• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.210-214
• /
• 2010

Standard about OID(Object Identifier) to implement on Internet is discussed at ITU-T, ISO/IEC. The OID should be stored and searched for object on Internet, which is called 'ORS(OID Resolution System)'. The ORS is made by international standard for identifying RFID code types, and in the future would be discussed for USN, u-Health, etc. Therefore, this paper describes the current status of the international standard discussing ORS concept, system structure and protocol, the present issue of the ORS used for RFID and the method for USN services.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.738-740
• /
• 2012

최근 다양한 산업간 융 복합화 및 사물인터넷 출현에 따른 세계적으로 유일하게 객체를 식별할 수 있는 객체식별자(OID)의 중요성이 커지고 있으며 인터넷 기반으로 객체식별자 및 관련 정보를 해석할 수 있는 OID 해석시스템을 활용한 다양한 분야에서의 응용서비스 개발이 예상된다. 이에 본 논문에서는 OID 해석시스템 연동을 위한 클라이언트 프로그램의 설계 및 구현방안을 제안한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.549-557
• /
• 2021

In this research, we will use the existing OID sensor environment for smart robots, which are a type of educational robot, but we would like to propose that the problem of running be handled by a program. Maybe you have driving information We are building a driving test environment focusing on environment, position recognition, route planning, obstacle avoidance and path reset, and it is not the average final error rate, but the time when the error increases The experiment was conducted by a household that catches the moment of recalibration. Through the process, stable running results were obtained compared to the previous experiment. In this research, I think that it will be a development method that can improve the running performance of educational robots equipped with low-cost sensors currently on the market.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.135-142
• /
• 2016

The purpose of this study is to evaluate propriety of using SID 180cm at Chest PA examination and to find effect of geometrical cause to the image. XGEO-GC80, INNOVISION-SH, CXDI-40EG detector and a chest phantom designed self-production was used for this study. Images were acquired at SID 180cm with changing the factor OID as 0, 75 and 83mm and were analyzed by Centricity Radiography RA1000 PACS system. Statistical program was used the SPSS (Version 22.0, SPSS, Chicago, IL, USA), p-value(under 0.05) was considered to be statistically significant. In OID 0 mm was enlarged about 2.7~3.5 mm than the actual degree of the HS, BS of phantom in all equipments. Compared with the calculated magnification has been expanded 1.6~2.8% when viewed. The OID 75 mm with OID 83 mm was extended from the CS and BS 6~8 mm range. Compared to the calculated values, the measured values are expanded from 6.1 to 7.9%. CS and BS according to the OID change showed a statistically significant difference (p<0.05) among each group, the post-analysis only OID 0 mm group appeared as an independent group, 75 mm and 83 mm are separated in the same group It was. But had no statistically significant difference could change depending on the OID (p>0.05), post-mortem analysis showed, both in the same group. Heart sizes appears larger than actual size 6~8 mm at chest PA examination which is enlarged 6.1~7.9% more than the actual theoretical value. We can find magnification of the image because of the increase of the OID due to technical limitations between cover of standing detector and the image plate. so we suggest to have occurred between them when considering the need to adjust the equipment installed by the SID to match the characteristics of the equipment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06a
• /
• pp.127-128
• /
• 2007

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.34-50
• /
• 2012

This study set out to define a communication environment between an ITS center and field device required to be introduced in the nation in order to guarantee the interoperability, compatibility, and global competitiveness of communication between them in the nation. It also aimed to establish technical and policy plans for its introduction, develop an emulator for information exchange, and apply VMS by way of showing an example, thus testing its validity. First, a standard environment for information exchange between an ITS center and field device required to be introduced in the nation was defined as a dual protocol between DATEX and SNMP. The study also proposed a message definition system including meta-attribution definition and OID introduction. The study then suggested technical and policy plans for its introduction including securing enough feasibility with feedback through a model project of standard introduction, offering education and promotions for the standard in advance, providing methods to introduce and systematically manage OID, developing a hardware standard proper for the information exchange standard, and setting up an integrated management system to introduce a dual protocol.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.83-92
• /
• 2012

In anteroposterior projection for cervical vertebra, it is general that the incidence angle of X-ray is $15^{\circ}$ to $20^{\circ}$ degrees to head in order to prevent overlap of mandible and occipital bone and to observe array of cervical interbody and shapes of joints. However, the angle is appropriate for foreigners that was determined by foreign literature review long ago, and there have been few researches of incidence angle for Koreans' body type. The purpose of in this study are to identify the incidence angle appropriate for Koreans and to present methodology. In order to measure the incidence angle, 1,044 patients who visited S Hospital located in Seosan were selected and measured of average length of cervical vertebra, OID, axis angle, and FID. The incidence angle was calculated from the applied formula by measuring average values per age groups and sex (see Formula 1 and 2). The average length of cervical vertebra was 6cm: the length was increased from teenagers to twenties but was decreased since thirties. The difference between males and females was around 1cm (p<.01). The OID was almost the same regardless of age groups and sex. As for axis angle, the slope was increased in teenagers and twenties, but was decreased since thirties. The difference between males and females was around 2 degrees (p<.01). The FID measurements were almost the same regardless of age groups and sex, and when the incidence angle was measured from these values, the teenagers were $15.9^{\circ}$, the twenties were $16.9^{\circ}$, the thirties were $16.6^{\circ}$, the forties were $16.2^{\circ}$, the fifties were $15.9^{\circ}$, and the sixties were $14.5^{\circ}$, indicating that the angle was increased from teenagers to the twenties but decreased since the thirties. While the angles of males and females were measured to be the same in the teenagers, the angle was different between males and females by $2^{\circ}$. When the incidence angle statistically analyzed with measurement of average length of cervical vertebra, OID, axis angle, and FID, all of them were shown to have correlations with the incidence angle (p<.01). Conclusively, it was shown that the incidence angle was measured differently from average length of cervical vertebra, OID, FID, and axis slope, as well as from age and sex. Therefore, it can be suggested that the anteroposterior radiation test for cervical vertebra should be conducted by different incidence angles based on age and sex. The data of this study may be used as reference in determining the incidence angle of cervical vertebra tests for the future.

• Journal of Korea Game Society
• /
• v.18 no.4
• /
• pp.33-42
• /
• 2018

Virtual reality can user experience the virtual world of computer and stimulate user eyesight and emotions. HMD can acquire and stimulate user behavior and sensory information. In this paper, we propose a virtual reality game using robot control. Controlling the robots using various interfaces and synchronizing them with the virtual reality game. In this paper, we use OID mat for robot movement detection based optical code recognition and Kalman filter.

• The Magazine of Kiice
• /
• v.16 no.2
• /
• pp.52-56
• /
• 2015

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.219-221
• /
• 2000

본 논문은 객체 관계형 실시간 DBMS인 Tachyon이 제공하는 데이터 타입과 객체지향 질의의 설계 및 구현을 기술한다. Tachyon은 고성능 데이터 처리를 지원하는 객체 관계형 메모리상주 데이터베이스 시스템(Main-memory resident ORDBMS)로 Tachyon의 데이터 타입과 SQL은 ANSI SQL 3 draft를 기반으로 설계되었으며, 객체 관계형 질의 처리를 위한 OID 데이터 타입을 추가하였다. Tachyon은 클래스 간의 수직적 관계(상속)와 수평적 관계를 정의하고 조작할 수 있는 객체지향 질의를 통하여 융통성있는 데이터 조작이 가능하며, OID를 기반으로 경로식(path expression)을 이용한 향해 질의(navigational query)를 통하여 죠인(join) 비용을 절감하고, index를 통한 인스턴스 접근 등을 통하여 효율적인 데이터베이스 접근을 시도할 수 있다.