• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.111-118
• /
• 2009

This study is to analyze the performance of SWH(Solar Water Heating) and GSHP(Ground Source Heat Pump) systems by evaluating their energy efficiency and LCC(Life Cycle Cost) as being applied to the OO hall as a selected building in the Army. The OO hall, used as bathrooms, dining rooms, accommodations and offices, has reinforced concrete structure system with three floors above the ground and one underground, and its total floor area is approximately 2,917$m^2$. Two energy simulations are conducted to predict the yearly cooling and heating energy of the selected building: One is for analysis of an air-conditioning energy consumption using the e-Quest program, and another is for two new-renewable energy facilities as a water heating source using the RETScreen. The installed capacity of two new-renewable energy facilities is determined according to the 5% level of total standard construction cost. As a briefly result, SWH system is more energy-effective than GSHP system. Considering the break-even point, it is expected that SWH can take only 3 years 11 months to pay for itself in savings while the investment of GSHP can be recovered in more than 16 years 6 months.

• Tunnel and Underground Space
• /
• v.18 no.1
• /
• pp.80-89
• /
• 2008

The influence of in-situ rock stress on the stability of an underground rock structure increases as the construction depth become deeper and the scale of a rock structure become larger. In general, hydraulic fracturing stress measurement has been performed in the surface boreholes of the target area at the design stage of an underground structure. However, for some areas where the high horizontal stresses were observed or where the overstressed conditions caused by topographical and geological factors are expected, it is desirable to conduct additional in-situ stress measurement in the underground construction site to obtain more detailed stress information for ensuring the stability of a rock structure and the propriety of current design. The study area was a construction site for the additional underground oil storage facility located in the south-east part of OO city, Jeollanam-do. Previous detailed site investigation prior to the design of underground structures revealed that the excessive horizontal stress field with the horizontal stress ratio(K) greater than 3.0 was observed in the construction area. In this study, a total of 13 hydraulic fracturing stress measurements was conducted in two boreholes drill from the two water tunnel sites in the study area. The investigation zone was from 180 m to 300 m in depth from the surface and all of the fracture tracing works were carried out by acoustic televiewer scanning. For some testing intervals at more than 200 m ind depth from surface, the high horizontal stress components the horizontal stress ratio(K) greater than 2.50 were observed. And the overall investigation results showed a good agreement with the previously performed test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.428-434
• /
• 2020

The one-shot weapon system is destroyed after only one mission. So, the system requires high reliability. Guided missiles are one-shot weapon systems that have to be analyzed by storage reliability since they spend most of their life in storage. The analysis results depend on the model and the ratio of correct censored data. This study was conducted to propose a method to more accurately predict the future failure rate of Air force guided missiles. In the proposed method, the failure rate is predicted by both MTTF (Mean Time To Failure) and MTBF (Mean Time Between Failure) models and the model with a smaller error from the real failure rate is selected. Next, with the selected model, the ratio of correct censored data is selected to minimize the error between the predicted failure rate and the real failure rate. Based on real field data, the comparative result is determined and the result shows that the proposed sampling rate can predict the future failure rate more accurately.

• Composites Research
• /
• v.32 no.6
• /
• pp.395-402
• /
• 2019

The RFI process is an OoA process that fiber mats and resin films are laminated and cured in a vacuum bag. In case that resin film is insufficient to fill empty space in fibers, it makes void defect in composites and this void decrease mechanical properties of the composites. For this reason, non-destructive testing is usually used to evaluate void of manufactured composites. So, in this study, a manufacturing method of standard void specimens, which are able to be used as references in non-destructive testing, was proposed by controlling resin film thickness in the RFI process. Also, a fiber compaction test was proposed as a method to set the resin film thicknesses depending on target voids of manufacturing panels. The target void panels of 0%, 2%, and 4% were made by the proposed methods, and signal attenuation depending on void was measured by non-destructive testing and image analysis. In addition, voids of specimens for tensile, in-plane, short beam and compressive tests were estimated by signal attenuation, and mechanical properties were evaluated depending on the voids.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.10 no.2
• /
• pp.244-251
• /
• 1999

Self-injurious behavior is often showed in mental retardation, especially in autism. Self-injurious behavior has been regarded as a symptom cluster rather than a disease but it is an emergent clinical situation that can directly affect mortality. This case is about a refractory autistic patient who showed a self-injurious behavior of hitting the head repetitively. He was hospitalized and was treated by pharmacotherapy and behavior therapy and for this reason this clinical experience is reported with literature review. The patient is a 7-year old boy who was ward admitted from 1999 April 20 till July 10 into OO hospital OO ward because of self-injurious behavior. During the 12 weeks he had admission treatment. As for the pharmacotherapy, haloperidol was dosed up from 0.5mg to 1.0mg from the 4th week and combination drug therapy was done during the admission with naltrexone 25-50mg. As for the behavioral therapy, Differential Reinforcement of Other behavior was used and regular play therapy was done. To remove the physical restraint, headgear and hard sleeve was used. Currently, OPD follow up treatment is being done and haloperidol 0.5mg and naltrexone 50mg is maintained. The patient’s mother is educated and play therapy is done an hour daily at home. When the patient was released form the hospital, self-injurious behavior was decreased more than the moderate state and remission state is still being maintained at the outpatient clinic.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.164-183
• /
• 2019

The purpose of this study is to develop a STEAM program based on reverse engineering. To achieve the purpose of this study, STEAM program was developed on the subject of autonomous vehicle. The results of this study are summarized as follows. The program was developed based on STEAM program development model based on reverse engineering. Developed in a five step procedure (analysis, design, development, implementation, evaluation) with the subject of autonomous vehicle. First, in the analysis step, we explored the definition, goal, content area, and teaching and learning methods of STEAM based on reverse engineering. We extracted the goals and content areas to be included in the educational program. Second, in the design step, topics were selected through consultation with experts. At this time, based on the linkage between the 2015 revised curriculum and the STEAM curriculum, we selected and organized educational goals and learning contents. Third, in the development step, we developed a teacher 's guidebook and student' s textbook, and applied the program to 71 students in the second grade of OO middle school in Seoul. Fifth, at the evaluation stage, the evaluation was made by experts and students based on the program that was implemented, and revised and supplemented based on the results.

• The KIPS Transactions:PartD
• /
• v.18D no.4
• /
• pp.245-260
• /
• 2011

Mobile Devices, which are developed with the fast growing of the Internet, have flexible internet accessibility and can access the network anywere so that they can execute software applications. However, it is very challenging to deploy highly complex applications on mobile devices since they have limited resources. To overcome the limitation, researches on applying a concept of services to mobile applications have been proposed. Android is one of the popular mobile platforms and is designed to effectively execute mobile applications on the mobile devices having limited resources. Since service-based Android applications, which adopt a concept of services and Android platform, invoke remote services and are built with Android-specific components, they are much different from traditional software applications. Consequently, it is not straightforward to apply object-oriented (OO) analysis and design methods to developing service-based Android applications, although they have been frequently applied to developing traditional applications. In this paper, we present a process to develop service-based Android mobile applications, which extends a traditional OO development process. First, we raise design issues to be considered in developing service-based Android applications. Then, to solve the issues, we present detailed guidelines for essential phases of OO-based development process that are customized to service-based Android applications. Finally, to show applicability of the process, we perform a case study. The proposed design process is effectively utilized as a set of guidelines to develop service-based Android applications more systematically and effectively.

• Parasites, Hosts and Diseases
• /
• v.58 no.6
• /
• pp.709-714
• /
• 2020

Knockdown resistance (kdr) mutations in the voltage-gated sodium channel (VGSC) of mosquitoes confer resistance to insecticides. Although insecticide resistance has been suspected to be widespread in the natural population of Aedes aegypti in Myanmar, only limited information is currently available. The overall prevalence and distribution of kdr mutations was analyzed in Ae. aegypti from Mandalay areas, Myanmar. Sequence analysis of the VGSC in Ae. aegypti from Myanmar revealed amino acid mutations at 13 and 11 positions in domains II and III of VGSC, respectively. High frequencies of S989P (68.6%), V1016G (73.5%), and F1534C (40.1%) were found in domains II and III. T1520I was also found, but the frequency was low (8.1%). The frequency of S989P/V1016G was high (55.0%), and the frequencies of V1016G/F1534C and S989P/V1016G/F1534C were also high at 30.1% and 23.5%, respectively. Novel mutations in domain II (L963Q, M976I, V977A, M994T, L995F, V996M/A, D998N, V999A, N1013D, and F1020S) and domain III (K1514R, Y1523H, V1529A, F1534L, F1537S, V1546A, F1551S, G1581D, and K1584R) were also identified. These results collectively suggest that high frequencies of kdr mutations were identified in Myanmar Ae. aegypti, indicating a high level of insecticide resistance.

• Composites Research
• /
• v.34 no.4
• /
• pp.233-240
• /
• 2021

VaRI(Vacuum assisted Resin Infusion) process, which is cost effective and suitable for manufacturing large-sized composites, is an OoA(Out-of Autoclave) process. For rapid resin infusion in the VaRI process, a DM(distribution media) is placed on top of the fabric. The resin is rapidly supplied in plane direction of the fiber along the DM, and then the supplied resin is impregnated in the out-of-plane direction of fiber. It is difficult to predict the flow of resin because the flow of in-plane direction and the out-of-plane direction occur together, and a 3D numerical analysis program is used to simulate the resin infusion process. However, in order to analyze in 3D, many elements are required in the out-of-plane direction of fabric. And the product size is larger, the longer the analysis time needs. Therefore, in this study, a method was suggested to reduce the time required for flow analysis by simplifying the 3D flow analysis to 2D flow analysis. The usefulness was verified by comparing the 3D flow analysis with the simplified 2D flow analysis at the same conditions. The filling time error was about 7% and the reduction of flow analysis time was about 95%. In addition, by utilizing the constant difference in the flow front between the top, middle, and bottom of the fabric of the 3D analysis, the flow front of the top, middle, and bottom of the fabric can be also predicted in the 2D flow analysis.

• Digital Contents
• /
• no.12 s.139
• /
• pp.76-81
• /
• 2004

마켓팅의 홍수 속에서 참으로 많은 선전문구들을 접하게 된다. 특히 학생 때부터 등수 비교에 익숙해 있던 우리들은 웹사이트의 홍보문안에서도‘OO분야 1위’업체라거나 최초 업체라는 부분을 강조하곤 한다. 상식적으로는 1위가 한 개 업체뿐이어야 하겠지만, 장충동에 원조가 아닌 족발집이 없듯 어지간한 웹사이트 중에선 1위 업체가 아닌 사이트가 없다. 특히 다음과 네이버는 서로 검색부문 1위 업체라고 주장하고 있고, 커뮤니티 분야에는 네이트닷컴까지 가세해 자신들이 1위라며 다툼이 대단하다. 그렇다면, 어떻게 이런 비교가 이뤄지고 있으며 제각기 다른 주장을 펼칠 수 있는지 각 조사방법, 순위비교 사이트에 따른 차이점을 살펴보도록 하자.