS, RULA, REBA, OSHA, JSI, NLE, TVAV, BLUE-X가 있으나 본 연구에서는 OWAS, RULA, REBA기법으로 평가하고 분석하였다. 그 결과 근골격계질환과 2차사고의 발생개연성이 큰 것으로 분석되었다.

• International Journal of Quality Innovation
• /
• 제9권1호
• /
• pp.22-40
• /
• 2008

Unnatural working postures usually cause musculoskeletal problems for workers in work field, especially in traditional industry. Many analysis and survey methodologies have been developed to identify unnatural postures and disorder risks in workplaces. The Ovako Working Posture Analyzing System (OWAS) and Nordic Musculoskeletal Questionnaire (NMQ) are the representative methods and applied widely. This study applied the both tools to investigate the work field of a manufacturing factory of the water heater's case. We divided the manufacturing process into nine workshops, took the pictures of working motions by DV camera and analyzed the postures on OWAS. From the OW AS results, we could identify the risks level of musculoskeletal symptoms as four Action Categories (AC). And from the comparison of OWAS and NMQ results, we could provide the suggestions to improve the working methods and environment. From the results of OWAS, we found that the operators' head/neck and back were above AC3 in some workshops. If the situation continued in long period, the operators might have the risk to get musculoskeletal symptoms. From the investigation of NMQ, we also found that the percentage of aches on neck, shoulders and lower back were higher than other parts of body. The correlation between aches and jobs was more than 75%. So we provided some suggestions to improve: work rotation and adjustment of work surface/height to fit in with Ergonomics. Then the risks of musculoskeletal symptoms would be reduced.

• 한국응급구조학회지
• /
• 제23권1호
• /
• pp.101-112
• /
• 2019

Purpose: The purpose of the study was to contribute to the prevention of musculoskeletal disorders (MSDs) in 119 emergency medical technicians (EMTs) by evaluating ergonomic risk factors of patient lifting work-postures. Methods: Four procedures were evaluated: using long back-board (LBB) on the sitting and standing main stretcher, using variable stretcher on the sitting and standing main stretcher. Wok-postures were assessed during training. Results: In using LBB on the sitting main stretcher, the OWAS-score was Mode:3 (Mean:2.30, Maximum:3), the REBA-score was Mode:9 (Mean:7.61, Maximum:11), requiring improvement soon. In using LBB on the standing main stretcher, the OWAS-score was Mode:3 (Mean:2.33, Maximum:3), requiring as soon as possible corrective action, the REBA-score was Mode:6 (Mean:5.44, Maximum:11), requiring improvement. In using variable stretcher on the sitting main stretcher, the OWAS-score was Mode:1 (Mean:1.85, Maximum:3), not requiring corrective action, the REBA-score was Mode:6 (Mean:6.78, Maximum:11), requiring improvement. In using variable stretcher on the standing main stretcher, the OWAS-score was Mode:3 (Mean:2.84, Maximum:3), requiring as soon as possible corrective action, the REBA-score was Mode:11 (Mean:9.38, Maximum:11), requiring immediate improvement. Conclusion: All four-procedures showed improvement in work-posture. Thereby, required attention and management in training, occupational health professionals should participate in change of lifting-method, and programs aimed at preventing MSDs should be developed and implemented in fire-academy and fire-station.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.194-195
• /
• 2015

Methods for measuring the physical workload of construction workers are classified into posture assessment techniques (i.e., OWAS, RULA, etc.) and physiological measurement techniques (i.e., EMG, heart rate, etc.). The one does not quantify the workload on a specific body part of a worker by considering the weight of the hand tools or materials on hand and time for holding a particular posture. This paper presents a procedure for evaluating a physical demand using the electromyography (EMG) sensor. This study compares the EMG measurement and the posture assessment. The case study is carried out on a masonry operation.

• 대한안전경영과학회지
• /
• 제7권3호
• /
• pp.63-72
• /
• 2005

The purpose of this study is to examine the prevalence of musculoskeletal disorders and ergonomic risk factors for workers of printing business. A self-reporting survey and task analysis using video camera were performed to identify ergonomic risk factors associated with musculoskeletal disorders. We used the OWAS, RULA, and REBA methods to quantify the risk factors, and the results show that the printing business have high risk of work-related musculoskeletal disorders.

• 한국응급구조학회지
• /
• 제21권3호
• /
• pp.59-71
• /
• 2017

Purpose: The purpose of the study was to evaluate the ergonomic risk factors of 119 emergency medical technicians (EMT) with musculoskeletal disorders, performing emergency medical services (EMS) procedures in a firefighter combat challenge. Methods: The evaluated EMT procedures were cardiopulmonary resuscitation (CPR) & intubation, trauma patient assessment, and intravenous (IV) injection. Measurement of working posture was done during training. Results: In CPR & intubation, OWAS-score was 2 (mean 1.9, maximum 4), requiring correction action, while REBA-score was 11 (mean 7.28, maximum 11), requiring immediate improvement. In trauma patient assessment & IV injection, OWAS-score was 4 (mean 2.9, maximum 4), requiring immediate correction action, while the REBA score was 7 (mean 7.5, maximum 11), requiring improvement. Conclusion: Both OWAS score and REBA-score showed improvement of posture and high-risk of musculoskeletal disorders. Occupational health management in EMS procedures during combat challenge and effective injury prevention program in fire stations are warranted.