• Current Research on Agriculture and Life Sciences
• /
• v.8
• /
• pp.45-50
• /
• 1990

This study was carried out ot investigate the effects of fetal calf serum (FCS) and gonadotropins supplemented to the medium on maturation and fertilization in vitro of porcine follcular oocytes. Ovaries were obtained from gilts at local slaughter-house. Oocyte-cumulus complexes were recovered by puncturing the ovarian follicles(3~5 mm in diameter). The complexes from individual ovaries were pooled in a $0.4m{\ell}$ droplet of medium covered with paraffin oil, then washed twice in fresh droplet and cultured for 36hrs in culture media according to experimental conditions. Boar epididymal spermatozoa were capacitated by preincubation for 4hrs in m-KRB medium and the preincubated spermatozoa were insemenated in the fertilization medium containing the cultured oocytes. The results obtained in this study are summarized as follows: 1. The maturation rates of oocytes cultured in m-KRB and m-KRB supplemented to 10% FCS were 82 and 37%, respectively. When PMSG, hCG. and PMSGt hcG($10Iu/m{\ell}$) were added to the media supplemented to 10% FCS, the maturation rates were 66, 58 and 68%, respectively. 2. Expansion of cumulus cells was not occured in m-KRB and m-KRB supplemented to 10% FCS. However, when PMSG, hCG and PMSG+hCG($10Iu/m{\ell}$) were added to m-KRB supplemented to 10% FCS, the expansion rates of cumulus cell layers were 92, 13 and 91%, respectively. 3. When oocytes were mltured in m-KRB, the rates of penetration and formation of male pronucle: were 93 and 7%, respectively. By adding FCS and gonadotropin to m-KRB, the penetration and formation of male pronuclei were 100 80%, respectively.

• Journal of Distribution Research
• /
• v.17 no.2
• /
• pp.93-115
• /
• 2012

This study empirically examines the impact of changes in market shares among retailing types on the price index. The retailing type is classified into 6 groups: department store, big mart, super market, convenient store, specialty merchant, and on-line store. The market shares of retailing types are calculated by the ratio of each retailing type monthly sales to total monthly retailing sales in which total retailing sales is the sum of each retailing type sales. We employed several price indices: consumer price index (CPI), CPI for living necessaries, and fresh food price index. In addition, this study used fundamental price indices based on 25 product families as well as 42 representative products. The empirical model also included several variables in order to control for the macroeconomic effects and those variables are the exchange rate, M1, an oil price, and the industrial production index. The data is monthly time-series data spanning over the period from January 2000 to December 2010. In order to test for the stability of data series, we conducted ADF test and PP test in which the model and length of lag were determined by the relevant previous literature and based on the AIC. The empirical results indicate that changes in market shares among retailing types have impacts on the price index. Table A shows that impacts differ as to which price index to use and which product families and products to use. For department store, it lowers the price of food and non-alcoholic beverages, home appliances, fresh food, fresh and vegetables, but it keeps the price high for fresh fruit. The big mart retailing type has a positive impact on the price of food, nut has a negative effect on clothing and foot wear, non-food, and fresh fruit. For super market, it has a positive impact on food and non-alcoholic beverages, fresh food, fresh shellfishes, but increases the price of CPI for living necessaries and non-food. The specialty merchant retailing type increases the price level of CPI for living necessaries and fresh fruit. For on-line store type, it keeps the price high for CPI for living necessaries and non-food as well as fresh fruit. For the analysis based on 25 product families shows that changes in market shares among retailing types also have different effects on the price index. Table B summarizes the different results. The 42 representative product level analysis is summerized in Table C and it indicates that changes in market shares among retailing types have different effects on the price index. The study offers the theoretical and practical implication to these findings and also suggests the direction for the further analysis.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.69-78
• /
• 2010

In order to investigate the degree of household dust contamination, 48 samples of household dust (24 from urban area and 24 from rural area) in Daegu city were collected in vacuum cleaner during January to February 2009. Samples were sieved below 100 ${\mu}m$, and 14 elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, Zn) were analyzed using ICP after acid extraction. Results obtained from the source assessment of trace elements using enrichment factor showed that Ca, Fe, K, Mg, Mn, Na, and V were influenced by natural sources such as weathered rock and resuspended soil, while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources such as fuel combustion and waste incineration. Concentrations were remarkably higher in components from natural sources than in components from urban anthropogenic sources. Household dust in urban area was more affected by anthropogenic sources compared with that of rural area. Pollution index of heavy metals revealed that urban area was 1.8 times more contaminated with heavy metal components than rural area. The correlation analysis among trace elements indicated that components were correlated with natural sources-natural sources (Al-Mg, Al-Mn, Fe-Mn) and natural sources-anthropogenic sources (Al-V, Fe-Cr, V-Mn) in both urban area and rural area. Trace element components of rural area were more correlated than those of urban area. Houses that use oil for heating fuel had relatively higher contents of heavy metals rather than those using gas or electricity for heating fuel. Houses with children also had higher contents of heavy metals. In addition, the age of houses was found to influence the heavy metal levels in household dusts, with older houses (>10years) having higher concentrations than newer houses (<10years) and houses located near the major road (<10 m) were found to have relatively higher heavy metal levels in household dust.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.783-791
• /
• 2015

A fluidized-bed reactor with an inside diameter of 0.1 m and a height of 1.2 m was used to study the effect of steam and catalyst additions to air-blown biomass gasification on the production of producer gas. The equipment consisted of a fluidized bed reactor, a fuel supply system, a cyclone, a condenser, two receivers, steam generator and gas analyzer. Silica sand with a mean particle diameter of $380{\mu}m$ was used as a bed material and calcined dolomite ($356{\mu}m$), which is effective in tar reduction and producer gas purification, was used as the catalyst. Both of Korea wood pellet (KWP) and a pellet form of EFB (empty fruit bunch) which is the byproduct of Southeast Asia palm oil extraction were examined as biomass feeds. In all the experiments, the feeding rates were 50 g/min for EFB and 38 g/min for KWP, respectively at the reaction temperature of $800^{\circ}C$ and an ER (equivalence ratio) of 0.25. The mixing ratio (0~100 wt%) of catalyst was applied to the bed material. Air or an air-steam mixture was used as the injection gas. The SBR (steam to biomass ratio) was 0.3. The composition, tar content, and lower heating value of the generated producer gas were measured. The addition of calcined dolomite decreased tar content in the producer gas with maximum reduction of 67.3 wt%. The addition of calcined dolomite in the air gasification reduced lower heating value of the producer gas. However The addition of calcined dolomite in the air-steam gasification slightly increased its lower heating value.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Korean Journal of Plant Resources
• /
• v.31 no.1
• /
• pp.77-85
• /
• 2018

The cultivation area of rapeseed (Brassica napus L.) has been increased for oil production and landscaping purpose in Korea. However, as the color of rapeseed flower is very simple, diversified flower color is necessary to improve landscape effect. Interspecific and intergeneric crosses between rapeseed (Brassica napus) and three Cruciferae crops were performed in order to grow diverse flower color of rapeseed. The silique formation rate of interspecific cross rapeseed with cabbage (B. oleracea L) was relatively high (65.8%) and higher than intergeneric cross with rapeseed and radish (Raphanus sativus L.), rapeseed and Orychophragmus, respectively. During silique developing period after artificial pollination, there were many siliques without seeds due to the failure of fertilization. The average number of seed per silique obtained from cross rapeseed and cabbage, rapeseed and radish, rapeseed and O. violaceus were 0.12, 0.4 and 0.12, respectively. The phenotypes of $F_1$ hybrid plants from cross rapeseed and Cruciferae crops were mostly similar to maternal line, but leaf length and leaf width were increased. The interspecific cross of rapeseed and cabbage generated ivory color of flower which is the medium color of parents, and intergeneric cross of rapeseed and O. violaceus created entities with larger flowers which seems to enhance landscape effect. The fatty acid composition of most hybrid seeds intermediated of the two parents for oleic acid, linoleic acid and linolenic acid, content. Whereas hybrid of rapeseed and radish produced less erucic acid than radish parent.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Journal of agricultural medicine and community health
• /
• v.26 no.2
• /
• pp.161-179
• /
• 2001

Recent patterns of infections with digenetic larval trematodes from fresh-water fish were studied in five locations of the river Taega during the period from October, 1998 to September, 2000, and compared with the data reported previously in the same river. The fish were collected using following techniques ; fishing, throwing a castnet, and using a bait of crushed oil cake in a transparent plastic bowl. Of 19 species of fish examined, eight species of encysted larvae, Clonorchis sinensis, Cyathocotyle orientalis, Centrocestus armatus, Clinostomum complanatum, Exorchis oviformis, Metagonimus species, Metacecaria hasegawai, and Metorchs orientalis, and two kinds of undetermined cyst A and C were found. The encysted larvae of Exorchis oviformis were found most frequently from 12 species of fresh-water fish, followed by Metacercaria hasegawai larvae from 9 species, the cyst of Clonorchis sinensis and Cyathocotyle orientalis from 7 species, Centrocestus armatus from 3 species, Clino- stomum complanatum from 2 species, and Metorchis orientalis from 1 species. The infection rates of fish with Clonorchis sinensis larvae were lower than those reported in 1993, whereas their intensity of infection was found lowered in 3 species, Pungtungia herz I, Saurogobio dabry i, and Squalidus jap onicus coreanus. The infection rates and intensity of 6 species of fish with Metagonimus sp ecies larvae were lower than the results in 1993, while the rates in several species of fish with Exorchis oviformis rather higher. The encysted larvae of Cyathocotyle orientalis, Metacercaria hasegawai, and Metorchis orientalis showed variations in infection rates of fish in 1993 and in the present study. However, It was impossible to compare the infection rates for the encysted larvae on the scales, fins and tail as they varied so considerably in both 1993 and 2000 surveys. This study indicate that the rate of infection with digenetic larval trematodes in fresh-water fish was still relatively high in the river Taega, and the metacercarial burden in the fish varies greatly by different fish in 1993.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.1
• /
• pp.20-29
• /
• 2010

Naringin has antioxidant and antihyperlipidemic properties, however, phenolic compounds including naringin are unstable in the presence of light, heat and oxygen. Beta-cyclodextrin ($\beta$-CD) is a cyclic heptamer composed of seven glucose units that enhances the stability and solubility of molecules through the formation of inclusion complexes. This study was conducted out to compare the effects of CD-naringin (CD-N) inclusion complexes with naringin on lipid metabolism in high fat-fed animals. Male C57BL/6 mice were fed either CD-N (0.048%, w/w) or naringin (N, 0.02%, w/w) in a 20% high-fat (HFC, 15% lard, 5% corn oil, w/w) diet for 10 weeks. Orlistat (Xenical, 0.01%, w/w) was used as a positive control (PC). There were no differences in body weight, food intake, liver and heart weights, plasma triglyceride(TG), leptin, adiponectin, resistin, IL-$1{\beta}$ and IL-6 concentrations, and hepatic $\beta$-oxidation, carnitine palmitoyl transferase(CPT), glucose-6-phosphate dehydrogenase (G6PD) and malic enzyme activities between the HFC and CD-N groups or between the HFC and N groups. However, both CD-naringin and naringin supplementation les to a significant reduction in the epididymal and perirenal white adipose tissue weights, plasma free fatty acid, insulin and blood glucose concentrations, hepatic cholesterol and TG contents and hepatic fatty acid synthase (FAS), phosphatidate phosphohydrolase (PAP) and HMG-CoA reductase activities compared to the HFC group. The plasma HDL-cholesterol concentration was significantly higher in CD-N and N groups than in HF and PC groups. These results indicate that both CD-naringin and naringin supplementation effectively improved plasma and hepatic lipid metabolism without differences between CD-N and naringin groups.

• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.123-158
• /
• 2009

An attempt was made to stimulate future research by providing exemplary information, which would integrate published knowledge to solve specific pest problem caused by resistance. This review was directed to find a way for delaying resistance development with consideration of chemical(s) nature, of mixture, rotation, or mosaics, and of insecticide(s) compatible with the biological agents in integrated pest management (IPM). The application frequency, related to the resistance development, was influenced by insecticide activity from potentiation, residual period, and the vulnerability to resistance development of chemical, with secondary pest. Chemical affected feeding, locomotion, flight, mating, and predator avoidance. Insecticides with negative cross-resistance by the difference of target sites and mode of action would be adapted to mixture, rotation and mosaic. Mixtures for delaying resistance depend on each component killing very high percentage of the insects, considering allele dominance, cross-resistance, and immigration and fitness disadvantage. Potential disadvantages associated with mixtures include disruption of biological control, resistance in secondary pests, selecting very resistant population, and extending cross-resistance range. The rotation would use insecticides in high and low doses, or with different metabolic mechanisms. Mosaic apply insecticides to the different sectors of a grid for highly mobile insects, spray unrelated insecticides to sedentary aphids in different areas, or mix plots of insecticide-treated and untreated rows. On the evolution of pest resistance, selectivity and resistance of parasitoids and predator decreased the number of generations in which pesticide treatment is required and they could be complementary to refuges from pesticides To enhance the viability of parasitoids, the terms on the insecticides selectivity and factors affecting to the selectivity in field were examined. For establishment of resistant parasitoid, migration, survivorship, refuge, alternative pesticides were considered. To use parasitoids under the pressure of pesticides, resistant or tolerant parasitoids were tested, collected, and/or selected. A parasitoid parasitized more successfully in the susceptible host than the resistant. Factors affecting to selective toxicity of predator are mixing mineral oil, application method, insecticide contaminated prey, trait of individual insecticide, sub-lethal doses, and the developmental stage of predators. To improve the predator/prey ratio in field, application time, method, and formulation of pesticide, reducing dose rate, using mulches and weeds, multicropping and managing of surroundings are suggested. Plant resistance, predator activity, selective insect growth regulator, and alternative prey positively contributed to the increase of the ratio. Using selective insecticides or insecticide resistant predator controlled its phytophagous prey mites, kept them below an economic level, increased yield, and reduced the spray number and fruits damaged.