• 한국운동역학회지
• /
• 제30권1호
• /
• pp.63-72
• /
• 2020

Objective: The purpose of this study was to investigate meta-analysis on the effects of exercise therapy and physiotherapy on pain in korean patients with chronic low back pain. Method: Meta-analysis was performed on the type and method of treatment. A total of 23 experimental studies were coding into 31 individual studies, into types, methods, visual analogue scale (VAS), each pre/post value of the effect size was calculated by meta-analysis. Results: Sling exercise, stretching, thermal therapy, kinesio-taping, lumbar stabilization exercise, electrotherapy is large effect size (ES ≥ .08). In addition, big effects occurred in order of treatment period is more than 9 weeks, three times a week. Conclusion: Our results indicated that persistent treatment of chronic back pain is the most effective method of self-sufficiency rather than temporary relief.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.51-58
• /
• 1998

Structural changes of cellulosic fibres during the papermaking process were studied by analysis of FTIR spectra collected by the transmission method. The spectra were obtained from a carefully prepared handsheet, using a special infra-red (IR) cell suitable for evacuating the sample. The deconvolution technique was also applied for sharpening the FTIR spectra in the frequency range of the OH and CH stretching bands, which gave detailed information on the structural changes of cellulose. The intensity of some bands was decreased by predrying the sample as a result of the removal of adsorbed moisture. An increase in intensity of some bands in the frequency range of 3700 to $3200cm^{-1}$ was shown at a higher beating level. This increase in intensity was caused by changes in the crystal domain of cellulose resulting from the exposure of the crystalline area on the fibre surface.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.49-56
• /
• 2002

A two-dimensional direct numerical simulation is performed to investigate the formation characteristics of a single vortex interacting with $CH_4/N_2$-Air counterflow nonpremixed flame. The numerical method was based on a predictor-corrector scheme for a low Mach number flow. The detailed transport properties and a 16-step augmented reduced mechanism are adopted in this calculation. The budgets of the vorticity transport equation arc examined to reveal the mechanisms leading to the formation, evolution and dissipation of a single vortex interacting with counterflow nonpremixed flame. It is found that the stretching term, which depends on the azimuthal component of vorticity, and radial velocity, mainly generates vortieitv in non-reacting and reacting flows. The viscous and baroclinic torque term destroy the vorticity in non-reacting flow. In addition, the baroclinic torque term due to density and pressure gradient generates vorticity, while viscous and the volumetric expansion terms due to density gradient destroy vorticity in reacting flow.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.149-156
• /
• 2017

Recently, stretchable and transparent electrodes have received great attention owing to their potential for realizing wearable electronics. Unlike the traditional transparent electrodes represented by indium tin oxide (ITO), stretchable and transparent electrodes are able to maintain their electrical and mechanical properties even under stretching stress. Lots of research efforts have been dedicated to the development of stretchable and transparent electrodes since they represent the most important engineering platform for the production of wearable electronics. Various approaches using silver nanowires, nanostructured networks, conductive polymers, and carbon-based electrodes have been explored by many world leading research groups. In this review, present and recent advances in the fabrication methods of stretchable and transparent electrodes are discussed.

• Bulletin of the Korean Chemical Society
• /
• 제11권5호
• /
• pp.396-399
• /
• 1990

Fourier transform infrared spectroscopy has been applied to the characterization of titania surface. The bands due to surface OH groups were observed to be more intense in the reduced titania than in the oxidized titania. The IR spectra of CO adsorbed on titania exhibited two C-O stretching bands, namely at 2187 and 2209 cm$^{-1}$. The intensities were stronger in the oxidized titania.The 2187 cm$^{-1}$-peak was attributed to CO coordinated to $Ti^{4+}_{5c}$ (subscriptindicates the coordination number of the coordinatively unsaturated cation by oxygen ions), while the 2209 cm-1-peak due to the $Ti^{4+}_{4c}{\cdots}$CO complex.

• Bulletin of the Korean Chemical Society
• /
• 제19권3호
• /
• pp.328-332
• /
• 1998

Anionic ring-opening polymerization of 3,4-[(dimethylsilyl)isopropyl]benzo-1,1-dimethyl-1-silacyclopentene in the presence of n-butyllithium and HMPA in THF at - 78 ℃ afforded poly[3,4-(dimethylsilylisopropyl)benzo-1,1-dimethyl-1-silapentene]. The characteristic Si-H stretching frequency in the IR is observed at 2100 cm-1. The polycarbosilane has been modified by chloroplatinic acid catalyzed addition of styrene to the polycarbosilane SiH units. Molecular weights and thermal properties of the polymers were compared. The sol-gel polymerization of 3,4-[(dimethoxysilyl)isopropyl]benzo-1,1-dimethoxy-1-silacyclopentene in the presence of aqueous HCl or NaOH in THF resulted in a cross-linked polysiloxane. The xerogel has a low surface area of 13-14 m2/g and is stable up to about 400 ℃ with only 5% weight loss under a nitrogen atmosphere.

• 한국지구과학회지
• /
• 제27권3호
• /
• pp.313-327
• /
• 2006

담양 지역의 음용 지하수 중에 형성된 망간 스케일의 지구화학적 특성을 규명하고자 하였다. 망간 스케일은 MnO 및 $SiO_2$로 구성되어 있고, MnO의 함량은 56.61wt.%에서 68.69wt.%, 그리고 $SiO_2$ 함량은 1.56wt.%에서10.45wt.%로 나타난다. 망간 스케일 중의 Ba와 Mo 함량은 지하수 심도가 증가할수록 증가하여 나타나고 Zn과 Pb는심도가 증가할수록 감소한다. 망간 스케일을 x-선 회절 분석을 한 결과 birnessite, 석영 및 장석이 분석되었다. IR 분석에서 망간 스케일은 OH, $H_2O$ 그리고 birnessite에 의한 흡수 밴드가 관찰된다. SEM 및 EDS 분석에서 망간 스케일은 포도송이 구조, 과립 구조, 구상 구조 및 속이 빈 straw 구조로 되어 있는 것이 관찰된다. 이들 구조들은 고농도의 망간함량에 의해 단순히 과포화로 침전되었을 것으로 생각되며, 혹은 Lepthothrix discophora에 의해 미생물적으로 침전되었을 것으로 생각된다. 이들 구조들의 표면을 EDS로 분석한 결과 Mn의 원자(atomic) 퍼센트가 28에서 44범위로 나타나고 Si, K, Na, Ca, Cl, Cu, Zn 및 Ba 등이 검출된다.

• 한국의류학회지
• /
• 제35권8호
• /
• pp.982-990
• /
• 2011

Kenaf fiber can be obtained by decortications of the kenaf plant stem. The properties of the kenaf fiber treated by alkali (NaOH) were investigated by spectrocolorimeter, SEM, X-ray diffractometer, FT-IR and TGA. The kenaf fibers treated by alkali became darker and their Munsell color values changed from Y (yellow) to YR (yellowred) according to an increased NaOH concentration. SEM observation of the kenaf fibers showed that their crimps were developed and their surfaces were cleaned by the removal of protruding ends and impurities after alkali treatments. In the x-ray diffraction analysis, the structures of the fibers were found in the form of cellulose I when treated with a 0-16% alkali concentration and cellulose II when treated with over 20%. It was also confirmed that the crystallinity was lowered according to an increased NaOH concentration. The change of fiber compositions was investigated in FT-IR analysis. Strong band of $1,738cm^{-1}$ and asymmetrical stretching strong bands of $1,630-1,600cm^{-1}$ in spectrum (which represent pectin) were not found in the samples because the pectin was removed by the alkali treatment. Weak bands of $1,728-1,730cm^{-1}$ and peaks of $1,245-1,259cm^{-1}$ (which represent hemicellulose) and peaks of $1,592cm^{-1}$, $1,504cm^{-1}$, $1,462cm^{-1}$ and $1,429cm^{-1}$ (which are related to lignin) were not found or reduced in the samples treated with a concentration over 20%. TGA indicated that the kenaf fiber had the better hydrophilic properties by alkali treatment. The higher Tmax in TGA and the higher thermal stability when treated by alkali with the higher concentration. The fibers treated with an alkali concentration over 30% did not show any changes in Tmax.

• 한국환경농학회지
• /
• 제5권1호
• /
• pp.1-10
• /
• 1986

제지(製紙)슬러지가 논 토양(土壤)의 화학성(化學性)에 미치는 영향(影響)을 검토(檢討)코자 슬러지를 600 ㎏/10a시용(施用)하여 pot시험(試驗)을 실시(實施)함으로써 토양중(土壤中) 유기물(有機物) 및 부식(腐植)의 형태변화(形態變化)와 부식산(腐植酸)의 자외부(紫外部) 및 가시부령역(可視部領域)에서의 흡수(吸收) spectra, infrared spectra 및 작용기함량(作用基含量)을 경시적(經時的)으로 조사(調査)한 결과(結果)는 다음과 같다. 1) 토양중(土壤中) ether 가용물질(可溶物質), resins, 수용성(水溶性) polysaccharides, hemicellulose, cellulose, ligno-protein, 부식산(腐植酸) 및 폴보산의 함량(含量)은 3요소구(要素區)에 비(比)하여 슬러지구(區)가 높았다. 2) 부식산(腐植酸)의 자외부(紫外部) 및 가시부령역(可視部領域)에서의 흡수(吸收) spectra는 모든 처리구(處理區)가 극대(極大)나 극소(極少)가 없는 일정(一定)한 흡수곡선(吸收曲線)을 나타내면서 파장(波長)이 길어질수록 optical density는 감소(減少)하는 경향(傾向)이었다. 부식산(腐植酸)의 작용기중(作用基中) phenolic-OH/alcoholic-OH는 슬러지구(區)가 3요소구(要素區)에 비(比)하여 약간 증가(增加)하는 경향(傾向)이었다. 부식산(腐植酸)의 형태(形態)는 모든 처리구(處理區)가 주로 P형(型) 및 Rp형(型)이었다. 3) 부식산(腐植酸)의 infrared spectra의 공통적(共通的)인 주요(主要) 흡수(吸收) band는 $3,400cm^{-1}$, $2,900cm^{-1}$, $1,600cm^{-1}$ 및 $1,050cm^{-1}$부근(附近)이었으며 $3,400cm^{-1}$부근(附近)의 넓은 흡수(吸收) band는 hydrogen-bonded OH에 기인(基因)되었고 $2,900cm^{-1}$부근(附近)의 흡수(吸收)는 aliphatic C-H stretching에 의한 것이었으며 $1,630cm^{-1}$부근(附近)의 흡수(吸收)는 aromatic C=C외에 hydrogen-bonded C=O로 추측(推測)되었으며 $1,050cm^{-1}$부근(附近)의 강(强)한 흡수(吸收) band는 규산(珪酸) 부순물(不純物)의 Si-O결합(結合)에 기인(基因)된 것으로 해석(解釋)되었다.

• 소성∙가공
• /
• 제16권7호
• /
• pp.555-560
• /
• 2007

This paper shows some achievements at bending of extruded aluminum profiles during the extrusion process. The conventional process for the production of bent profiles involves a successive extrusion, stretching, and bending of the profiles. Conventional bending methods can not meet demands far precision and cost-effective production in some cases, due to cross sectional deformation, irregular decrease of tube wall thickness and a complication of the process design. An estimation of spring-back required for precision of the bending radius can not always be achieved by the over bending of the profile. Since the profile is hot during the bending process, the spring-back phenomenon can be avoided. This means that an additional bending process is not necessary. Consequently, flexible bending can be achieved with cost reduction and quality improvement. Experimental tests were completed to study the relationship between curvature radius of profile and position of guide on the extrusion for vehicle bumper. A7108 is applied as a billet material in order to increase strength. The overall correlation between the experimental and numerical results is good. It is therefore concluded that the present method provides an efficient means for the constant curvature extrusion process.