• 대한공간정보학회지
• /
• 제12권3호
• /
• pp.23-31
• /
• 2004

지적측량은 토지를 지적공부에 등록하거나 등록된 경계를 지표에 복원할 목적으로 각 필지의 경계 또는 좌표와 면적을 정하는 측량으로 크게 기초측량과 세부측량으로 구분되며, 세부측량은 다시 도해지적측량과 수치지적측량으로 나누어진다. 본 연구에서는 전산화사업으로 구축된 필지중심토지정보시스템(PBLIS) 자료에 의한 도해적인 평판측량과 경계점좌표에 의한 수치지적측량을 비교하여 그 정확도를 평가하였다. 그 결과 평판에 의한 도해지적측량 위치오차가 0.766m, 토털스테이션을 이용한 수치지적측량 위치오차는 0.638m로 관측되어 도해지적측량에 의한 성과보다 수치지적측량에 의한 성과가 더 정확한 것으로 분석되었으며, 향후 지적경계측량을 할 경우 PBLIS 사용 가능성을 제시하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1174-1178
• /
• 2005

In this study, flood inundations have been simulated by using the numerical model FLUMEN solving the shallow-water equations with a finite volume method. Before applying to a real problem, the numerical model is first applied to simplified problems. Obtained numerical results are verified by comparing to available analytical solutions and laboratory measurements. Reasonable agreements are observed. The model is then applied to a simulation of flood events with real geometries. The results of the present study provide basic informations for a flood inundation map.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.440-444
• /
• 1998

In this paper, we consider numerical solution of a H-J-B (Hamilton-Jacobi-Bellman) equation of elliptic type arising from the stochastic control problem. For the numerical solution of the equation, we take an approach involving contraction mapping and finite difference approximation. We choose the It(equation omitted) type stochastic differential equation as the dynamic system concerned. The numerical method of solution is validated computationally by using the constructed test case. Map of optimal controls is obtained through the numerical solution process of the equation. We also show how the method applies by taking a simple example of nonlinear spacecraft control.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.775-778
• /
• 2008

In general, forecast tsunami heights announced for tsunami warning are computed by using a linear tsunami model with coarse grids which leads the underestimation of inundation area. Thus, an accurate tsunami inundation map corresponding to the forecast tsunami height is indispensible for an emergency evacuation plan. A practical way to construct a relatively accurate tsunami inundation map was proposed in this study for the quantitative forecast of inundation area. This procedure can be introduced as in the followings: The fault dislocations of potential tsunami sources generating a specific tsunami height near an interested area are found by using a linear tsunami model. Based on these fault dislocations, maximum inundation envelops of the interested area are computed and illustrated by using nonlinear inundation numerical model. In this study, the tsunami inundation map for Imwon area was constructed according to 11 potential tsunami sources, and the validity of this process was examined.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.463-466
• /
• 2009

The numerical simulation optimized by Four Dimensional Data Assimilation (FDDA) with Quick Scatterometer (QuikSCAT) data is carried out to evaluate wind resource characteristics at various heights in the southeastern area of the Korean Peninsula, where wind farms are planned to be built on on- and off-shore as well as comparable diurnal wind variations are characterized at the surface. The temporal and spatial distributions of modeled wind speeds showed good agreement with the observations based on the temporal variation analysis. Model results indicate that the higher model is performed in resolution, the more precise results is at turbine hub height. Occasionally, wind speed variations for each numerical resolution has a different regional and seasonal variations. In the coast area, hub height wind speed of 9km-resolution is simillar to that of 3km-resolution. On the other hand, hub height wind speed of 3km-resolution is simillar to that of 1km-resolution in the Jiri mountainous area.

• 한국환경과학회지
• /
• 제24권6호
• /
• pp.807-817
• /
• 2015

In this study the urban atmospheric environment map in Busan was made and it consist of the atmospheric environment element map and the atmospheric environment analysis map. The atmospheric environment element map covered the topography, the urban climate, the air pollutant emission, ozone and PM10 concentrations in Busan and the atmospheric environment analysis map included the thermal environment and the wind flow by using WRF meteorological numerical simulation. The meteorological elements from 2007 to 2011 in Busan were used in this study. As a result, in the center of Busan and Buk-gu along to the Nakdong river was the temperature high. To analyze the air flow of Busan 3 clusters depending on the wind direction were extracted with the cluster analysis. The results of the analysis on the detailed wind field of each cluster showed that the weak ventilation could be happened locally at the specific meteorological condition.

• 한국해안·해양공학회논문집
• /
• 제22권5호
• /
• pp.287-294
• /
• 2010

본 연구에서는 지진해일 실시간 정량 대응을 위해 발생원 위치 및 지진규모에 따른 해안침수예상도 작성 방법을 제안하였으며 그 방법은 다음과 같다. 관심지역에 지진해일 피해를 발생시킬 것으로 예상되는 발생원을 선정하고 지진규모에 따른 수치모의를 수행하여 각 발생원별 지진규모별 침수예상도를 작성하는 것이다. 본 연구에서는 시범적으로 동해안 임원항을 대상으로 일본 서안에 위치한 11개의 잠재 지진해일 발생원과 7개의 지진규모에 대하여 침수예상도를 작성하였다.

• 한국환경생태학회지
• /
• 제29권1호
• /
• pp.69-80
• /
• 2015

Studies on Trapa of Korean, Japanese, and Chinese origins have been generally limited to currently living Trapa, thereby demonstrating the lack of phylogenetic approaches. In the present study, we conducted a numerical taxonomic study on 34 Korean origin Trapa species newly discovered in peat deposits. By using the numerical taxonomy as well as geological data, we created an appearance map based on the periods and taxonomic groups of the Korean Trapa. Further, by using this appearance map, we reviewed the limitations that exist in the taxa and simultaneously discussed the adaptational environment of Trapa in each period. Although other studies have discussed new variants of Trapa worldwide, including T. litwinowii V. vassil. var. chihuensis S.F.Guan & Q.Lang of China (Guan and Lang, 1987), the present study is significant because it provides data on the origin of Korean Trapa species. The availability of such data is essential in determining the adaptational environment of the presently living Trapa. To our knowledge, this is the first report of approximately 10 newly discovered and other presently living species of Trapa. Further, the appearance map in the present study allows the use of the 10 newly discovered species and variants of 34 Trapa species indigenous to South Korea for over 1000 years, for a comparison with the currently living Trapa species. Thus, the present study results could serve as important basic data to understand the adaptational environment of the genus Trapa. from the past to the present in Korea.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.68-75
• /
• 2005

This paper presents a new method for the optimization of feed rate in sculptured surface machining. A NC verification model based on Z-map was utilized to obtain chip load according to feed per tooth. This optimization method can regenerate a new NC program with respect to the commanded cutting conditions and the NC program that was generated from CAM system. The regenerated NC program has not only the same data of the ex-NC program but also the updated feed rate in every block. The new NC data can reduce the cutting time and produce precision products with almost even chip load to the feed per tooth. This method can also reduce tool chipping and make constant tool wear.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.47-56
• /
• 2003

Geometric cutting-simulation and verification play an important role in detecting NC machining errors in mold & die manufacturing and thereby reducing correcting time & cost on the shop floor. Current researches in the area may be categorized into view-based, solid-based, and discrete vector-based methods mainly depending on workpiece models. Each methodology has its own strengths and weaknesses in terms of computing speed, representation accuracy, and its ability of numerical inspection. The paper proposes a hybrid modeling scheme for workpiece representation with z-map model and discrete vector model, which performs 3-axis and 5-axis cutting-simulation via tool swept surface construction by connecting a sequence of silhouette curves.