1 |
Lopez, J. R, Anand, N. K. and Fletcher, L. S., 1996, 'Heat Transfer in a Three-Dimensional Channel with Baffles,' Numerical Heat Transfer, Part A 30, pp. 189-205
DOI
ScienceOn
|
2 |
H. M. Kim and K. Y. Kim, 2004, 'Design Optimization of Three-dimensional Channel Roughened by Oblique Ribs Using Response Surface Method,' Transaction of KSME B, Vol. 28, No. 7, pp. 879-886
DOI
ScienceOn
|
3 |
H. M. Kim and K. Y. Kim, 2004, 'Design Optimization of Rib-roughened Channel to enhance turbulent Heat Transfer,' International Journal of Heat and Mass Transfer, Vol. 47, Issue 23, pp. 5159-5168
DOI
ScienceOn
|
4 |
Tatsumi, K., Iwai, J. and Suzuki, K., 2003, 'The Effects of Oblique Discrete Rib Arrangement on Heat Transfer Performance of a Square Duct,' Proceedings of the International Gas Turbine Congress 2003, Tokyo, November 2-7, IGTC2003Tokyo TS-082
|
5 |
Guinta, A. A., 1997, 'Aircraft Multidisciplinary Design Optimization Using Design of Experimental Theory and Response Surface Modeling Methods,' Ph. D. Dissertant, Department of Aerospace Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA
|
6 |
Bardina, J. E., Huang, P. G. and Coakley, T., 1997, 'Turbulence Modeling Validation,' AIAA Paper 97-2121
|
7 |
K. Y. Kim and S. S. Kim, 2002, 'Shape Optimization of Rib-roughened Surface to Enhance Turbulent Heat Transfer,' International Journal of Heat and Mass Transfer, Vol. 45, Issue 13, pp. 2719-2727
DOI
ScienceOn
|
8 |
CFX -5.7.1 Solver Theory, Ansys Inc., 2005
|
9 |
Menter, F. and Esch, T., 2001, 'Elements of Industrial heat Transfer Predictions,' 16th Bazilian Congress of Mechanical Engineering, Uberlandia, Brazil
|
10 |
Ahn, C. S. and Kim, K. Y., 2003, 'Aerodynamic Design Optimization of a Compressor Rotor with Navier-StokesAnalysis,' Proceedings of The Institution of Mechanical Engineers, Part A – J. Power and Energy, Vol. 217, pp. 179-184
DOI
ScienceOn
|
11 |
Sobieszczanski-Sobieski, J. and Haftka, R. T., 1996, 'Multi Disciplinary AerospaceDesign Optimization: Survey of Recent Development,' AIAA 96-0711
|
12 |
Shyy, W., Papila, N., Vaidyanathan, R. and Tucker, K., 2001, 'Global Design Optimization for Aerodynamics and Rocket Propulsion Components,' Progress in Aerospace Sciences, Vol. 37, pp. 59-118
DOI
ScienceOn
|
13 |
Rau, G., Cakan, M., Moeller, D. and Arts, T., 1998, 'The Effect of Periodic Ribs on the Local Aerodynamic and Heat Transfer Performance of a Straight Cooling Channel,' ASME J. of Turbomachinery, Vol. 120, pp. 368-375
DOI
ScienceOn
|
14 |
Jia, R. and Sunden, B., 2003, 'Prediction of Turbulent Heat Transfer and Fluid Flow in 2D Channels Roughened by Square and Deformed Ribs,' ASME GT-2003-38226
|
15 |
Berger, F. P. and Hau, L. F., 1979, 'Local Mass /Heat Transfer Distribution on Surface Roughened with Small Square Ribs,' Int. J. Heat Mass Transfer, Vol. 22, pp. 1645-1656
DOI
ScienceOn
|
16 |
Cho, H. H., Lee, S. Y. and Wu, S. J., 2001, 'The Combined Effects of Rib Arrangements and Discrete Ribs on Local Heat/Mass Transfer in a Square Duct,' IGTI Turbo Expo Paper No. 2001-GT -0175, Louisiana, USA
|
17 |
M. E. Taslim, T. Li and D. M. kercher, 1996, 'Experimental Heat Transfer and Friction in Channels Roughened with Angled, V-shaped, and Discrete Ribs on Two Opposite Walls,' Journal of Turbomachinery, Vol. 119, pp. 381-389
DOI
|
18 |
R. T. Kukreja, S. C. Lau and R. D. Mcmillin, 1993, 'Local Hear/mass transfer distribution in a square channel with full and V-shaped ribs,' International Journal of Heat and Mass Transfer, Vol. 36, No. 8, pp. 2013-2020
DOI
ScienceOn
|
19 |
R. Jia, A. Saidi, and B. Sunden, 2002, 'Heat Transfer Enhancement In Square Ducts With V-shaped Ribs of Various Angles,' Proceedings of ASME TURBO EXPO 2002, Amsterdam, June 3-6, GT-2002-30209
|
20 |
M. E. Taslim, C. M. Wadsworth, 1997, 'An Experimental Investigation of the Rib Surface-Avraged Heat Transfer Coefficient in a Rib Roughened Square Passage,' Journal of Turbomachinery, Vol. 119, pp. 381-389
DOI
|
21 |
K. Abe, T. Kondoh and Y. Nagano, 1994, 'A New Turbulence Model for Predicting Fluid Flow and Heat Transfer in Separating and Reattaching Flows-I Flow Field Calculation,' International Journal of Heat and Mass Transfer, Vol. 37, pp. 139-151
DOI
ScienceOn
|
22 |
G. Su and H. C. Chen, J C. Han, 2003 'Computation of Flow and Heat Transfer in Rotating Rectangular Channels (AR=4) with V-shaped Ribs by A Reynolds Stress Turbulence Model,' Proceedings of ASME TURBO EXPO 2003, Atlanta, June 16-19, GT2003-38348
|
23 |
H. M. Kim and K. Y. Kim, 2004, 'Shape Design of Heat Transfer Surfaces with Angled Ribs Using Numerical Optimization Techniques,' Transaction of KSME B, Vol. 28, No. 9, pp. 1051-1057
DOI
ScienceOn
|
24 |
H. M. Kim and K. Y. Kim, 2004, 'Shape Optimization of Heat Transfer Surfaces with Staggered Ribs to Enhance Turbulent Heat Transfer,' Transaction of KSME B, Vol. 27, No. 9, pp. 1351-1359
|
25 |
Myers, R. H. and Montgomery, C. C., 1995, 'Response Surface Methodology: Progress and Product Optimization Using Designed Experiments,' John Wiley & Sons
|
26 |
J. C. Han, Y. M. Chang and C. P. Lee, 1991 'Augmented Heat Transfer in Square Channels with Parallel, Crossed and V-shaped Angled ribs,' Journal of Heat Transfer, Vol. 113, No. 3, pp. 590-596
DOI
|
27 |
H. Sato, K. Hishida and M. Maeda, 1992, 'Characteristics of Turbulent Flow and Heat Transfer in a Rectangular Channel With Repeated Rib Roughness,' Experimental Heat Transfer, Vol. 5, pp. 1-16
DOI
|