• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.205-211
• /
• 2011

The papaer reviews four theoretical acceptance sampling plans as OC(Operating Characteristics) curve based inspection, rectifying inspection, switching inspection, and continuous inspection. In addition, the study presents practical limitations of theoretical acceptance sampling by attribute and by variable. Finally, following research also recommends the sampling inspection based on production technology. However, the inspection method requires quality expertise with various experience and implicit knowledge of the field.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.443-450
• /
• 2008

This paper is to present design principle and operation strategy of acceptance control chart by the use of OC-Based sampling inspection for continuous data. The unified control limits for acceptance control chart when considering both APL(Acceptable Process Level) and RPL(Rejectable Process Level) are proposed. The control limits can be also extended to the acceptance control chart with unknown process standard deviation.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.231-238
• /
• 2016

Traditional acceptance sampling plans have focused on the proportion of nonconforming items as an attribute criterion for quality. In today's modern quality management under high quality production environments, the reduction of the deviation from a target value in a quality characteristic has become the most important purpose. In consequence, various inspection plans for the purpose of reducing the deviation from the target value in the quality characteristic have been investigated. In this case, a concept of the quality loss evaluated by the deviation from the target value has been accepted as the variable evaluation criterion of quality. Further, some quality measures based on the quality loss have been devised; e.g. the process loss and the process capability index. Then, as one of inspection plans based on the quality loss, the rigorous design procedure for the variable sampling plan having desired operating characteristics (VS-OC plan) indexed by the quality loss has been proposed by Yen and Chang in 2009. By the way, since the estimator of the quality loss obeys the non-central chi-square distribution, the rigorous design procedure for the VS-OC plan indexed by the quality loss is complicated. In particular, the rigorous design procedure for the VS-OC plan requires a large number of the repetitive and complicated numerical calculation about the non-central chi-square distribution. On the other hand, an approximate design procedure for the VS-OC plan has been proposed before the proposal of the above rigorous design procedure. The approximate design procedure for the VS-OC plan has been constructed by combining Patnaik approximation relating the non-central chi-square distribution to the central chi-square distribution and Wilson-Hilferty approximation relating the central chi-square distribution to the standard normal distribution. Then, the approximate design procedure has been devised as a convenient procedure without complicated and repetitive numerical calculations. In this study, through some comparisons between the rigorous and approximate design procedures, the applicability of the approximate design procedure has been confirmed.

• Journal of Korean Society for Quality Management
• /
• v.13 no.2
• /
• pp.48-55
• /
• 1985

This paper intends to decide the optimum OC curves and to find the minimized ${\alpha}$, ${\beta}$-risk based upon the Linear Cost Model (L.C.M.) for the destructive or nondestructive acceptance sampling inspection plan. For the solution from the L.C.M., we assume the uniform distribution as a Prior-distribution and use numerical analysis by computer.

• Industrial Engineering and Management Systems
• /
• v.9 no.1
• /
• pp.54-59
• /
• 2010

A two-plan sampling system is proposed for a failure-censored life testing when the lifetime follows a Weibull distribution with known shape parameter. The proposed sampling system is based on a switching rule, for switching between the tightened and the normal inspection levels when lots are submitted for inspection in the order of production or in some other systematic way. The design parameters of the proposed sampling system are determined by the two-point approach considering the producer's risks and the consumer's at the specified acceptable reliability level and the lot tolerance reliability level, respectively. It has been observed that the proposed system requires only a single failure for the observation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.16 no.1
• /
• pp.1-15
• /
• 1990

An AQL type variables sampling system with switching rules is proposed. Comparative studies of existing variables sampling standards - MIL-STD-414, ANSI Z1.9, ISO 3951, and BS 6002 - are made, and simulation studies on switching procedures are conducted. Based on comparative and simulation studies, a variables sampling standard for Korean industry is proposed. The master sampling tables of the proposed standard are taken from the variables standard ANSI Z 1. 9 and the switching rules are matched to the attributes standard KS A 3109 to enable us to move between the proposed variables standard and KS A 3109. Composite OC and ASN curves of the proposed standard are calculated for selected combinations of lot sizes and AQL's and they are compared with those of ANSI Z1.9.

• Journal of Korean Society for Quality Management
• /
• v.7 no.1
• /
• pp.26-34
• /
• 1979

This paper intends to decide the optimum OC curves and to find the minimized ${\alpha},{\beta}$-risk based upon the Linear Cost Model (L. C. M.) for the destructive or nondestructive acceptance sampling inspection plan. For the solution from the L. C. M., the author used the prior-distribution on some assumptions.