• Journal of the Korean Society of Clothing and Textiles
• /
• v.6 no.1
• /
• pp.9-15
• /
• 1982

The influence of builders on calcium deposition on the fabric was studied by laundering the cotton fabric with sodium carbonate, sodium metasilicate, sodium tripolyphosphate and built detergents in hard water. The laundry variables were: 1) Washing cycles: 5, 10, 20, 30 and 40 cycles. 2) Water hardness: 100 ppm, 150 ppm, 200 ppm and 300 ppm. 3) Builders: $Na_2\;CO_3,\;Na_2\;SiO_3$ and STPP. 4) Detergents: Na-DBS, $Na-DBS+Na_2CO_3,\;Na-DBS+Na_2\;SiO_3,\;Na-DBS+STPP,\;Na-DBS+Na_2\;CO_3+STPP$, and $Na-DBS+Na_2\;SiO_3+STPP$. The fabric was washed for 15 minutes at 23+$1^{\circ}C$ in a washing machine(Gold Star WP 3007) under the similar condition with those of home laundering, and rinsed 3 times in the same water hardness for 5 minutes. The calcium deposits on the fabric was determined by EDTA-BACK titration methods. The results of this study were as follows: 1) The amount of calcium deposits on the fabric was increased with increasing wash cycles. This deposit was due to the build up of insoluble calcium carbonate. 2) As the water hardness increased, the amount of calcium deposits on the fabric was increased. 3) Alkaline builders, such as, $Na_2CO_3$ and $Na_2SiO_3$, promoted calcium deposition on the fabric, however STPP prevented calcium deposition on the fabric. 4) Fabric laundered with $Na-DBS+Na_2CO_3$ showed the highest calcium deposits on the fabric, and decreased with the order of $Na_2CO_3$, $Na-DBS+Na_2SiO_3$, and Na-DBS. And fabrics washed with phosphate-built detergents showed a small amount of calcium deposition.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.871-876
• /
• 2013

The purpose of this study was to investigate antimicrobial effectiveness of Omija (Schizandra chinensis Baillon) treated with $ClO_2$ (chlorine dioxide) concentration (10, 15, 20, 25 and 30 ppm), washing time (30, 60 and 90 sec) and multiple proportion (x1, x2, x3 and x4). The seven groups were divided into control (Omija without washing water treatment), W-T (Omija treated by tap water ($20{\pm}1^{\circ}C$) for 30 seconds), $ClO_2$-10 (Omija treated by 10 ppm $ClO_2$), $ClO_2$-15 (Omija treated by 15 ppm $ClO_2$), $ClO_2$-20 (Omija treated by 20 ppm $ClO_2$), $ClO_2$-25 (Omija treated by 25 ppm $ClO_2$), $ClO_2$-30 (Omija treated by 30 ppm $ClO_2$), and then they were detected number of total aerobic bacteria, yeast and mold. The rate of inactivation was found, for microorganisms of total aerobic bacteria, yeast and mold, to increase with a increase of $ClO_2$ treatment concentration and multiple proportion. No total aerobic bacteria, yeast and mold in $ClO_2$-30 sample treated for 30 sec, $ClO_2$-15 treated for 60 sec and $ClO_2$-10 treated for 90 sec were detected, and in $ClO_2$-30 Omija with multiple proportion ${\times}1$ (Omija : 30 ppm $ClO_2$ solution ratio was 1:1 (w/w)), $ClO_2$-20 with ${\times}2$ (Omija : 20 ppm $ClO_2$ solution ratio was 1:2 (w/w)) and $ClO_2$-15 with ${\times}4$ (Omija : 15 ppm $ClO_2$ solution ratio was 1:4 (w/w)) respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.6
• /
• pp.479-486
• /
• 2008

The objective of this study is to investigate experimentally the characteristics of pressure drop in SMX type motionless mixers. The motionless mixers used are SMX-O, SMX-H, SMXL-O and SMXL-H ones. The SMX-H and SMXL-H mixer elements have been designed to reduce the pressure drop as compared with the SMX-O and SMXL-O ones. The Reynolds number based on the bulk average properties of the water is in a range of 5000 to 13000. The pressure drops across the motionless mixers are measured and the friction factors are calculated using the pressure drop data. On the average, the friction factors of the SMX-H and SMXL-H mixers are about 8% and 15% lower than those of the SMX-O and SMXL-O ones. In addition, the proposed correlations from the experimental data for the friction factor are presented and compared with those obtained from the literature.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.286-290
• /
• 2016

Background: Activation of air and water in the electron linear accelerator for medical use has not been considered severely. By the new Japanese regulation for protection of radiation hazard, it became indispensable to evaluate of activation of air and water in the accelerator room. The measurement of induced activity in air and water components in the electron energy region of 10 to 20 MeV is very difficult, because this energy region is close to the threshold energy region of photonuclear reactions. Then, we measured the photonuclear reaction yields of $^{13}N$, $^{15}O$, and $^{11}C$ by using the electron linear accelerator. Obtained data were compared with the data calculated by the Monte Carlo method. Materials and Methods: An activation experiment was performed at the Research Center for Electron Photon Science, Tohoku University. Highly purified $SiO_2$, $Si_3N_4$, and carbon disks were irradiated for 10 minutes by bremsstrahlung converted by a tungsten plate. Induced activity from C, N, and O was obtained. Monte Carlo calculation was performed using MCNP5 and AERY (DCHAIN-SP) to simulate the experimental condition. Cross section data were adopted the KAERI dataset. Results and Discussion: In our experiment in hospital, calculated values were not agreed with experimental values. It might be three possible reasons as the cause of this deference, such as irradiation energy, calculation procedure and cross section data. Obtained data of this work, calculated and experimental values were good agreement with each other within one order. In this work, we used KAERI dataset of photonuclear reaction instead of JENDL. Therefore, it was found that the photonuclear cross section data of light elements are most important for yield calculation in these reactions. Conclusion: Further improvement for calculation using a new dataset JENDL/PD-2015 and considering electron energy spreading will be needed.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.245-254
• /
• 2003

Stishovite was synthesized from hydrous basaltic starting materials at 10∼15 ㎬ and $1000∼1400^{\circ}C$. Water content of synthetic stishovite has been determined, and solid solution mechanism of $H_2$ and Al in stishovite was investigated. The maximum water content obtained from stishovite single crystal was up to $844\pm$44 ppm $H_2$O. The concentration of hydrogen increased with increasing substitution of trivalent cation, mainly Al. The temperature effect on the hydrogen content in stishovite is more sensitive than that on any other impurities. Among the nominally anhydrous mantle-minerals, stishovite could be an important water-containing phase and contribute to the transportation of $H_2$O to lower mantle.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.5
• /
• pp.8-15
• /
• 2010

The purpose of this research is to check the validation of an auto-analysis method combined with aqua regia digestion apparatus for improvement of water distillation method used as a fluorine test of soil. Fluorine contents of CaO used in the pretreatment course of water distillation method were 120 mg/kg ~ 5,064 mg/kg at the blank test, which was exceeded up to maximum 12.5 times of the soil standard, so it was estimated due to a effect of fluorine existing as impurities of CaO. The recovery test of the same samples indicated that water distillation method and auto-analysis method were 134.5mg/kg and 161.7mg/kg respectively, the recovery ratio of the latter was 16.8% higher than the formal. The validation test of two methods satisfied the standard, but auto analysis method was excellent more than distillation method. Also, auto analysis method could save a analysis time up to maximum 4.7 times by comparison with water distillation method.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.87-98
• /
• 2022

This study aims to prepare a technical protocol for identifying the source of nitrate in water using nitrogen (δ¹⁵N) and oxygen (δ¹⁸O) stable isotope ratios. The technical processes for nitrate sources identification are composed of site investigation, sample collection and analysis, isotope analysis, source identification using isotope characteristics, and source apportionment for multiple potential sources with the Bayesian isotope mixing model. Characteristics of various nitrate potential sources are reviewed, and their typical ranges of δ¹⁵N and δ¹⁸O are comparatively analyzed and summarized. This study also summarizes the current knowledge on the dual-isotope approach and how to correlate the field-relevant information such as land use and hydrochemical data to the nitrate source identification.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.847-849
• /
• 2001

The OSS2(Ojame-Shavitt-Singer 2)[L. Ojame et al., J. Chem. Phys. 109, 5547 (1998)] model as a dissociable water model is examined in order to study the dynamics of H+ in water. MD simulations for 216 water system, 215 water + H+ ion system, and 215 water + OH- ion system using the OSS2 model at 298.15 K with the use of Ewald summation are carried out. The calculated O-H radial distribution functions for these systems are essentially the same and are in very good agreement with that obtained by Ojame.

• Journal of the Korean Ceramic Society
• /
• v.15 no.1
• /
• pp.9-15
• /
• 1978

The possiblity of mullitization from the domestic alunite by adding of $Fe_2O_3-MnO_2$, $Fe_2O_3-MnO_2-TiO_2$, $Fe_2O_3-MnO_2-CaF_2$, and $Fe_2O_3-MnO_2-CaF_2-TiO_2$ mixtures as mineralizers was studied at the temperature range between $1, 250^{\circ}C$~$1, 430^{\circ}C$. The modifying method of domestic alunite was performed by calcination, wet ballmilling, and washing with water. The following results were obtained; 1) When added of 3.0% $Fe_2O_3$ plus 1.0-1.5% $MnO_2$ to modified alunite, the appropriate temperature range of mullite-forming was $1, 350^{\circ}C$-$1, 400^{\circ}C$. 2) When added of $TiO_2$ as mineralizer, the mullite-forming temperature was higher than not added. 3) When added of $CaF_2$ as mineralizer, the synthesized mullite was resolve at the temperature above $1, 350^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.8
• /
• pp.669-673
• /
• 1994

Coordination isomers of cis-(N-N)Pt(Glu) prepared by reaction of cis-(N-N)Pt($SO_4$) (N-N=2$NH_3$, ethylenediamine(en),(R,R)-1,2-diaminocyclohexane (DACH), N,N,N',N'-tetramethylethylenediamine (TMEDA)) with barium glutamate in water have been monitored and characterized by $^1H-NMR$, $^{13}C-NMR$, IR, and mass spectra. The reaction at room temperature affords the mixture of O,O'-and N, ${\alpha}$ O-chelated platinum(II) complexes. The O,O'-chelate initially formed isomerized to N,${\alpha}$O-chelate on standing for a long time or increasing temperature. The ratio of the two isomers at room temperature depends on the nature of the nitrogen donor coligand (N-N).