• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1995년도 제5회 학술강연회논문집
• /
• pp.11-30
• /
• 1995

The ignition characteristics of a reactive solid with rough surface by constant heat flux were studied. The geometry of surface was represented by a set of identical protrusions having a shape of wedge based on the block of reactive solid. Several regimes of ignition were found, depending on the ratio of the protrusion length and the depth of the heated layer, formed in course of ignition process: 1) when the substance is ignited as the massive block, and the effect of roughness is not pronounced; 2) when ignited are the individual protrusions; and 3) in the intermediate region between the first two. Critical ignition conditions: ignition time and ignition criterion, are determined for the three regimes. The results are compared with the results for the one-dimensional ignition of the semi-infinite body. It is shown, that the effect of geometry on ignition results in the considerable reduction of ignition delay, and the amount of energy required for the successful ignition is less compared to the one- dimensional case.

• 청정기술
• /
• 제23권4호
• /
• pp.429-434
• /
• 2017

저온 수성가스전이반응에서 $Cu/ZnO/MgO/Al_2O_3$ (CZMA) 촉매의 마그네슘의 영향을 조사하기 위하여 Cu/Zn/Mg/Al의 비율을 45/45/5/5 mol%로 공침법을 사용하여 제조하였다. 제조된 촉매들은 BET, $N_2O$ 화학흡착, XRD, $H_2-TPR$ and $NH_3-TPD$를 사용하여 분석되었다. 촉매 활성 테스트는 GHSV $28,000h^{-1}$와 온도 범위 $200{\sim}320^{\circ}C$에서 수행되었다. 동일한 조건에서 마그네슘이 첨가된 촉매(CZMA 400)는 가장 낮은 환원 온도를 나타내며 활성종인 $Cu^+$가 안정적으로 존재하고 또한 많은 약산점을 보유하였다. 또한 마그네슘이 첨가된 촉매(CZMA)는 마그네슘이 첨가되지 않은 촉매(CZA)와 비교하였을 때 240 이상의 높은 온도에서 촉매 활성이 증가하였다. CZMA 400 촉매는 최적의 촉매로서 $240^{\circ}C$, GHSV $28,000h^{-1}$에서 75 h 동안 활성의 저하없이 평균 CO 전환율 77.59%를 나타내었다.

• 한국자기학회지
• /
• 제15권4호
• /
• pp.226-230
• /
• 2005

본 연구에서는 스핀밸브 구조에서 하지층으로 많이 사용되고 있는 Ta 층에 질소를 첨가하여 질소량에 따른 자기적 특성과 열처리 결과를 비교 검토하였다. 또한 하지층에 질소를 첨가하여 확산 방지막으로서 역할과 기판과 하지층과의 접착력을 측정하여 비교하였다. 사용된 스핀밸브는 Si($SiO_2$)/Ta(TaN)/NiFe/CoFe/Cu/CoFe/FeMn/Ta 구조이다. Ta 박막에 비해 TaN 박막의 질소량이 증가할수록 증착률은 감소하였고, 비저항과 표면 거칠기는 증가하였다. 고온에서 열처리 후 측정한 XRD 결과를 보면 Si/Ta 박막에서는 규소화합물이 생성된 반면 Si/TaN 박막에서는 규소화합물을 발견할 수 없었다. 자기저항비(MR)와 교환결합자장($H_{ex}$)은 질소량이 4.0 sccm 이상에서는 감소하였다. 열처리 결과 자기저항비는 하지층이 Ta인 시편과 질소량이 4.0 sccm까지 혼합된 TaN 시편은 $200^{\circ}C$까지는 약 $0.5\%$ 정도 증가하다가 감소하였다. 기판과 하지층과의 접착력을 측정한 결과 Ta 박막보다 질소량이 8.0 sccm인 TaN 박막인 경우 약 2배 강한 접착력을 보였다. 본 연구 결과에 의하면 하지층 증착 시 아르곤 가스에 3.0 sccm 정도의 질소 가스를 혼합하여 사용하면 자기적 특성에 크게 영향을 주지 않으면서 확산 방지막, 접착력 향상등의 이점을 얻을 수 있으리라 사료된다.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.92-97
• /
• 2000

The treatment of the washout from small scale incinerator was performed physically, chemically and biologically. The results are as follows. 1. SS, FS removal efficiency of washout wastewater from incinerator was 67.4%, 37.4%, while SS, FS of sewage wastewater was removed 63.2% 35.4% respectively. 2. The optimal conditions for chemical coagulation turned out to be pH 7.5, alum(Al2O3 10%) 30ml/ι and polyelectrolyte(A-601P 0.1%) 4ml/ι. SS 86%, FS 89.5%, BOD 42.5% and CODMn, 63.5% was removed and the removal efficiency of some metals are shown as Pb 93.5%, Zn 86.5% and Fe 80.6%. The concentration of the effluent was SS 9mg/ι, BOD 98.4mg/ι, and CODMn 138.4mg/ι. 3. The removal efficiency in treating washout wastewater of incinerator through HBC-briquet media was getting higher with increasing HRT, and mixed wastewater with 1:1, 1:2 ratio could be met up to the standard limit with higher HRT than 12hr. Under the condition of 1:2 mix ratio and HRT 24 hr, removal efficiency of SS, BOD, CODMn, T-N and T-P was 92.1%, 90%, 87%, 48.2% and 48%, respectively, and the concentration of treated wastewater was SS 2.9 mg/ι, BOD 10.3mg/ι, CODMn 14.1mg/ι, T-N 11.6 mg/ι and T-P 1.3 mg/ι, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권3호
• /
• pp.321-325
• /
• 2002

Karyotype analysis was carried out on blood samples of 30 water buffaloes belonging to different breed groups (i.e. Philippine Carabao (PC), Indian Murrah (IM), Bulgarian Murrah (BM), "$F_1$ 50% IM-50% PC", "$F_1$ 50% BM-50% PC" and "75% IM-25% PC"), using the modified Leucocyte Culture Technique. The modal chromosome numbers of the PC, "$F_1$ 50% IM-50% PC", "$F_1$ 50% BM-50% PC", IM, BM and "75% IM-25% PC" were 2n=48, 49, 49, 50, 50 and 50, respectively. The water buffalo chromosomes are mostly acrocentric (79.67%) and the remainder submetacentric (20.33%). Results of the ordinary least square analysis showed significant breed effects (p<0.01) on other karyotypic characteristics (i.e. relative length, arm ratio and centromeric index). Significant correlation between karyotypic characteristics and some animal performance traits were also found. The significant correlation values imply that karyotypic characteristics can be used as important criteria to select potentially productive young water buffaloes. In the future, more production and reproduction traits from non-institutional herds should be included in the analysis to reveal meaningful correlations with various karyotypic characteristics.

• 한국식물병리학회지
• /
• 제13권1호
• /
• pp.46-56
• /
• 1997

Based on the principal component analysis (PCA) of Richards' parameter estimates, ginseng field soils were grouped as the principal component 1 (PC1) and the principal component 2 (PC2). The microflora and physico-chemical characteristics of each soil group were compared to elucidate soil environmental factors affecting the disease development of root rot of ginseng seedling. Among 3 soil groups by PC1, there were differences in the populations of total fungi (TF) and Cylindrocarpon plus Fusarium (C+F), and the population ratio of Cylindrocarpon plus Fusarium to total fungi or total bacteria (C+F/TF, C+F/TB) in rhizoplane of ginseng seedlings, the population of total actinomycetes (TA) and the population ratio of total Fusarium to total actinomycetes (Fus/TA) in soil, and soil chemical properties (EC, NO3-N, K, Mn, ect.). Among 4 soil groups by PC2, there were differences in TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane, Trichoderma plus Gliocladium (T+G) in soil, and P2O5 content in soil. Especially, EC, NO3-N, K, K/Mg and Mn were positively correlated to PC1, and TA was negatively to PC1; however, TF, C+F, TB, C+F/TF and C+F/TB in the rhizoplane were significantly correlated to PC2 positively. On the other hand, microbes in the rhizoplane were not significantly correlated to the stand-missing rate (SMR), although TA and Fe/Mn were negatively correlated, and pH and Ca were positively correlated to SMR.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권8호
• /
• pp.319-324
• /
• 2003

AIN thin films are deposited on Si (100) and $SiO_2$/Si substrates by using an RF magnetron sputtering method and by changing the conditions of deposition variables, such as RF power, $N_2$/Ar flow ratio, and substrate temperature ($T_sub$). For all the deposited AIN films, XRD Peak patterns are monitored to examine the effect of deposition condition on the crystal orientation. Highly (002)-oriented AIN films are obtained at following nominal deposition conditions; RF Power : 350W, $N_2$/Ar ratio = 10/20, T$_{sub}$ : $250^{\circ}C$, and working pressure = 5mTorr, respectively. AIN-based SAW devices are fabricated using a lift-off method by varying the thickness of AIN layer. Insertion losses and side-lobe rejection levels of fabricated SAW devices are extracted from their frequency response characteristics, which are also compared in terms of AIN thickness and substrate. Relationships between the film properties of AIN films and the frequency responses of SAW devices are discussed. It is concluded from the experimental results that the (002)-preferred orientation as well as the surface roughness of AIN film may play a crucial role of determining the device performances of AIN-SAW devices.s.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.406-409
• /
• 1999

Experimental Investigations were carried out to remove NOx, SOx simultaneously from simulated flue gas[NO(0.02%)-SO$_2$(0.08%)-$CO_2$-Air-$N_2$] by using a plasma chemical reaction. Ammonia gas(14.81%) balanced by argon was diluted by all and was Introduced to mall simulated flue gas duct through NH$_3$ Injection system which is in downstream of reactor. The NH$_3$ molecular ratio(MR) was determined based on (NH3) to [NO+S0$_2$]. MR is 1, 1.5, 2.5. The NOx removal rate significantly increased with increasing NaOH bubble quantity. The SO$_2$ removal rate was not significantly effected by applied voltage, however it fairly Increased with increasing NH$_3$ molecule ratio. By-product aerosol particle was observed by XRD(X-ray diffraction) after sampling, The NOx, SOx removal rates, when H2O vapour bubbled by dry all was injected to plasma reactor, were better than those of other cases. When aqueous NaOH solution(20%) bubbled by 2.5( ι /min) of $N_2$ and 0.5 ( ι /min) NH$_3$(MR=1.5) were injected to simulated flue gas, The NOx. SOx removal rate was 95 ~ 100[%]

• 천문학회보
• /
• 제37권2호
• /
• pp.74.2-74.2
• /
• 2012

Metallicity is an important tracer of star formation in galaxy evolution. Based on the flux ratios of broad emission lines, AGN metallicity has shown a correlation with AGN luminosity. However, it is not clear what physical parameter drives the observed correlation. Using a sample 69 Palomar-Green QSOs at low-z (z<0.5), we determine BLR gas metallicity from emission line flux ratios, i.e., N V1240/C IV1549, (Si IV1398+O IV1402)/C IV1549 and N V1240/He II1640 based on the UV spectra from the HST and IUE archives. We compare BLR gas metallicity with various AGN properties, i.e., black hole mass, AGN luminosity and Eddington ratio, in order to investigate physical connection between metal enrichment and AGN activity. In contrast to high-z QSOs, which show the correlation between metallicity and black hole mass, we find that the metallicity of low-z QSOs correlates with Eddington ratio, but not with black hole mass, suggesting that metallicity enrichment mechanism is different between low-z and high-z.

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.422-426
• /
• 1999

The Grignard reactions of bis(chloromethyl)dimethylsilane (1) with trimethylchlorosilane (2) in THF give both the intermolecular C-Si coupling and intramolecular C-C coupling products. At beginning stage, 1 reacts with Mg to give the mono-Grignard reagent ClCH2Me2SiCH2MgCl (1) which undergoes the C-Si coupling reaction to give MC2Si(CH2SiMe3)2 3, or C-C coupling to a mixture of formula Me3SiCH2(SiMe2CH2CH2)nR1 (n = 1, 2, 3, ..; 4a, R1I = H: 4b, R1 = SiMe3). In the reaction, two reaction pathways are involved: a) Ⅰ reacts with 2 to give Me3SiCH2SiMe2CH2Cl 6 which further reacts with Mg to afford a Me2SiCH2Mel-SiCH2MgCl (Ⅱ) or b) I cyclizes intramolecularly to a silacyclopropane intermediate A, which undergoes a ring-opening polymerization by the nucleophilic attack of the intermediates I or Ⅱ, followed by the termination reaction with H2O and 2, to give 4a and 4b, respectively. As the mole ratio of 2/1 increased from 2 to 16 folds, the formation of product 3 increased from 16% to 47% while the formation of polymeric products 4 was reduced from 60% to 40%. The intermolecular C-Si coupling reaction of the pathway a becomes more favorable than the intramolecular C-C coupling reaction of the pathways b at the higher mole ratio of 2/1.