• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.199-209
• /
• 1997

A one-pass rice whitener with hard metal blades was developed to solve the problems of the existing one-pass rice whitener. The developed one-pass rice whitener was tested and improved through various milling experiments. It showed high performance such as the capacity of 3.5 t/h, the energy consumption of $1.0 kWh/100kg$, milled rice recovery of 91.6%, broken rice rate of 2.2%, the crack rate of 1.9% at the 750 rpm of the roller shaft, compared with those other domestic and foreign one-pass rice whiteners. Especially, it could whiten broun rice of high moisture (16～l7%) with water sprayed at low internal pressure of less than $0.2 kg/cm^2$ and low temperature due to the characteristics of the cutting part composed of 24 hard metal blades. The developed one-pass rice whitener was industrilized and distributed to some rice processing complexs in one fourth price compared with that of imported one-pass rice whiteners.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 제11회 음성통신 및 신호처리 워크샵 논문집 (SCAS 11권 1호)
• /
• pp.358-363
• /
• 1994

This paper presents the improvement of the SCHMM using discrete VQ and One-Pass algorithm for keywords recognition in Korean continuous speech. The SCHMM using discrete VQ is a simple model that is composed of a variable mixture gaussian probability density function with dynamic mixture number. One-Pass algorithm is improved such that recognition rates are enhanced by fathoming any undesirable semisyllable with the low likelihood and the high duration penalty, and computation time is reduced by testing only the frame which is dissimilar to the previously testd frame. In recognition experiments for speaker-dependent case, the improved One-Pass algorithm has shown recognition rates as high as 99.7% and has reduced compution time by about 30% compared with the currently abailable one-pass algorithm.

• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.98-105
• /
• 1997

Image transformation ahs been widely used in compuater graphics, computer vision, robot vision, and image processing. Image rotation is one of important part of image transformation. In image rotation, a two-pass algorithm has many advantages over a one-pass algorithm in high speed computation. This paper presents a new two-pass algorithm that overcomes the limitations of previously reported effect of interpolation. A brief comparison of existent techniques and the twp-pass algorithm newly suggeste is presented. This paper also present the hardware structure for the two-pass algorithm suggested.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.255-258
• /
• 2008

The DEM (Digital Elevation Model) can be obtained from stereo image pair acquired by LEO satellite. Stereo images may consist of at least two images with different viewing angles to the imaging target for one pass or multiple passes. While each image is generally acquired from each pass in cross-track direction for multiple passes, stereo image pair in along-track direction can be acquired during one pass with attitude control capability for the pitch axis of the satellite. Single pass stereo imaging provides stereo pair image more efficiently on the fact that stereo pair image is generated with less orbit resources and less imaging time consumption. In this paper, the feasibility study result on the stereo pair image collection planning algorithm during single pass is addressed.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.127-128
• /
• 2007

To investigate mechanical property on the low temperature plate weld metal, the two different plates of the same steel grade were welded and evaluated on the multiple pass welds and both side one run welds with different Mo contents welding consumables. The results are summarized as follows; 1) Welds made by no Mo containing wire showed very low impact values for type of material company. 2) Welds made by 0.25%Mo containing wire showed good impact value regardless of both side one run welds and multiple pass welds. 3) Welds made by 0.5%Mo containing wire showed good impact value for both side one run welds, while it was not acceptable value for multiple pass welds.

• 소성∙가공
• /
• 제9권2호
• /
• pp.112-119
• /
• 2000

The roll Pass design is one of the most important processes to design the whole equipment of the rods and bars rolling system. In this study, the roll pass design program named TollRo(Rolling Factory Organizer) was developed. conventional methods to design roll pass were analyzed and a new algorithm to design the dimension of the intermediate groove was introduced. Object oriented programming technology was implemented in this design program. It comprises GUI(Graphic User Interface), function of automatic pass design, function of modifying pass schedule and database of material properties. The developed program can be used to design roll pass with consistency for the rods and bars rolling system. The man-hours for the whole design can be drastically reduced. The design parameters of rolling system can be extracted quickly by this program.

• Journal of information and communication convergence engineering
• /
• 제4권4호
• /
• pp.166-169
• /
• 2006

Almost all network systems provide an authentication mechanism based on user ID and password. In such system, it is easy to obtain the user password using a sniffer program with illegal eavesdropping. The one-time password and challenge-response method are useful authentication schemes that protect the user passwords against eavesdropping. In client/server environments, the one-time password scheme using time is especially useful because it solves the synchronization problem. In this paper, we present a new identification scheme: OPI(One Pass Identification). The security of OPI is based on the square root problem, and OPI is secure: against the well known attacks including pre-play attack, off-line dictionary attack and server comprise. A number of pass of OPI is one, and OPI processes the password and does not need the key. We think that OPI is excellent for the consuming time to verify the prover.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.172-175
• /
• 2001

A novel microstrip type low-pass filter using thin or thick film resistors is proposed to efficiently eliminate harmonic spurious response in stop-band. The proposed low-pass filter shows the spurious suppression enhancement of 20 dB over a conventional one. The designed low-pass filter could be used as a harmonic rejection filter of a local oscillator for Ku-band satellite payload system.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.670-677
• /
• 2016

본 연구는 LNG 저장 탱크 운반선 9% NI Steel에 대한 실험분석과 메타분석 연구이다. 본 연구는 LNG 저장 탱크 운반선 9% NI Steel에 대한 선행연구에 기초해서 메타분석을 수행한 후에, 9% Ni Steel의 패스(pass)와 다층용접(multi pass)이 인장강도(tensile strength)에 미치는 영향을 분석하기 위하여 충격반응검정(impulse-response test)을 통한 실험분석을 수행하였다. 본 연구의 실험분석 결과 다음과 같은 연구결과를 얻었다, 첫째, 9% Ni Steel의 다층용접(multi pass welding)에 대한 인장강도(tensile strength)를 시험한 결과 패스 1부터 패스 3까지 인장강도가 증가하였으나, 패스 3 이후부터 다층용접의 인장강도는 감소하는 것으로 보인다. 둘째, 다층용접(Multi pass welding)이 인장강도(tensile strength)에 미치는 영향을 분석한 결과, 패스(pass), 다층용접(multi pass)이 인장강도(tensile strength) 에 유의한 정(+)의 영향을 미치는 것으로 보인다. 용접시간(welding time)이 인장강도(tensile strength)에 미치는 영향을 분석한 결과, 용접시간(welding time), 인장강도시간(tensile time)이 인장강도(tensile strength) 에 유의한 정(+)의 영향을 미치는 것으로 보인다.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.14-23
• /
• 2007

Welding fabrication invariantly involves three district sequential steps: preparation, actual process execution and post-weld inspection. One of the major problems in automating these steps and developing autonomous welding system is the lack of proper sensing strategies. Conventionally, machine vision is used in robotic arc welding only for the correction of pre-taught welding paths in single pass. However, in this paper, multipass tracking more than single pass tracking is performed by conventional seam tracking algorithm and developed one. And tracking performances of two algorithm are compared in multipass tracking. As the result, tracking performance in multi-pass welding shows superior conventional seam tracking algorithm to developed one.