• Structural Engineering and Mechanics
• /
• 제56권1호
• /
• pp.49-56
• /
• 2015

Dynamic compaction (DC) is a useful method for improvement of granular soils. The method is based on falling a tamper (weighting 5 to 40 ton) from the height of 15 to 30 meters on loose soil that results in stress distribution, vibration of soil particles and desirable compaction of the soil. Propagation of the waves during tamping affects adjacent structures and causes structural damage or loss of performance. Therefore, determination of the safe or critical distance from tamping point to prevent structural hazards is necessary. According to FHWA, the critical distance is defined as the limit of a particle velocity of 76 mm/s. In present study, the ABAQUS software was used for numerical modeling of DC process and determination of the safe distance based on particle velocity criterion. Different variables like alluvium depth, relative density, and impact energy were considered in finite element modeling. It was concluded that for alluvium depths less than 10 m, reflection of the body waves from lower boundaries back to the soil and resonance phenomenon increases the critical distance. However, the critical distance decreases for alluvium depths more than 10 m. Moreover, it was observed that relative density of the alluvium does not significantly influence the critical distance value.

• Structural Engineering and Mechanics
• /
• 제22권3호
• /
• pp.331-349
• /
• 2006

The stresses and deflections in a laminated rectangular plate under thermal vibration are determined by using the moving least squares differential quadrature (MLSDQ) method based on the first order shear deformation theory. The weighting coefficients used in MLSDQ approximation are obtained through a fast computation of the MLS shape functions and their partial derivatives. By using this method, the governing differential equations are transformed into sets of linear homogeneous algebraic equations in terms of the displacement components at each discrete point. Boundary conditions are implemented through discrete grid points by constraining displacements, bending moments and rotations of the plate. Solving this set of algebraic equations yields the displacement components. Then substituting these displacements into the constitutive equation, we obtain the stresses. The approximate solutions for stress and deflection of laminated plate with cross layer under thermal load are obtained. Numerical results show that the MLSDQ method provides rapidly convergent and accurate solutions for calculating the stresses and deflections in a multi-layered plate of cross ply laminate subjected to thermal vibration of sinusoidal temperature including shear deformation with a few grid points.

• 한국통신학회논문지
• /
• 제15권11호
• /
• pp.879-885
• /
• 1990

준정적 근사법을 적용하여 평탄한 단면(End cap)을 포함하는 회전체에 유기되는 전류에 대한 적분방정식을 유도하고 모멘트법을 이용해서 해석하였다. 수체해석시 기저함수로 Cubic B Spline 함수, 가중함수로 델타함수를 사용한 Point Matching Method를 사용하였다. 또한 끝단에 둥근타원체(Spheroidal end cap)를 갖는 경우 및 평탄한 단면을 갖는 원통주의 구조변수 변화에 따른 영향관계를 해석하였다.

• 한국경영과학회지
• /
• 제23권4호
• /
• pp.131-140
• /
• 1998

The objective of this study is to propose a new procedure to synthesize the multi-experts priorities in AHP. If multi-experts with different expertise are involved in a AHP decision, we need some way to aggregate their opinions. AHP model used to do numerical aggregation by taking only the geometric mean or the weighting geometric mean in past. To aggregate the multi-experts priorities, In this paper. we suggest a way which Decision Maker can exclude outlier matrix from group using the concept of the Compatibility and we Introduce Delphi method to use Compatibility in AHP. A numerical example is shown to illustrate the procedure.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.155-163
• /
• 1999

A numerical study for simulating a swirling pulverized coal combustion in axisymmetric geometry is done here by applying the weighted sum of gray gases model (WSGGM) approach with the discrete ordinate method (DOM) to model the radiative heat transfer equation. In the radiative transfer equation, the same polynomial equation and coefficients for weighting factors as those for gas are adopted for the coal/char particles as a function of partial pressure and particle temperature. The Eulerian balance equations for mass, momentum, energy, and species mass fractions are adopted with the standard ${\kappa}-{\varepsilon}$ turbulence model, whereas the Lagrangian approach is used for the particulate phase for soot. The eddydissipation model is employed for the reaction rate for gaseous mixture, and the single-step first-order reaction model for the devolatilization process for coal. By comparing the numerical results with experimental ones, the models used here are confirmed and found to be one of good alternatives for simulating the combustion as well as radiative characteristics.

• 대기
• /
• 제31권2호
• /
• pp.185-198
• /
• 2021

In this study, we examined a spatial downscaling method based on Gradient and Inverse Distance Squared (GIDS) weighting to produce high-resolution grid data from a numerical weather prediction model over Korean Peninsula with complex terrain. The GIDS is a simple and effective geostatistical downscaling method using horizontal distance gradients and an elevation. The predicted meteorological variables (e.g., temperature and 3-hr accumulated rainfall amount) from the Limited-area ENsemble prediction System (LENS; horizontal grid spacing of 3 km) are used for the GIDS to produce a higher horizontal resolution (1.5 km) data set. The obtained results were compared to those from the bilinear interpolation. The GIDS effectively produced high-resolution gridded data for temperature with the continuous spatial distribution and high dependence on topography. The results showed a better agreement with the observation by increasing a searching radius from 10 to 30 km. However, the GIDS showed relatively lower performance for the precipitation variable. Although the GIDS has a significant efficiency in producing a higher resolution gridded temperature data, it requires further study to be applied for rainfall events.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1244-1254
• /
• 2015

This paper proposes a new method for tuning a linear quadratic - proportional integral derivative controller for second order systems to simultaneously meet the time and frequency domain design specifications. The suitable loop-shape of the controlled system and the desired step response are considered as specifications in the time and frequency domains, respectively. The weighting factors, Q and R of the LQ controller are determined by the algebraic Riccati equation with respect to the limiting behavior and target function matching. Numerical examples show the effectiveness of the proposed LQ-PID tuning method

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.65-71
• /
• 2004

원자력 시설의 사고시 환경으로 방출된 방사성물질로부터 초기 주민의 피해 최소화를 위한 대응행위 결정지원 방안으로 다속성 효용분석 법이 고찰되었다. 속성의 효용함수는 비선형 2차 함수로 가정하였으며, 속성의 가중계수는 swing weighting 방법을 사용하여 결정하였다. 본 연구는 원자력시설의 사고시 초기 대응행위 결정지원을 위한 다속성 효용분석법의 적용성에 한정하며, 스트레스 등과 같은 비정량적 속성은 아직까지 자료의 부족으로 포함하지 않았다. 가상사고 시나리오를 구성하여 무대응, 대피, 소개에 대해 속성 값의 변화에 따른 행위에 대한 총 효응 값을 고찰하였다. 적용한 결과, 피폭선량과 선량의 금전가의 변화에 따라 행위의 총 효용 값은 뚜렷이 다르게 나타났다. 피폭선량과 선량의 금전가의 증가에 따라 대피보다 사회적 영향 등 여러 측면에서 보다 극단적인 대응행위인 소개의 총 효용 값의 순위는 뚜렷이 증가한 반면, 무 대응의 순위는 감소하였다. 선량의 기대 확률도 대응행위 결정지원에 있어서 중요한 변수로 나타났는데, 상대적으로 고선량의 기대 확률이 높을수록 행위의 우선 순위가 바뀌는 교차점에서 선량의 금전가는 보다 낮게 나타냈다. 또한 선량에 대한 회피심리가 강하게 적응할수록 행위의 우선 순위가 바뀌는 선량의 교차점은 보다 낮게 나타났다.

• 한국유체기계학회 논문집
• /
• 제10권2호
• /
• pp.7-15
• /
• 2007

A numerical procedure for optimizing the shape of three-dimensional channel with V-shaped ribs extruded on both walls has been carried out to enhance the turbulent heat transfer. The response surface based optimization is used as an optimization technique with Reynolds-averaged Wavier-stoked analysis. Shear stress transport (SST) turbulence model is used as a turbulence closure. Computational results for average heat transfer rate show good agreements with experimental data. The objective function is defined as a linear combination of heat transfer and friction loss-related terms with a weighting factor. Three dimensionless variables such as, rib pitch-to-rib height ratio, rib height-to-channel height ratio, and the attack angle of the rib are chosen as design variables. Nineteen training points obtained by D-optimal designs for three design variables construct a reliable response surface. In the sensitivity analysis, it is found that the objective function is most sensitive to the ratio of rib height-to-channel height ratio. And, optimal values of design variables have been obtained in a range of the weighting factor.

• 한국전산구조공학회논문집
• /
• 제30권3호
• /
• pp.191-198
• /
• 2017

발하중을 받는 구조물의 거동을 연구하기 위해서는 폭발물에 의한 하중을 정확히 산정하는 것이 중요하며 실내폭발의 폭발하중의 경우에는 특히 그러하다. 반사효과를 포함하는 실내폭발의 폭발하중 산정방법으로는 전산유체역학을 기반으로 한 수치해석적 방법이 비교적 정확한 폭발하중을 산정할 수 있다고 알려져 있다. 하지만 수치해석적 방법은 해석모델링이 어렵고 해석에 많은 시간이 소요되는 단점이 있다. 따라서 본 연구에서는 실내폭발에서 고려되어야 하는 여러 효과 중 대표적인 반사효과를 간단히 반영할 수 있는 해석적 폭발하중 산정방법을 연구하였다. 대상 구조물은 큰 인명피해와 연쇄붕괴를 일으킬 수 있는 실내폭발하중을 받는 주거시설의 슬래브로 설정하였다. 우선 수치해석적 방법을 이용해 실내폭발 효과와 탄성체로 가정한 슬래브의 최대 처짐을 알아보고, 이를 본 연구에서 제안하는 해석적 방법과 비교를 하였다. 제안된 해석적 방법에서는 보 이론을 적용한 반사효과의 가중치를 결정함으로써 보다 정확한 폭발하중 산정방법이 되도록 하였다.