• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.54-62
• /
• 1998

20 bacterial strains capable of growing on phenol minimal medium were isolated from soil and wastewater by the enrichment culture technique, and among them, one isolate which was the best in the cell growth was selected and identified as Bacillus sp. SH3 by its characteristics. Strain SH3 could grow with phenol as the sole carbon source up to 15 mM, but did not grow in minimal medium containing above 20 mM of phenol. The optimal conditions of temperature and initial pH for growth and phenol degradation were 30$^{\circ}$C and 7.5, respectively. This strain could grow on various aromatic compounds such as catechol, protocatechuic acid, gentisic acid, o-, m-, p-cresol, benzoic acid, p-hydroxybenzoic acid, anthranilic acid, phenyl acetate and pentachlorophenol, and the growth-limiting log P value of strain SH3 on organic solvents was 3.1. In batch culture, strain SH3 degraded 97% of 10 mM phenol in 48 hours. In continuous culture under the conditions of 20 mM of influent phenol concentration and 0.050 hr$^{-1}$ of dilution rate, the treatment rate of phenol was 94%.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.2
• /
• pp.381-394
• /
• 2012

We generalize the insertion-of-factors-property by setting nilpotent products of elements. In the process we introduce the concept of a nil-IFP ring that is also a generalization of an NI ring. It is shown that if K$\ddot{o}$the's conjecture holds, then every nil-IFP ring is NI. The class of minimal noncommutative nil-IFP rings is completely determined, up to isomorphism, where the minimal means having smallest cardinality.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.27-32
• /
• 2009

A technical system generally comprise a number of subsystems and components that are interconnected in such a way that the system is able to perform a set of required function. Because of the complex system structure with serial, parallel and bridged connections, some certain subsystems or components are more critical than the others. The main concern of a reliability engineer is to identify potential failures and to prevent these failures from occurring. In order to prevent fatal failures, proper inspections and maintenance actions for each component are required Considering above objectives of reliability engineers and characteristics of a practical system, several practical method for evaluating system and component reliabilities have developed namely Birnbaum's and Fussell & Vesely's measures. However there are several critical weaknesses in traditional calculation process as the target system gets larger. In this paper, a new technique for calculating component's structural importance is proposed and compared to Birnbaum's with representative system examples (serial, parallel. k out of n, and bridge type).

• Bulletin of the Korean Mathematical Society
• /
• v.34 no.2
• /
• pp.155-171
• /
• 1997

Let $M^n$ be a connected subminifold of a Euclidean space $E^m$, equipped with the induced metric. Denoty by $\Delta$ the Laplacian operator of $M^n$ and by x the position vector. A well-known T. Takahashi's theorem [13] says that $\delta x = \lambda x$ for some constant $\lambda$ if and only if $M^n$ is either minimal subminifold of $E^m$ or minimal submanifold in a hypersphere of $E^m$. In [9], O. Garay studied the hypersurfaces $M^n$ in $E^{n+1}$ satisfying $\delta x = Dx$, where D is a diagonal matrix, and he classified such hypersurfaces. Garay's condition can be seen as a generalization of T.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.4
• /
• pp.1077-1097
• /
• 2019

Let M be a finitely generated module over a regular local ring (R, n). We will fix an n-stable filtration for M and show that the minimal free resolution of M can be obtained from any filtered free resolution of M by zero and negative consecutive cancellations. This result is analogous to [10, Theorem 3.1] in the more general context of filtered free resolutions. Taking advantage of this generality, we will study resolutions obtained by the mapping cone technique and find a sufficient condition for the minimality of such resolutions. Next, we give another application in the graded setting. We show that for a monomial order ${\sigma}$, Betti numbers of I are obtained from those of $LT_{\sigma}(I)$ by so-called zero ${\sigma}$-consecutive cancellations. This provides a stronger version of the well-known cancellation "cancellation principle" between the resolution of a graded ideal and that of its leading term ideal, in terms of filtrations defined by monomial orders.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.1
• /
• pp.14-19
• /
• 2003

The effect of the Pt electrode and the $Pt-IrO_2$ hybrid electrode on the performance of ferroelectric device was investigated. The modified Pt thin films with non-columnar structure significantly reduced the oxidation of TiN diffusion barrier layer, which rendered it possible to incorporate the simple stacked structure of Pt/TiN/poly-Si plug. When a $Pt-IrO_2$ hybrid electrode is applied, PZT thin film properties are influenced by the thickness and the partial coverage of the electrode layers. The optimized $Pt-IrO_2$ hybrid electrode significantly enhanced the fatigue properties of the PZT thin film with minimal leakage current.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.161-164
• /
• 2002

Polycrystalline and epitaxial heterostructure films of $La_{0.5}Sr_{0.5}CoO_{3}/Pb(Nb_{0.04}Zr_{0.28}Ti_{0.68})O_{3}/La_{0.5}Sr_{0.5}CoO_{3}$ (LSCO/PNZT/LSCO) capacitors were evaluated in terms of low voltage and high speed operation in high density memory, using TiN/Pt conducting barrier combination. Structural studies for a high density ferroelectric memory process flow, which requires the integration of conducting barrier layers to connect the drain of the pass-gate transistor to the bottom electrode of the ferroelectric stack, indicate complete phase purity (i.e. fully perovskite) in both epitaxial and polycrystalline materials. The polycrystalline capacitors show lower remnant polarization and coercive voltages. However, the retention, and high-speed characteristics are similar, indicating minimal influence of crystalline quality on the ferroelectric properties.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.2
• /
• pp.201-207
• /
• 2002

Purpose: To present the clinical analysis of the results obtained in 38 cases of displaced intraarticular calcaneal fractures undergone combined percutaneous axial pin fixation of calcaneal body and minimal internal fixation using extensile lateral approach. Materials and Methods: From March 2000 to February 2002, thirty-eight displaced intraarticular fractures of the calcaneus in 35 patients were fixed with 3.5mm cannulated screws and percutaneous 2.5mm K-wires. The extensile lateral approach was used in all cases. The average follow-up period was 16 months. Clinical evaluation was assessed according to the Ankle-Hind Foot Scale of American Orthopedic Foot and Ankle Society. Results: The clinical results were graded as excellent in 8 cases(21%), good in 22 cases(58%), fair in 6 cases(16%), and poor in 2 cases(5%). Two cases of poor result were type IV of Sanders classification. The postoperative reduction status of the articular surface was analyzed by computed tomography in all cases and was found to be less 2mm of step off in 30 cases and between 2 and 4mm in 8 cases. Unsatisfactory results were correlated with severity of articular comminution and failure to obtain accurate reduction of the articular surface. Using early functional postoperative care, all fractures healed without secondary displacement except 1 case on an average of ten weeks. Two cases had superficial necrosis of the wound margins, however, secondary wound healing was uneventful and skin grafting was not needed. Conclusion: Combined minimal internal fixation and percutaneous pin fixation using extensile lateral approach is useful operative method of intraarticular calcaneal fractures because providing enough stability to permit functional aftercare and allowing excellent anatomical reduction. In addition, this method diminishes the risk of lateral soft tissue problems.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.529-538
• /
• 2003

Chitosan should be satisfied a certain Mw range for the final application, Low molecular weight chitosan(LMWC) can be acquired by depolymerizing high molecular weight starting chitosan. Using $H_2O_2$ in depolymerizing chitosan is very effective and reproducible in controlling Mw of resulting LMWC. However, $H_2O_2$ can break glycoside linkage of chitosan and oxidize some $-NH_2$ groups in chitosan. It has been reported that decrease in DA(degree of deacetylation) of LMWC prepared by $H_2O_2$. However, any quantitative data of decrease in DA has not been reported yet. In this study, DA of initial chitosan and DA of $H_2O_2$ treated chitosan were measured and the change in DA of chitosan upon $H_2O_2$ treatment were investigated. Change in DA was very different upon $H_2O_2$ treatment condition. LMWC also showed DA change upon time passage. Pre-swelling treatment of initial chitosan and low ratio of $H_2O_2$/chitosan prevented a decrease in DA significantly. Yellowing of LMWC was detected upon time passage, however, decrease in DA was minimal (around 1%).

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1457-1461
• /
• 2013

The $Fe_3O_4$-core and Ag-shell ($Fe_3O_4@Ag$ nanoeggs) were prepared through the encapsulation of 3-aminopropyltriethoxysilane-coated magnetite nanoparticle in nano-Ag shell by a simple chemically controlled procedure. The $Fe_3O_4@Ag$ nanoeggs were characterized by scanning electron microscopy, transmission electron microscopy, UV-vis spectrum and superconducting quantum interference device magnetometer, respectively. A detailed analysis is provided of how the hydrolysis and condensation of 3-aminopropyltriethoxysilane and the pH value are vital in fabricating the $Fe_3O_4@Ag$ nanoeggs. The prepared $Fe_3O_4@Ag$ nanoeggs possessed uniform size, improved monodispersity, stability against aggregation and high magnetization, which were utilized for the detection of latent fingerprints deposited onto different surfaces. The experimental results showed that the latent fingerprints developed with the $Fe_3O_4@Ag$ nanoeggs powders exhibited excellent ridge details with minimal background staining.