• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.42-44
• /
• 2008

In this study, we report an electrical properties of green OLEO, using the changed thickness of Al Layer. We investigated the electrical properties of OLEOs by IVL and optical properties by EL spectrum. The fundamental structure of green OLEOs was ITO anode/TPD($400{\AA}$)/$Alq_3(600{\AA})$)/LiF($10{\AA}$)/Al($200{\sim}600{\AA}$) cathode. The threshold voltage was low value according to the more thin Al layer. The luminance was increased by decreased cathode layer. The threshold voltage was 12V and wavelength was 530nm at $200{\AA}$ cathode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.54-55
• /
• 2006

Organic light-emitting diodes(OLEOs) are attractive because of possible application in display with low operating voltage, low power consumption, self-emission and capability of multicolor emission by the selection of emissive material. We investigated the effects of deposition rate on the electrical characteristics, physical characteristics and optical characteristics of OLEOs in the ITO(indium-tin-oxide)/N.N'-diphenyl-N,N'-bis(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/Al device. We measured current density, luminous flux and luminance characteristics of devices with varying deposition rates of TPD and $Alq_3$. It has been found that optimal deposition rate of TPD and $Alq_3$ were respectively $1.5{\AA}/s$ from the device structure. An AFM measurement results, surface roughness of the deposited film was the lowest when deposition rate was $1.5{\AA}/s$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1026-1029
• /
• 2002

We report the electric properties of organic light emitting diodes (OLEDs) by controlling the carrier density according to the crystalline of copper(II) phthalocyanine(CuPc) and the irradiation light intensity. OLEDs were constructed with indium tin oxaide (ITO)/CuPc/triphenyl-diamin (TPD)/tris-(8-hydroxyquinoline)aluminum (Alq3)/Al. The transport properties of OLEDs were changedby the heat-treatments of CuPc. The irradiation of red and blue light exciting CuPc, TPD and Alq3. And then we observed the carrier density of OLEDs.

• 한국전기전자재료학회논문지
• /
• 제22권6호
• /
• pp.512-515
• /
• 2009

We have fabricated blue phosphorescent organic light emitting diodes (PHOLEDs) using a 3,5'-N,N'-dicarbazole-benzene (mCP) host and iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$] picolinate (Flrpic) guest materials, The Flrpic was partially doped into the mCP host layer, for investigating recombination zone, current efficiency, and emission characteristics of the blue PHOLEDs. The recombination of electrons and holes takes place inside the mCP layer adjacent to the mCP/hole blocking layer interface. The best current efficiency was obtained in a device with an emission layer structure of mCP (10 nm)/mCP:Flrpic (20 nm, 10%). The high current efficiency in this device was attributed to the confinement of Ffrpic triplet excitons by the undoped mCP layer with high triplet energy, which blocks diffusion of Ffrpic excitons to the adjacent hole transport layer with a lower triplet energy.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.38-44
• /
• 2006

Vacuum deposited copper phthalocyanine (CuPc) was placed as a thin interlayer between indium tin oxide (ITO) electrode and a hole transporting layer (HTL) in a multi-layered, organic, light-emitting diode (OLEOs). The well-stacked CuPc layer increased the stability and efficiency of the devices. Thermal annealing after CuPc deposition and magnetic field treatment during CuPc deposition were performed to obtain a stacked-CuPc layer; the former increased the stacking density of the CuPc molecules and the alignment of the CuPc film. Thermal annealing at about 100$^{circ}C$ increased the current flow through the CuPc layer by over 25$\%$. Surface roughness decreased from 4.12 to 3.65 nm and spikes were lowered at the film surface as well. However, magnetic field treatment during deposition was less effective than thermal treatment. Eventually, a higher luminescence at a given voltage was obtained when a thermally-annealed CuPc layer was placed in the present, multi-layered, ITO/CuPc/NPD/Alq3/LiF/AI devices. Thermal annealing at about 100$^{circ}C$ for 3 h produced the most efficient, multi-layered EL devices in the present study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.49-51
• /
• 2006

OLEOs was fabricated by PLD method. Wet etching process and plasma treatment of ITO on the glass were performed to extend the lifetime of the OLED and increase its brightness. The NPB, $Alq_3$, Li-Benzoate and AI layers on ITO pattern on the glass were deposited by PLO method, sequentially. When the etched ITO was treated by $O_2$ plasma with RF power of 50W, the best result was obtained. The lifetime of the OLED treated by $O_2$ plasma was extended from 3,770sec to 12,586sec compared to that without the plasma treatment.