• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.222-228
• /
• 2006

In this paper, we propose a receive diversity method for orthogonal frequency division multiplexing (OFDM) systems with cochannel interference. In the method, combining is done in the frequency domain by using the subcarrier based maximum ratio combining (MRC) method. For MRC, we exploit the power of cochannel interference as well as the power of channel noise. The accuracy of the power estimate of interference plus noise is enhanced by averaging the initial estimates over the correlated subchannels where the coherency between the subchannel gains comes from the limited delay spread of the channel. Simulation results show that the proposed method yields 2-3.5dB gain of signal to noise ratio compared to the conventional MRC method and less than 1 dB difference to the ideal case.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.87-90
• /
• 2006

In this letter, we propose a quasi-orthogonal space-time-frequency (QOSTF) block coded orthogonal frequency division multiplexing (OFDM) that can achieve full symbol rate with four transmit antennas. Since the proposed QOSTF-OFDM cannot achieve full diversity, we use a diversity advantage collection with zero forcing (DAC-ZF) decoder to compensate the diversity loss at the receiving side. Due to modulation advantage and collected diversity advantage, the proposed scheme exhibits a better bit-error rate performance than other orthogonal schemes.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.42-46
• /
• 2009

Superimposed training (SIT) design for estimating of time-varying multipath channels is investigated for mobile orthogonal frequency division multiplexing (OFDM) systems. The design of optimum SIT consists of two parts: The optimal SIT sequence is derived by minimizing the channel estimates' mean square error (MSE); the optimal power allocation between training and information data is developed by maximizing the averaged signal to interference plus noise ratio (SINR) under the condition of equal powered paths. The theoretical analysis is verified by simulations. For the metric of the averaged SINR against signal to noise ratio (SNR), the theoretical result matches the simulation result perfectly. In contrast to an interpolated frequency-multiplexing training (FMT) scheme or an SIT scheme with random pilot sequence, the SIT scheme with proposed optimal sequence achieves higher SINR. The analytical solution of the optimal power allocation is demonstrated by the simulation as well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.13-19
• /
• 2008

In this paper, the new cooperative communication techniques is proposed for multi-input multi-output(MIMO)-orthogonal frequency division multiplexing (OFDM) system using the relay with multiple antenna. As the MIMO channel is formed by space time coding at the MS(mobile station)-RS(relay station) and RS-BS(base station), we can get the cooperative diversity and MIMO diversity gain simultaneously. Therefore, the performance of MIMO-OFDM system using the relay with multiple-antennas is very improved. And the simple power allocation technique is Proposed for the transmitting power of the mobile station and the relay.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.117-123
• /
• 2017

N-continuous orthogonal frequency division multiplexing (OFDM) is a precoding method for sidelobe suppression of OFDM signals and seamlessly connects OFDM symbols up to the high-order derivative for sidelobe suppression, which is suitable for suppressing out-of-band radiation. However, it severely degrades the error rate as it increases the continuous derivative order. Two schemes for orthogonal precoding of N-continuous OFDM have been proposed to achieve an ideal error rate while maintaining sidelobe suppression performance; however, the large size of the precoder matrices in both schemes causes very high computational complexity for precoding and decoding. This paper proposes matrix decomposition of precoder matrices with a large size in the orthogonal precoding schemes in order to reduce computational complexity. Numerical experiments show that the proposed method can drastically reduce computational complexity without any performance degradation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.411-417
• /
• 2014

In this paper, we propose an efficient OFDM(Orthogonal Frequency Division Multiplexing) frame synchronization scheme for LED-ID(Identification) systems. A frame synchronization is an essential procedure for normal operations of OFDM systems. Bernoulli-Gaussian noise is considered in LED-ID systems' environments. In order to enhance the OFDM frame synchronization performance, we add a ROGS(Repeated Orthogonal Gold Sequence) to OFDM signals in the time domain. The power level of a ROGS does not affect a normal operation of the LED-ID systems. Frame synchronization can be achieved successfully over LED-ID channels interfered by impulsive noise owing to good auto and cross-correlation properties of the ROGS.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.71-78
• /
• 2008

We propose a sub-band spreading technique for adaptive modulation (AM) in orthogonal frequency division multiplexing (OFDM) systems in order to reduce signaling overheads and to average frequency selective fading channels causing different signal-to-noise ratio (SNR) values for subcarriers in each subband. The conventional sub-band based AM schemes can also reduce signaling overheads and complexity for allocating a resource per sub-band at a time. However, they may suffer from the channel variation in a sub-band when the sub-band size is larger than the channel coherence bandwidth (BW). The sub-band spreading at the transmitter enables the received symbols in each sub-band to have an identical reliability even in a frequency selective fading channel. We rigorously analyze the averaged SNR value at the receiver of the sub-band spreading system and the analyzed average SNR in a sub-band is used for an adaptation criterion. The proposed AM scheme outperforms the conventional sub-band based OFDM scheme without spreading, and it can yield better throughput performance than the conventional subcarrier based AM schemes when we consider the signaling overheads.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.245-254
• /
• 2017

In-band full-duplex (IFD) communication has recently attracted a great deal of interest because it potentially provides a two-fold spectral efficiency increase over half-duplex communications. In this paper, we propose a novel digital self-interference cancelation (DSIC) algorithm for an IFD communication system in which two nodes exchange orthogonal frequency-division multiplexing (OFDM) symbols. The proposed DSIC algorithm is based on the least-squares estimation of a self-interference (SI) channel with block processing of multiple OFDM symbols, in order to eliminate the fundamental and harmonic components of SI induced through the practical radio frequency devices of an IFD transceiver. In addition, the proposed DSIC algorithm adopts discrete Fourier transform processing of the estimated SI channel to further enhance its cancelation performance. We provide a minimum number of training symbols to estimate the SI channel effectively. The evaluation results show that our proposed DSIC algorithm outperforms a conventional algorithm.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.248-257
• /
• 2005

In this paper, we develop design procedures for carrier tracking loop for orthogonal frequency division multiplexing (OFDM) systems or other systems of blocked data. In such communication systems, phase error measurements are made infrequent enough to invalidate the traditional loop design methodology which is based on analog loop design. We analyze the degradation in the OFDM schemes caused by the tracking loop and show how the performance is dependent on the rms phase error, where we distinguished between the effect of the variance in the average phase over the symbol and the effect of the phase change over the symbol. We derive the optimal tracking loop including optional delay in the loop caused by processing time. Our solution is general and includes arbitrary phase noise apd additive noise spectrums. In order to guarantee a well behaved solution, we have to check the design against margin constraints subject to uncertainties. In case the optimal loop does not meet the required margin constraints subjected to uncertainties, it is shown how to apply a method taken from control theory to find a controller. Alternatively, if we restrict the solution to first or second order loops, we give a simple loop design procedure which may be sufficient in many cases. Extensions of the method are shown for using both pilot symbols and data symbols in the OFDM receiver for phase tracking. We compare our results to other methods commonly used in OFDM receivers and we show that a large improvement can be gained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.70-75
• /
• 2005

The efficient hardware design of the the algorithm is important in wide variety of DSP. One example is OFDM(Orthogonal Frequency Division Multiplexing) based WLAN(Wireless Local Area Network) systems which place high requirements on throughput and power consumption on FFT. The output RAM is composed of two banks of $64{\times}W.$ The banks are swapped immediately following the falling edge or the start signal strobe. This bank swapping allows 64-Point FFT to continue Processing samples and to continue filling the alternative bank, without affecting the data flow outputs.