• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1037-1041
• /
• 2001

저온(32$0^{\circ}C$)에서 SiH$_4$와 $N_2$O 가스의 혼합을 통해 플라즈마화학기상증착(PECVD)법을 이용하여 실리카 광도파로의 클래딩막으로 사용되는 SiO$_2$후막을 제조하였다. 증착변수가 SiO$_2$후막의 특성에 미치는 영향을 살펴보기 위해 $N_2$O/SiH$_4$flow ratio와 RF power에 변화를 주었다. $N_2$O/SiH$_4$ flow ratio가 감소함에 따라 증착속도는 2.9 $mu extrm{m}$/h), 굴절률은 thermal oxide의 굴절률(n=1.46)에 근접하였다.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.737-743
• /
• 2006

[ $Li[Co_{0.50}Li_{0.17}Mn_{0.33}]O_2$ ] powder was prepared using a simple combustion method. specially, ratio of 2:1, 3:2, 1:1, 2:3, 1:2 was adopted as acetate source/nitrate source. The diffraction pattern of $Li[Co_{0.50}Li_{0.17}Mn_{0.33}]O_2$ powder showed that this compound could be classified as hexagonal $a-NaFeO_2$ structure (space group : $R\bar{3}m$). The size of powder was less than $1{\mu}m$. Small particle size of cathode powder would give a good ionic and electronic conductivity to cathode electrode, which made of cathode powder. As the increase of nitrate source-ratio, discharge capacity of $Li[Co_{0.50}Li_{0.17}Mn_{0.33}]O_2$ at high charge-discharge rate was increased. When the ratio of acetate source/nitrate source was 1:2, discharge capacity at 10 C rate (2000 mA/g) was 180 mAh/g. It was $10{\sim}15%$ larger than that of powder, which have 2:1 as acetate source/nitrate ratio.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.669-678
• /
• 2009

The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.81-85
• /
• 1996

Microwave dielectric properties of 0.15(B $a_{x}$S $r_{0.05}$)O-0.15(S $m_{2}$(1-y)N $d_{2y}$) $O_{3}$-0.7Ti $o_{2}$(x=o.9~0.1[mol.], y=6[m/o]) ceramics were investigated with BaO compositional ratio. Sintered density and resistivity of specimens were independent on the BaO compositional ratio. In the specimen with x=0.975[mol.], dielectric constant, quality factor and temperature coefficient of resonant frequency had good values of 76.52, 3001(at 3[GHz]) and +0.71[ppm/.ceg. C], respectively. By comparing with the stoichiometric compositions of 78.14, 2938(at 3[GHz])+14.19[ppm/.ceg. C], dielectric constant and quality factor showed similar properties, but the temperature coefficient of resonant frequency was highly improved. (author). refs., figs., tabs.s.s.

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.448-454
• /
• 2007

미세 $BaTiO_3$ 분말의 합성을 위해 함수 티타니아와 수산화바륨을 원료로 수열합성 실험을 수행하여, 반응시간, 온도, 농도 변화에 따른 전화율, 결정구조 및 생성 분말의 물성을 조사하였다. 전화율에 미치는 영향은 시간 < 온도 < 농도 순이었으며, 2.0 M의 원료를 $180^{\circ}C$에서 2 h 수열합성 시킬 때 최대 전화율을 99.5%를 얻을 수 있었다. 낮은 농도(0.25 M)에서는 고온에서도 미반응 $BaCO_3$와 미반응 $TiO_2$ 생성을 피할 수 없었으며, 이 미반응 물질들은 고온에서 $BaTi_2O_5$를 생성시켜 불순물로 존재하였다. 농도를 높일수록 합성 $BaTiO_3$ 분말의 크기는 작아졌으며, 분말의 Ba/Ti 비도 1에 접근하였다. 2.0M 이상의 농도에서는 $180^{\circ}C$, 2 h 반응에서 Ba/Ti 비는 $1{\pm}0.005$ 이였다.

• 센서학회지
• /
• 제31권2호
• /
• pp.125-130
• /
• 2022

We describe the importance of zinc oxide nanoparticle (ZnO NP) concentration in the enhancement of electrical properties in a lead sulfide quantum dot (PbS QD)-based shortwave infrared (SWIR) photodetector. ZnO NPs were synthesized using the sol-gel method. The concentration of the ZnO NPs was controlled as 20, 30 and 40 mg/mL in this study. Note that the ZnO NPs layer is commonly used as an electron transport layer in PbS QDs SWIR photodetectors. The photo-to-dark ratio, which is an important parameter of a photodetector, was intensively examined to evaluate the electrical performance. The 20 mg/mL condition of ZnO NPs exhibited the highest photo-to-dark ratio value of 5 at -1 V, compared with 1.8 and 0.4 for 30 mg/mL and 40 mg/mL, respectively. This resulted because the electron mobility decreased when the concentration of ZnO NPs was higher than the optimized value. Based on our results, the concentration of ZnO NPs was observed to play an important role in the electrical performance of the PbS QDs SWIR photodetector.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.594-597
• /
• 2003

In the present study, the piezoelectricity and polarization of multilayer ceramic actuator, being designed to stack PMN-PZ-PT ceramic layers and Ag-Pd electrode layers alternatively, were investigated under a consideration of geometric factor, the volume ratio of the ceramic to the electrode layers. The actuators were fabricated by tape casting of 0.2Pb(Mg1/3Nb2/3)O3-0.38PbZrO3-0.42PbTiO3 followed by lamination and burnout & co-firing processes. The actuators of 10 10 0.62 nm3 in size were formed in a way that 60 200 m thick ceramics were stacked alternatively with 5 m thick electrode layer. Increases in polarization and electric field-induced displacement with thickness of the ceramic layer were attributed to change of 90o/180o domain ratio, which was affected by interlayer internal stress. The piezoelectricity and actuation behaviors were found to depend upon the volume ratio (or thickness ratio) of ceramic to electrode layers.

• 핵의학기술
• /
• 제18권2호
• /
• pp.68-72
• /
• 2014

핵의학 검사는 반감기로 인한 동위원소의 잔류로 당일에 두 가지 검사를 시행하는데 어려움이 있다. 본 연구는 $^{18}F$-FDG와 $^{99m}TcO_4{^-}$의 상호 영향을 연구함으로써 당일 검사를 진행할 경우 고려될 사항에 대해 알아보고자 한다. NEMA-1994 Phantom을 이용하여 세 번의 실험을 진행했다. 첫 실험은 $^{99m}TcO_4{^-}$을 HOT과 BKG 비 4:1로 만들어 GE사의 INFINIA 장비로 SPECT를 시행하였고, BKG 영역에 $^{18}F$-FDG 37 MBq을 주입 후 동일 조건으로 60분에 1회씩 13회 Scan 했다. 두 번째는 $^{18}F$-FDG를 HOT과 BKG 비 4:1 로 만들어 GE사의 PET/CT Discovery 600 에서 Scan 하였고, BKG 영역에 $^{99m}TcO_4{^-}$을 148 MBq 주입 후 동일 조건으로 60분에 1회씩 6회 Scan 했다. 마지막 실험은 $^{18}F$-FDG를 HOT과 BKG 비 4 : 1로 만들고 1 Bed Scan 후 $^{99m}TcO_4{^-}$을 148 MBq 및 296 MBq씩 증가 시키며 같은 조건으로 1 Bed Scan했다. HOT과 BKG 영역의 비, CNR 혹은 SNR 그리고 총 획득 계수를 측정 후 비교 했다. $^{18}F$-FDG는 SPECT 시행 시 비율 및 CNR에 유의한 차이를 보였다(p>0.05). $^{99m}TcO_4{^-}$는 PET/CT 시행 시 비율 및 SNR이 유의한 차이를 보이지 않았다(p<0.05). $^{99m}TcO_4{^-}$이 PET/CT 검사의 Total Counts를 감소시킨다는 결과를 획득했다. PET/CT 검사를 한 경우 12시간 까지도 $^{99m}TcO_4{^-}$을 이용한 검사에 영향을 미칠 수 있으며, $^{99m}TcO_4{^-}$를 먼저 시행한 경우에는 PET/CT 검사에 SUV 및 SNR에 영향은 없지만 검출 효율을 감소시켰다. 당일 검사 시에는 $^{99m}TcO_4{^-}$을 이용한 검사를 먼저 진행하고 PET/CT의 검사 시간을 늘려 검출 효율을 보완하는 방법을 권장하고자 한다.

• 대한핵의학회지
• /
• 제23권1호
• /
• pp.41-48
• /
• 1989

$^{99m}Tc-Pertechnetate\;(TcO_4^-)$ is concentrated by the stomach after intravenous injection, allowing the detection of ectopic gastric mucosa. It has been used to develop a noninvasive test of gastric secretion. However the cellular site of concentration is still controversial, that is whether mucin-secreting epithelial cell or acid-secreting parietal cell. This study is planned to investigate the effects of cimetidine and gastric acidity on the retention of $TcO_4^-$ in the gastric wall of the rat. Also we further attempted to clarify the uptake and secreting cell of $TcO_4^-$ in the gastric mucosa. One hundred rats were divided into two groups, preliminary (40 rats) and main examination group (60 rats). Preliminary examination group was composed of fasting group (20 rats) for the detection of the time for reaching stable $TcO_4^-$ retention ratio in gastric wall and post-prandial group (20 rats) for the detection of the time for reaching the maximal gastric acidity. Main examination group was composed of fasting group (30 rats), which was subdivided into control group (10 rats), cimetidine group (10rats), $Mylanta^{(R)}$ group (10 rats) and post?prandial group (30 rats), which was subaivided into 90 min group (10 rats), 90 min cimetidine group (10 rats), and 120 min group (10 rats). Retention ratio (%) of $TcO_4$ in the gastric wall and the pH of the gastric contents were measured in the extracted stomach of the six groups. Gastric wall retention ratio of $TcO_4^-$ was calculated by the gastric wall radioactivity (cpm) divided by total gastric radioactivity (cpm) at 30 mins after intravenous injection of 0.4 mCi of $TcO_4^-$. The results were as follows: 1) The time required for reaching stable $TcO_4$ retention ratio and the lowest gastric PH were 30 min and 90 min, respectively. 2) In the fasting group, the gastric wall retention ratio of $TcO_4^-$ was significantly increased in the cimetidine group, compared with the control group (P < 0.01). However there was no significant difference between the control and $Mylanta^{(R)}$ group 3) The $TcO_4^-$ retention ratios of 90 min and 120 min groups were lower than that of the fasting control group (p < 0.05), either. After administration of cimetidine, the retention ratio was significantly increased in 90 min group (p < 0.01). 4) While $TcO_4^-$ retention ratio and gastric pH were well correlated in the post-prandial 120 min group (r=0.7112, p<0.05), in the post-prandial 90 min and 90 min cimetidine groups correlated poorly. However, there was no correlation in the three fasting groups at all. Referring the above results, we infer that $TcO_4^-$ is secreted into the gastric lumen by both parietal and non-parietal cells, with dominant non-parietal $TcO_4^-$ secretion in the fasting state and dominant parietal $TcO_4^-$ secretion in the stimulated state.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권1호
• /
• pp.86-93
• /
• 2016

Fenton is the reaction using the OH· radicals generating by interaction between hydrogen peroxide and Fe²⁺ which can oxidize the contaminants. Fe²⁺ ions are oxidized to Fe³⁺ ions by reaction with H₂O₂ and formed OH· radicals. UV-Fenton process includes the additional reaction that generates the OH· radicals by photodegradation of H₂O₂. In methylorange (MO) decolourization experiment with UV-Fenton, optimal Fe²⁺: H₂O₂ ratio was obtained at 1 : 10. Based on the obtained condition (H₂O₂= 10mM, Fe²⁺ = 1 mM) with/without UV-fenton experiment was carried out. Removal efficiency and sludge production were measured at 30 min. The case of w/o UV irradiation and only H₂O₂ was hardly treated and only Fe²⁺ showed 65% removal owing to coagulation. When UV-Fenton process in optimal ratio (Fe²⁺: H₂O₂ = 1 : 10), UV irradiation showed better removal efficiency than of w/o UV irradiation. Also, MO decolourization was a function of the hydrogen peroxide concentration (x₁), Fe²⁺:H₂O₂ ratio (x₂), and numbers of UV lamp (x₃) from the application of the response surface methodology. Statistical results showed the order of significance of the independent variables to be hydrogen peroxide concentration > numbers of UV l amp > Fe²⁺: H₂O₂ ratio.