• 한국추진공학회지
• /
• 제12권3호
• /
• pp.60-67
• /
• 2008

본 연구는 운용중인 항공기의 가스터빈엔진을 유전 알고리즘을 이용한 실시간 결함진단을 통해 엔진 운용의 안정성과 신뢰성을 확보하는 것이 목적이다. 대상엔진인 터보샤프트엔진의 구성품 중 성능 저하는 압축기, 가스발생기 터빈, 동력 터빈 중 한 구성품에서만 발생한다고 가정하였다. 설계점에 비해 탈 설계영역에서의 학습 데이터는 약 200배 이상으로 증가하였으며, 따라서 요구 수렴도를 만족시키기 위한 방대한 학습시간이 요구된다. 진단오차를 만족시키고 학습시간을 단축시키기 위해 최적분할을 사용하였고 그 결과, 오차범위 5% 이내로 진단됨을 확인하였다.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.89-99
• /
• 2006

The study were to assess technical factors between the high score group and the low score group, from the subjects of 16 male national gymnasts, and to analyze the kinematical characteristic and main technical cause on technique of Akopian's 3D motion analysis of the male vaulting game in 2001 classification championship. The result of this study is this. There were not so much difference between the two groups in term; of the time of board contact, pre-flight, and total performance, but it takes shorter time when the players who are in the high point group take down the board, and they take long time for post-flight(p<.01). The high point group has a longer perpendicular distance in the moment of horse taking off, 0.05m on the average, than the low point group. The high point group shows 0.16m higher on the average than the other group in term; of the height of post-flight(p<.01). In the phase of board contact, the range of horizontal velocity at board take on were $7.66m/s{\sim}7.33m/s$, but there weren't significantly statistic differences between two groups. The hight score group were 0.68m/s faster than the low point group at the horizontal velocity at board take off event(<.05). About the average horizontal velocity of deceleration, AG1(-1.95m/s) reduces the speed more than AG2(-1.57m/s)(p<.05). And the hight score group were 0.37m/s faster than the low point group at the vertical velocity at horse take off event(<.05). When board taking off, the projectile angle of com were $38.7{\sim}37.8degree$ on the average. the comparative groups show almost same results. When horse taking off, the HPVy of the high point group were 37.6 degree which were a little higher than the low point group. The angular velocities of the players who takes on the horse with a right hand and then takes off with a left hand in the high point group were 14.97rad/sec, 10.82rad/sec in the low point group. However, the angular velocity of the players who takes on the horse with a left hand and then takes off on a right hand with the high point group were 14.97rad/sec, 15.56rad/sec in the low point group.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.255-256
• /
• 2007

• 대한한방내과학회지
• /
• 제45권2호
• /
• pp.219-233
• /
• 2024

A 69-year-old female diagnosed with idiopathic Parkinson's disease and treated with anti-Parkinsonian medications, including levodopa, for 7 years presented with complaints of wearing-off phenomenon and delayed onset of medication efficacy, resulting in postural instability and feeling of severe exhaustion. The patient underwent a 50-day course of treatment with Bonoesikpungjigyeong-tang formula. The effects of the treatment were evaluated by recording the average time to onset of medication efficacy, the average time to medication wearing-off, and discomfort due to wearing-off phenomenon. Postural instability was assessed using the Numeric Rating Scale (NRS). The patient's overall quality of life was assessed using the EQ-5D-3L. After 50 days of treatment, the average time to onset of medication efficacy decreased, and the average time to medication wearing-off increased. Discomfort due to wearing-off phenomenon and postural instability decreased. This case suggests that Bonoesikpungjigyeong-tang might be an alternative for improving discomfort caused by long-term levodopa intake.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.200-200
• /
• 2011

Although the cut-off probe, a precise measurement method for the electron density, is widely used in the industry, the physics on the wave spectrum of the cut-off is not understood yet, only cut-off point frequency containing the information of electron density has been analyzed well. This paper analyzes the microwave frequency spectrum of the cut-off probe to see the physics behind using both microwave field simulation (CST Microwave Studio) and simplified circuit simulation. The result shows that the circuit model well reproduces the cut-off wave spectrum especially in the low frequency regime where the wavelength of the driving frequency is larger than the characteristic length and reveals the physics of transmission characteristics with frequency as resonances between vacuum, plasma and sheath. Furthermore, by controlling the time domain in solver of the microwave simulator, the cut-off like transmission peaks above the cut-off frequency which has been believed as cavity effect is verified as chamber geometry effect. The result of this paper can be used as the basis for the improvement of cut-off probe.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.346-350
• /
• 2007

Almost all network systems provide an authentication mechanism based on user ID and password. In such system, it is easy to obtain the user password using a sniffer program with illegal eavesdropping. The one-time password and challenge-response method are useful authentication schemes that protect the user passwords against eavesdropping. In client/server environments, the one-time password scheme using time is especially useful because it solves the synchronization problem. It is the stability that is based on Square Root Problem, and we would like to suggest PBSI(Password Based Secure Identification), enhancing the stability, for all of the well-known attacks by now including Off-line dictionary attack, password file compromise, Server and so on. The PBSI is also excellent in the aspect of the performance.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.863-870
• /
• 1999

SOI(silicon on insulafor) was fabricated through the direct bonding using (100) Si wafer and 4$^{\circ}$off (100) Si wafer to investigate the stacking faults in silicon at the Si/SiO2 oxidized and bonded interface. The treatment time of wafer surface using MSC-1 solution was varied in order to observe the effect of cleaning on bonding characteristics. As the MSC-1 treating time increased surface hydrophilicity was saturated and surface microroughness increased. A comparison of surface hydrophilicity and microroughness with MSC-1 treating time indicates that optimum surface modified condition for time was immersed in MSC-1 for 2 min. The SOI structure directly bonded using (100) Si wafer and 4$^{\circ}$off (100) Si wafer at the room temperature were annealed at 110$0^{\circ}C$ for 30 min. Then the stacking faults at the bonding and oxidation interface were examined after the debonding. The results show that there were anomalies in the gettering of the stacking faults at the bonded region.

• 한국조명전기설비학회지:조명전기설비
• /
• 제8권3호
• /
• pp.27-35
• /
• 1994

네온사인의 점멸에 의한 절전방안을 강구하기 위한 연구로서 1[kW]규모의 네온사인을 제작하여, 점멸속도 및 점등시간비 등의 변화에 따른 네온사인의 소비전력량을 조사하였다. 본 실험에서 점멸주기(T)는 1.0, 2.0, 4.0 및 8.0[sec]이며, 점등시간비(D)는 25, 50, 75 및 100[%]로 설정하였다. 정밀한 측정 데이터를 얻기 위하여 전력에너지 분석기가 사용되었다. 실험결과, 점멸주기(T)가 2.0[sec]보다 큰 경우 네온사인의 소비전력량은 T의 변화에 영향이 없으나, 그 이하인 경우에는 소비젼력량이 감소되었다. T 및 D가 다같이 작은 경우에 소비전력량은 최소가 되며, 본 실험 조건에서 T=1.0[sec] 및 D=25[%]인 경우 소비전력량은 연속점등시에 비해 83.0[%]의 감소를 보였다.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.1-11
• /
• 2005

The study were to assess technical factors between the high score group and the low score group, from the subjects of 8 male national gymnasts, and to analyze the kinematical characteristic and main technical cause on technique of Kasamatsu movement on Vault. The result of this study is this. In case of horse contact time the high score group was swifter than low score group, and there was significant difference between the high score group and the low score group(<.01). On high score group the time of taking on from horse showed shorter than that of taking off from horse, while of the low score group the time of taking on the horse was similar to that of taking off from horse on the average. And in time of pre-flight the high score group on average the was 0.16sec shorter times than the low score group, and so there was significantly difference between groups(<.05). Also It is a characteristic that the high score group was short in horse contact time and longer in post-flight. In the horizontal distance of post-flight, the high score group was 0.11m longer than the low score group and there was significantly statistic difference between groups(<.05). In the vertical height of the cog in Post-flight's phrase, the high score group was 0.15m higher than the low score group and there was significantly statistic difference between groups(.<01). The horizontal velocity and vertical velocity in the event of taking on and off Beat board and Vault weren't significantly statistic differences between two groups. In the slow-down of average horizontal velocity during keeping contact with the beat board, the high score group was larger than the low score group. And in an increased average vertical velocity during keeping contact with the beat board, the high score group was even larger than the low score group. In the projectile angle of cog in taking off the beat board, 40.2deg., the angle of low score group and 39.5deg., the angle of high score group are nearly alike. In the projectile angle of cog in taking off the beat, the high score group showed 1.6Wt larger on average than the low score group. However the average reaction force on the board and Vault wasn't almost different between two groups, showed 0.3~0.6Wt larger in the high score group.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권7호
• /
• pp.339-350
• /
• 2002

Pole arcs, turn-on angle, and turn-off angle are major design factors, which affects Switched Reluctance Motor's torque performance. If these design factors are considered independently, the enhancement of SRM performance is restricted. Therefore, we need to consider pole arcs, turn-on angle and turn-off angle at the same time, when we design SR. In this paper, we analyze how these factors affect to torque ripple and average torque by using dynamic Finite Element Method(FEM) with derive circuit and present the good design results according to the various speeds. Especially, we formulate turn-on and turn-off angle from a voltage equation and present effective design range.