• 한국습지학회지
• /
• 제10권3호
• /
• pp.99-109
• /
• 2008

본 연구는 I편에서 개발된 일체형 블록시스템의 수리모형실험 결과를 검증하고 호안블록의 효과를 해석하기 위하여 수치해석을 통한 수리모형 실험을 수리특성을 모의하고자 하였다. 하도내 적용된 일체형 호안블록의 수치해석을 위하여 1차원 HEC-RAS 모형과 2차원 흐름 모의를 위하여 RMA-2 모형을 적용하여 식생전후의 수리현상을 수리모형 실험결과와 비교하여 홍수 시 유속 저감효과의 분석 및 대안으로 제시하는데 그 목적이 있다. 분석결과 2차원 수치해석 모형이 1차원 수치해석보다는 수위 유속 모두 수리모형실험결과와 근접한 결과를 나타내어 수치해석을 통한 자료구축 시 좀 더 신뢰성 있는 자료를 구축할 수 있는 것으로 판단되었다. 유속은 최저 0.21m/sec에서 최대 1.89m/sec의 저감효과를 나타내었으며, 이는 100m 당 4.89sec에서 7.33sec의 지체시간을 가져오는 것으로 분석되었다.

• Geomechanics and Engineering
• /
• 제31권1호
• /
• pp.15-30
• /
• 2022

Slope stability during the excavation of twin road tunnels is considered crucial in terms of safety. In this research, physical model testing and numerical analysis were used to investigate the characteristics of the settlement (uz) and vertical stresses (σz) along the two tunnel sections. First, two model tests for a (fill-rock) slope were conducted to study the settlement and stresses in presence and absence of slope support (plate support system). The law and value of the result were then validated by using a numerical model (FEM) based on the physical model. In addition, a finite element model with a slope supported by piles (equivalent to the plate) was used for comparison purposes. In the physical model, several rows of plates have been added to demonstrate the capacity of these plates to sustain the slope by comparing excavating twin tunnels in supported and unsupported slope, the results show that this support was effective in the upper part of the slope, while in the middle and lower part the support was limited. Additionally, the plates appear to induce less settlement in several areas of the slope with differing settlement and stress distribution as compared to piles. Furthermore, as a results of the previous mentioned investigation, there are many factors influence the stress and settlement distribution, such as the slope's cover depth, movement during excavation, buried structures such as the tunnel lining, plates or piles, and the interaction between all of these components.

• 한국ITS학회 논문지
• /
• 제11권4호
• /
• pp.51-62
• /
• 2012

Lighthill과 Whitham의 충격파모형에 따르면 동일한 속도를 유지하는 교통류 흐름상태에서도 충격파가 존재하며, 이는 라디오 전파처럼 보이지도 않고 관측할 수도 없다고 하였다. 최근의 한 논문은 이 문제에 대해 새로운 접근방법을 통해 위와 같은 모순이 어떻게 발생하였는지를 보여주었고, 이를 개선하기 위해 점근적 충격파모형 (asymptotical shock wave model) 을 제시하였다. 점근적 충격파모형은 동일한 속도로 이동하는 균일한 교통류에서 라디오 전파와 같은 관측 불가능한 충격파가 존재하지 않는 것을 증명하였다. 그러나 상기 논문은 모형의 유도와 증명에 치중하였고 모형으로서의 해석이나 구체적인 수치를 적용한 모형의 검증은 아직 실행된 적이 없다. 본 논문은 점근적 충격파모형의 내포된 의미를 해석하고, 구체적인 수치를 바탕으로 한 시나리오를 통해 모형의 성능을 시험하였다. 그 결과 점근적 충격파모형은 기존 모형에 비해 수식상의 큰 차이는 없었지만, 유일한 차이인 등식의 세 번째 항목이 모형 결과에 결정적인 차이를 나타냄을 확인하였다. 새 모형에 도입된 파라메터는 적용된 수치의 대소에 따라 그 결과가 다르게 나타났다. 이는 기존의 충격파모형에는 없는 특징으로서, 적절한 수치를 선정한다면 다양한 교통흐름에 신축적으로 모형을 적용할 수 있을 것으로 판단된다. 또한 구체적인 수치를 적용한 점근적모형의 시나리오별 시험 결과 동일한 조건에서 새로운 모형은 기존 모형에 비해 충격파가 교통류의 하류 측으로 더 진행됨을 확인하였다. 양 모형간의 이러한 차이는 통계적 유의성 검토에서도 확인되었으며, 향후 현장 자료를 적용한 추가적 비교연구가 필요한 것으로 사료된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1067-1072
• /
• 2003

Generally dual mass flywheel(DMF) is used as a solution to reduce noise and vibration of power train system and to improve the comfortability of passenger car. In this paper, design concept of new DMF model, analytical/numerical model, test procedure and tuning results are presented. Design parameters are studied by some numerical methods and tests. As the result, we can find more efficient model of DMF and reduce vibration level in power train system.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.162-168
• /
• 2000

A two-dimensional numerical model based on a finite volume method was formulated to solve the shallow water equations and applied for evaluating irrigation and drainage characteristics at large-sized paddy fields. Manning roughness coefficient was calibrated using the observed inundating depths at drainage tests and used for validating the model with the results from irrigation and drainage test. The simulated results were in good agreement with the observed inundating depths.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.625-638
• /
• 2016

This paper presents field study and numerical modeling results for a single-cell low-fill concrete box culvert under a flexible pavement subjected to traffic loading. The culvert in the field test was instrumented with displacement transducers to capture the deformations resulting from different combinations of static and traffic loads. A low-boy truck with a known axle configuration and loads was used to apply seven static load combinations and traffic loads at different speeds. Deflections under the culvert roof were measured during loading. Soil and pavement samples were obtained by drilling operation on the test site. The properties of the soil and pavement layers were determined in the laboratory. A 3-D numerical model of the culvert was developed using a finite difference program FLAC3D. Linear elastic models were used for the pavement layers and soil. The numerical results with the material properties determined in the laboratory were compared with the field test results. The observed deflections in the field test were generally smaller under moving loads than static loads. The maximum deflections measured during the static and traffic loads were 0.6 mm and 0.41 mm respectively. The deflections computed by the numerical method were in good agreement with those observed in the field test. The deflection profiles obtained from the field test and the numerical simulation suggest that the traffic load acted more like a concentrated load distributed over a limited area on the culvert. Elastic models for culverts, pavement layers, and surrounding soil are appropriate for numerical modeling of box culverts under loading for load rating purposes.

• 동력기계공학회지
• /
• 제16권4호
• /
• pp.17-23
• /
• 2012

In this study, the numerical simulation and basin model test have been performed to evaluate sea worthiness and resistance performance for a small pre-planning three type of leisure boats which are U, V, Y shapes of hull forms. As a well known commercial CFD code, Maxsurf, was applied for modeling hull forms used as the solver of motion analysis. Also the model resistance test was carried out to estimate the effective power of boat in the basin tank. Numerical simulation and model test results show that Y-shaped hull is better than the other types in terms of heave and pitch motion, having a key effect on a boat sea worthiness. But V-type hull is more efficiency than others cases in resistance performance.

• 물과 미래
• /
• 제18권4호
• /
• pp.327-333
• /
• 1985

본 연구에서는 하구역에 이안제를 설치했을 경우 하천류가 없고 파가 경사져서 입사해 올 때 하구 및 제체 주변에 발생하는 해빈류의 흐름상태를 수치계산에 의해서 구하고 고정상 수리실험을 통하여 얻은 결과와 비교해서 본 수치모델의 타당성을 검증하였다. 또한 이동상 수리실험을 통하여 하구 및 이안제 주변에서 일어나는 지형변화를 검토하여 하구폐새 방지대책으로서 이안제공법의 효용성을 확인하였다.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.87-95
• /
• 2013

The aim of this study is to examine the behavior of reservoir fill dam with the water level raising by use of the centrifugal model test and the numerical simulation. In this study, LIQCA2D-SF based on the cyclic elasto-plastic constitutive model proposed by Oka et al. (1999) is applied for numerical simulation. In order to investigate the displacements and the pore water pressures in the fill dam due to the water level raising velocity, three model tests in centrifugal field of 50g for fill dams were conducted. A comparison between the test result and the simulation result has provided the influence on the displacement and the pore water pressure of the fill dam with increasing up of the water level.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.308-316
• /
• 2016

The rubber materials are widely used in automobile industry due to their capability of a large amount of elastic deformation under a force. Current trend of design process requires prediction of functional properties of parts at early stage. The behavior of rubber material can be modeled using strain energy density function. In this study, five different strain energy density functions - Neo-Hookean model, Reduced Polynomial $2^{nd}$ model, Ogden $3^{rd}$ model, Arruda Boyce model and Van der Waals model - were used to estimate the behavior of carbon black added natural rubber under uniaxial load. Two kinds of tests - uniaxial tension test and biaxial tension test - were performed and used to correlate the coefficients of the strain energy density function. Numerical simulations were carried out using finite element analysis and compared with experimental results. Simulation revealed that Ogden $3^{rd}$ model predicted the behavior of carbon added natural rubber under uniaxial load regardless of experimental data selection for coefficient correlation. However, Reduced Polynomial $2^{nd}$, Ogden $3^{rd}$, and Van der Waals with uniaxial tension test and biaxial tension test data selected for coefficient correlation showed close estimation of behavior of biaxial tension test. Reduced Polynomial $2^{nd}$ model predicted the behavior of biaxial tension test most closely.