• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.449-456
• /
• 2005

Optical burst switching (OBS) overcomes the inefficient resource usage of optical circuit switching and minimizes the optical buffering requirement of optical packet switching. General switch management protocol (GSMP) is an open interface between a label switch and a controller, and it provides connection, configuration, performance, event management and synchronization. GSMP open interface in the OBS network allows the implementation of OBS switch to be simple by separating the data forward plane from the control plane. We defined managed objects to support connection, configuration, performance, and fault management for the management of OBS network in the GSMP open interface. We proposed the network management model, in which the above managed objects are distributed in a controller and an OBS switch according to network management functions. We verified the possibility of connection management using distributed network management model in the GSMP open interface of OBS network by implementing GSMP and network management functions with managed objects of OBS.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2008

Ocean-bottom seismometer (OBS) positions are one of the key parameters in an OBS-airgun seismic survey for crustal structure study. To improve the quality of these parameters, we have developed a new method of determining OBS positions, using airgun shot data and bathymetric data in addition to available distance measurements by acoustic transponders. The traveltimes of direct water waves emitted by airgun shots and recorded by OBSs are used as important information for determining OBS locations, in cases where there are few acoustic transponder data (<3 sites). The new method consists of two steps. A global search is performed as the first step, to find nodes of the bathymetric grid that are the closest to explaining the observed direct water-wave traveltimes from airgun shots, and acoustic ranging using a transponder system. The use of precise 2D bathymetric data is most important if the bottom topography near the OBS is extremely rough. The locations of the nodes obtained by the first step are used as initial values for the second step, to avoid falling into local convergence minima. In the second step, a non-linear inverse method is executed. If the OBS internal clock shows large drift, a secondary correction for the OBS internal clock is obtained, as well as the OBS location, as final results by this method. We discuss the error and the influence of each measurement used in the determination of OBS location.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.141-149
• /
• 1999

The correlation was investigated between the observed heat of ligation and calculated quantum chemical quantities for octahedral $[M(H_2O)_{6-x}(NH_3)_x]^{2+} (M=Fe(II),\;Ni(II))$ complexes by EHMO(Extended Huckel Molecular Orbital) and ZINDO/1(Zerner's Intermediate Neglected of Differential Overlap)method. The net charge of $Fe^{2+}$ and $Ni^{2+}$ ion of octahedral $[M(H_2O)_{6-x}(NH_3)_x]^{2+}(M=Fe(II),\;Ni(II))$ complexes(x=O, 1, …, 6) decreased with substituting $NH_3$ for $H_2O$ molecules. It has found that a good correlation exists between the observed heat of ligation and the calculated quantum chemical quantities such as net charge of central atom, enthalpy of formation, and total dissociation energy. From this finding, we have obtained the following semiempirical linear equation ${\Delta}H_{obs}=-0.2858_{qFe}+0.8813(r=0.97),\;{\Delta}H_{obs}=-0.8981_{qNi}+1.7929(r=0.95),\;{\Delta}H_{obs}=-0.0031H_{f(Fe)}+0.5725(r=0.97),\;{\Delta}H_{obs}=-0.0095H_{f(Ni)}+0.9193(r=0.97),\;{\Delta}H_{obs}=0.0476E_{diss(Fe)}+0.6434(r=0.94),\;{\Delta}H_{obs}=0.1401E_{diss(Ni)}+1.1393(r=0.93)$.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.3
• /
• pp.57-64
• /
• 2020

Construction management performs a variety of tasks, and the buildup of the WBS and OBS is one of the core tasks. However, the practical utilization of WBS and OBS is low in the current construction management work. In this study, we conducted a survey of related experts to analyze the understanding, utilization level, application effect, and connectivity of WBS and OBS. As a result, it was identify that the standardization and linkage of WBS and OBS should be secured so that the construction manager (CMr) could apply it. Therefore, we extracted management control factors through expert in-depth interviews and workshops and conducted AHP importance analysis. Analysis results of importance shows that there is a high importance of strengthening the link between WBS and OBS and updating OBS due to changes in WBS. The results presented are not direct solutions, but are expected to provide a standard for construction managers to consider.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.151-156
• /
• 2007

In December 2006, 2D surface streamer and Ocean Bottom Seismometer (OBS) data were acquired in the Ulleung basin in Korea where strong Bottom Simulating Reflectors (BSR) were shown as a result of 2D and 3D multichannel (MCS) reflection survey. The aim of this study is to provide another reliable source for estimating P wave velocity around BSR depth using OBS data in addition to velocity information from 2D surface seismic data. Four OBSs were deployed and four 20-km shot lines which pass two OBSs respectively were designed. To derive P wave velocity profile, interactive interval velocity analysis using ${\tau}$-p trajectory matching method (Kumar, 2005) was used for OBS data and semblance analysis was used for surface data. The seismic profiles cross the OBS instruments in two different directions yield recordings for four different azimuths. This raised the confidence for the results. All velocity profiles in the vicinity of BSR depth of four OBS sites show almost definite velocity changes which we could consider as upper BSR and free gas layer. Making comparison between velocity from OBS and that from 2D seismic semblance velocity analysis gives consistency in result.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.88-96
• /
• 2013

Recent proliferation of building information modeling (BIM) has actively stimulated integrated utilization of geometric (graphic) and non-geometric (non-graphic) data. Nevertheless, physically and logically, linking and maintaining these two different types of data in an integrated manner requires enormous overhead efforts for practical implementation. In order to address this problem, this paper proposes a concept and structure of the object breakdown structure (OBS) that facilitates advanced BIM implementations in an automated and effective manner. Proposed OBS numbering system has secure rules for organizing graphic objects in full considerations of effectively integrating with non-geometric data (e.g. cost and schedule). It also removes repetitive linking process caused by design changes or modifications. The result of applying this concept to a housing project revealed that only 120 definitions controled over 6,000 graphic objects for full integration with cost and schedule functions.

• Journal of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.281-288
• /
• 1978

Pseudo-first order rate constants $k_{obs}$ were determined for the reactions of naphthalenesulfonyl chlorides (1-NSC and 2-NSC) and anilines. The second order rate constant $k_2$ and third order catalytic $k_3$ were then determined from $k_{obs}$. For 1-NSC peri-hydrogen effect was observed. The large Brønsted ${\beta}$ and large negative slopes ${\rho}$ for the Hammett plots were obtained. These results with the unsually low values of activation parameters were consistent with the $S_AN$-elimination mechanism, but these can be equally well interpreted with the associative $S_N2$mechanism.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.209-214
• /
• 2011

Although the function and utility of RNA transcripts derived from matured spermatozoa remains unclear, they might play important roles in the establishment of a paternal genome and subsequently embryo development. Herein, we investigated the expression of X-chromosome linked RNA transcripts in matured bovine spermatozoa. The total RNA was extracted from the matured spermatozoa, and then converted to cDNA. Autosomal genes (ACT-${\beta}$ and H-2A) and X-chromosome linked genes (ANT3, HPRT, MeCP2, RPS4X, XIAP, XIST and ZFX) were analyzed for the characterization of X-chromosome linked RNA transcripts and compared to female fibroblasts by RT-PCR. The transcripts of autosomal genes (ACT-${\beta}$ and H2A) and X-chromosome linked genes (ANT3, HPRT, MeCP2, RPS4X and ZFX) were not detected in spermatozoa. However, XIAP (X-linked inhibitor of apoptosis protein) and XIST (X-chromosome inactive-specific transcript, a kind of paternal imprinted gene) transcripts were detected in spermatozoa, and relative levels of XIAP and XIST transcripts were similar and 0.5-fold lower when compared to female fibroblasts, respectively. Based on the findings, it is summarized that the presence of RNA transcripts of XIAP and XIST in the isolated spermatozoa may imply their role in inhibition of apoptosis and induction of X-chromosome inactivation in embryo development.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.35-41
• /
• 1998

This study was carried out to investigate the development rates of human embryos co-cultured with cumulus cells to each blastocyst stage. Human zygotes were co-cultured on cumulus cell monolayer in YS medium supplemented with 20% hFF. On day 2, if patient had four or more "good" embryos (regular blastomeres without fragmentation), embryos were further cultured for 72hrs. Blastocysts on day 5 were classified into early blastocyst (ErB), early expanding blastocyst (EEB), middle expanding Blastocyst (MEB), and expanded blastocyst (EdB) on the basis of their morphological aspects of trophectoderm cells and blastocoele. Subsequently, maximum 3 of best blastocysts were transferred in 486 cycles. The results in this study were as follows: Patients who had four or more "good" embryos on day 2 were 498 persons, but patients whose embryos could not be transferred due to failure in development to the blastocyst stage on day 5 were 12 persons (2.4%). The development rate of embryos to the blastocyst stage was 58.2% (2,885/4,957) on day 5, and the rates that developed to the ErB, EEB, MEB, and EdB stage were 15.0% (743/4,957), 14.9% (739/4,957), 14.4% (714/ 4,957), and 13.9% (689/4,957), respectively. Total 1366 blastocysts were transferred in 486 cycles (mean number=2.81). The implantation rate and the ongoing implantation rate obtained by observing the number of G-sac and FHB were 29.9% (409/1,366) and 22.5% (308/1,366), respectively. The clinical pregnancy rate was 51.2% (249/486), and the ongoing pregnancy rate' was 39.1% (190/486). Among women showing ongoing pregnancy, women with singleton were 50% (95/190), women with twin were 37.9% (72/190), and women with triplet were 12.1% (23/190). Although triplet pregnancy rate in this study was high such as 12.1%, because many blastocysts with high viability were produced in our co-culture system using cumulus cells on day 5, we really believe that a multiple pregnancy except twin should not occur by selecting good embryos for maximum two blastocyst transfer. These results demonstrate that autologous cumulus cells may be used for the production of blastocysts with high developmental competence, and the use of autologous cumulus cells to be collected easily, and to be treated conveniently at OPU must be an effective means for obtaining high implantation and pregnancy rate.

• Atmosphere
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2009

We need water equivalent unit data of snowfall for the purpose of forecast and hydrology related research area. This study developed new method of automatic recording snowfall as weight unit with circle type plate using stain-gauge loadcell. Field test of instrument carried out at Daegwallyeong Obs. Station from 20 to 23 Jan. 2008 during heavy snowfall. There is 74.2cm snow depth and 54.6mm precipitation by Daegwallyeong Obs. Station. But the instrument of this study recorded 71.0mm of precipitation amount. Because of different observation method can cause more 15.4mm than Daegwallyeong Obs. Station. But this study gives the possibility of observation of new snow fall measurement under freezing conditions of snow. From the observation data the density of snowfall calculated from 0.09 to $1015g/cm_3$ from the observation period. And have a good relations between manual observation and automatic observation data from this study instrument with slope of 1.35 to 1.39.