• Journal of Acupuncture Research
• /
• 제17권4호
• /
• pp.130-138
• /
• 2000

Objectives : When sweating factor is excluded, to know the influence of acupuncture stimulation on electrical resistance. Methods : Regional anaesthesia(Lidocane 2%, 1ml, Subcutaneous injection) is applied to measured regions, 4cm round area including left Neiguan P6. So we can make adiaphoresis. Before and after acupucnture stimulation to Laogong P8, we measured the electrical resistance of anesthetized left Neiguan P6, anesthetized non-acupoint, normal left Ximen P4, and normal right Neiguan P6. For measurment, we use the 1.2V, DC system that has 100$k{\Omega}$ internal resistance Results : Under the adiaphoresis, Acupuncture stimulation makes the significant decrease of electrical resistance. In normal regions, so does it. Conclusions : When the acupuncture stimulation is applied to human boby, the decrease of electrical resistance is due not only to sweat secretion but also to other internal resistance.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 춘계학술대회
• /
• pp.13-28
• /
• 2005

The purpose of this study is to explore conquest plans of the barrier and resistance in innovation management. This paper focuses to understand the model of innovation that reflects adoption process stages and identify the factors that drive the resistance of consumers. Whenever organizations try to plan and implement some kind of innovation in organizations, they confront resistance in many ways. By understanding innovation resistance, organizations can not only design better innovations but can develop strategies to reduce resistance. Thus they accelerate innovation. Understanding the factors that drive the innovation resistance has important implications for both theoretical development and managerial action. These results indicate that people resist innovation strongly when it betrays their value, needs and beliefs or when they felt the pressure on self-conviction and mental risk, loss, and lack of knowledge.

• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.127-140
• /
• 1994

Resistance spot welding has been widely used in the sheet metal joining processes because of its high productivity and convenience. In the resistance spot welding processes the size of molten nugget is a criterion to assess weld quality. Many research have founded on measuring weld nugget size at the same time monitoring welding process parameters such as dynamic resistance and electrode movement. With increasing demand of energy saving, many efforts were made to employ aluminum alloys that are lighter than steel and have relatively equivalent strength to steel in the automobile industry. In this paper, spot weldability of aluminum alloys for various welding conditions were examined by series of experiments. One of the 6000 series (Mg-Si) aluminum alloy, 6383-T4 was chosen, which is currently considered as a substitute for the galvanized steel. Dynamic resistance, electrode movement and corresponding nugget size were observed and compared to the case of steel. Finally, resistance spot welding of dissimilar material (galvanized steel-aluminum alloy) was attempted.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.493-496
• /
• 2003

Electrical characteristic of tracking resistance, volume resistance, insulation breaking strength etc. and mechanical characteristic are required to high voltage insulation insulator silicone rubber. Tracking resistance is adding much ATH to improve tracking resistance as the most important factor among them. But, there is problem that mechanical strength grows worse rapidly adding much ATH. Therefore, this research studied effect that flame retardant gets to tracking resistance during factor that influence to tracking resistance.

• 한국응용곤충학회지
• /
• 제32권4호
• /
• pp.373-381
• /
• 1993

Resistance evolution to organophosphate-based pesticides in apple and pear inhabiting arthropods of western North America extends to many classes of pest and some beneficial species. Resistance management programs to minimize resistance in pests while exploiting it in natural enemies have met with mixed success. Among beneficials, resistances have been exploited mostly among predators of pest mites. Evolution of resistant mites, leafminers, leafhopper, aphids, leafrollers and some internal fruit feeders have led to development of new monitoring methods and means to delay or avoid resistance. But it is resistance to azinphosmethyl in codling moth (Cydia pomonella) that is changing the pest control system and moving it from chemical to biologically-based means. Newly merging IPM system will depend more on use of biological, cultural, behavior and genetic controls. But more selective pesticides also will be needed to augment pheromones, resistant host plants and genetically altered organisms. These more biologically-based tactics will be prone to resistance evolution in pests as well, if used too unilaterally and/or too extensively.

• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.294-303
• /
• 1999

저항 스폿용접은 외관상 말끔하게 용접되고 단시간 용접이 이루어지기 때문에 고품질 용접을 요구하는 제품에 많이 사용되고 있다. 그러나 시편의 동저항 특성을 고려하지 않아 용접중의 스패터가 발생하여 용접품질의 저하를 초래하고 있다. 본 논문는 용접품질 향상의 관점에서 동저항 데이터베이스 구축에 대하여 연구하였다. 구리 위에 주석과 납을 합금한 시편인 경우와 단일 성분인 철에 대해서 다른 용접조건에서 얻어지는 동저항을 비교하여 용접된 시편의 인장강도와 동저항의 관계를 고찰하였다.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.91-96
• /
• 2019

The purpose of this study was to examine the effect of different yarn twisting methods on physical properties. Plain single jersey structured fabrics were knitted from Kevlar yarn, and from Kevlar/HPPE, and from Kevlar/Basalt fiber, and from Kevlar/Glass fiber and Kevlar/Stainless steel fiber blended and core-spun yarns. and then, The fabrics were coated NBR Latex. The physical properties, including tear strength, modulus, degree of penetration, heat resistance, and cut resistance of the knitted fabrics were investigated and compared. Kevlar/HPPE blended yarn fabrics recorded the highest heat resistance (13 Sec.). and Kevlar/HPPE blended yarn fabrics had good cut resistance (Cut Level 4).

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.751-760
• /
• 2019

Since parameter mismatch seriously impacts the efficiency and stability of induction motor drives, it is important to accurately estimate the rotor and stator resistance. This paper introduces a method to directly calculate the rotor flux that is independent of stator and rotor resistance and electrical angle. It is based on obtaining the rotor and stator resistance using the model reference adaptive system (MRAS) method. The method has a lower computation burden and less adaptation time when compared with other rotor resistance estimation methods. This paper builds three coordinate frames to analyze the rotor flux error and rotor resistance error. A number of implementation issues are also considered.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.217-218
• /
• 2019

Fire resistance ceiling system is the structure of which the ceiling installed under the slave of the structure has the fire resistance performance. Because of having the fire resistance performance, fire resistive coatings on steel beams can be reduced and large span structures can be constructed. So, it have advantages of convenience for construction, shorten for construction time and cost reducing. In foreign country, it is general that one system consisting of slave and ceiling is constructed as a fire resistance system, in these cases, gypsum boards are mostly used as ceiling materials. The purpose of this study was to explain the possibility of expanding the use of gypsum boards by securing fire resistance performance of these ceilings.

• 한국항해항만학회지
• /
• 제37권1호
• /
• pp.63-69
• /
• 2013

Since most merchant vessels are mainly influenced by the added resistance in an actual sea, they could be navigated more efficiently if this added resistance could be precisely predicted and then effectively reduced. In this paper, we have computed the effective horsepower based on the resistance performance in still water and then calculated the added resistance in regular wave in order to estimate a ship's propulsion performance on a voyage. Firstly, we have performed experiments using a model of KCS in a circulating water channel to estimate the flow characteristics around a container ship and the ship's resistance in still water. Then we have calculated the motion response function in regular wave as well as the values for the increase in resistance, and evaluated the ship's motion performance in waves according to the calculated response function. It was found that the resistance in waves increased because the ship's motion response value became larger as the ship's speed increased in the case of head sea. The effect of the added resistance could be reduced by maneuvering the ship to the encounter angle of $120^{\circ}$ in areas of long wavelengths and to head sea in areas of short wavelengths.