• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3062-3067
• /
• 2007

HVOF thermal spray guns are now being widely used to produce protective coatings, on the surfaces of engineering components. HVOF technology employs a combustion process to heat the gas flow and melt the coating materials which are particles of metals, alloys or cermets. Particle flow which is accelerated to high velocities and combustion gas stream are deposited on a substrate. In order to obtain good quality coatings, the analysis of torch design must be performed. The reason is that the design parameters of torch influence gas dynamic behaviors. In this study, numerical analysis is performed to predict the gas dynamic behaviors in a HVOF thermal spray gun with various torch shapes. The CFD model is used to deduce the effect of changes in nozzle geometry on gas dynamics. Using a commercial code, FLUENT which uses Finite Volume Method and SIMPLE algorithm, governing equations have been solved for the pressure, velocity and temperature distributions in the HVOF thermal spray torch.

• 한국산업융합학회 논문집
• /
• 제10권4호
• /
• pp.221-226
• /
• 2007

Viscous flow around a front end cooling fan of the car is numerically investigated. The Navier-Stokes equations and the continuity equation are solved in the flow domain. The Reynolds stresses are modelled using the $k-{\varepsilon}$ turbulence model. The governing equations are discretized with the Finite Volume Method. The pressure and the velocity are linked with the SIMPLE algorithm. Flow and pressure characteristics around the fan are investigated. The pressure sharply increases through the fan blade. Pressure variations on the pressure and suction sides of the fan are well represened in the calculations. The flow streamlines in the blade passage are nearly parallel to the blade, but the slope of streamlines increases near the tip.

• 설비공학논문집
• /
• 제10권1호
• /
• pp.108-117
• /
• 1998

This study was performed to analyze the fluid flow characteristics and the temperature distribution of the aquarium for fish breeding. In this study, the finite volume method and turbulence k-$\varepsilon$ model with the SIMPLE computational algorithm are used to study the water flow in the aquarium. The calculation parameters are the circulating flow rate and the basin depth, and the experiments were carried out for the water flow visualization This numerical analysis gives reasonable velocity distributions in good agreement with the experimental data. As the results of the three dimmentional simulations, the sectional mean velocity increased as the sectional mean temperature increases for constant basin depth, and the mean velocity increased more rapidly for small basin depth than that of large basin depth, The mean velocity and temperature can be expressed as the function of the circulating flow rates and the basin depth.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3272-3281
• /
• 1996

The flow analysis method which had been developed for the numerical calculation of 3-dimensional, incompressible and turbulent flow within an axial compressor was extended to the flow field within centrifugal impeller. In this method based on the SIMPLE(Semi Implicit Method Pressure Linked Equations) algorithm, the coordinate transformation was adopted and the standard k-.epsilon. model using wall function was used for turbulent flow analysis. The calculated flow fields have agreed very well with measurement results. Especially, 3-dimensional and viscous flow characteristics including secondary flows, jet-wake flow and decreased pressure rise along impeller passage, which can't be predicted by inviscid Q3D calculation were predicted very reasonably.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.777-782
• /
• 2000

The flow fields in the volute casing of a small-size turbo-compressor at different flowrate (design point ${\pm}20%$) are studied by numerical analysis. The governing equations for three-dimensional steady viscous flow are solved using SIMPLE algorithm with commercial code of STAR-CD. Numerical results show that the three-dimensional flow pattern inside the volute casing of a small-size turbo-compressor is strongly influenced by secondary flows that are typically created by the curvature or the casing passages. The flow pattern in the casing also affects the performance of the turbo-compressor. In order to elucidate the loss mechanism through the volute, we prepared the secondary flow, velocity magnitude, and static pressure distribution at the four cross-sectional planes of the casing.

• 연구논문집
• /
• 통권33호
• /
• pp.123-135
• /
• 2003

Using the residence time calculated by computer simulation for temperature and gas velocity distribution in CVC reactor, the kinetics on the formation of $TiO_2$ nano powder was analyzed for coagulation process, After abrupt increase of particle size at initial growth stage (< 0.2 $\mus$ ), the particle grew in proportion of cubic root to time. The numerically calculated particle sizes well agreed with the experimental results. However, the coarse rutile $TiO_2$ powders having the particle size of over 40 nm were formed on the surface of quratz rod in the reactor. it is thought that the fine anatase particles condensed on quratz rod were sintered in a heated CVC reactor to grow and transform to coarse rutile phase, and the critical size for phase transformation anstase-to-rutile was around 25 nm tn this study.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.282-291
• /
• 2014

This paper presents a detailed theoretical analysis and performance assessment of the capacitor voltage balancing strategies for staircase modulated modular multilevel converters (MMC) in terms of the algorithm structures, voltage balancing effect, and switching frequency. A constant-frequency redundancy selection (CFRS) method with minimal switching loss is proposed and the function realization of specific modules of the algorithm is given. This method is simple and efficient in both switching frequency and regulation capacity. Laboratory results show very good agreement with the theoretical analysis and numerical simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.669-675
• /
• 1991

Based on process analysis as well as extensive operation experience, two fuzzy expert control algorithms, for startup and control, are proposed for a supercritical fluid extraction process which has high interacting multivariable structure. In the proposed algorithms, a new simple defuzzification method which only requires four fundamental arithmetic rules is also presented. Through numerical simulations, control performance using the proposed control algorithm is compared with that of a different fuzzy algorithm by an other researcher and that of conventional PID-type controllers which are tuned by well-known optimal criteria. Also, the proposed control algorithm has been tested to the bench scale supercritical fluid extraction process. As a consequence, the proposed fuzzy expert controller has shown fast and robust control performance while the other controllers show sluggish and/or highly oscillatory responses.

• 한국전산유체공학회지
• /
• 제7권1호
• /
• pp.10-19
• /
• 2002

The non-staggered(collocated) grid approach in which all the solution variables are located at the centers of control volumes is very popular for incompressible flow analyses because of its numerical efficiency on the curvilinear or unstructured grids. Rhie and Chow's paper is the first in using non-staggered grid method for SIMPLE algorithm, where pressure weighted interpolation was used to prevent decoupling of pressure and velocity. But it has been known that this non-staggered grid method has stability problems when pressure fields are nonlinear like in natural convection flows. Also Rhie-Chow scheme generates large numerical diffusion near curved walls. The cause of these unwanted problems is too large pressure damping term compared to the magnitude of face velocity. In this study the magnitude of pressure damping term of Rhie-Chow's method is limited to 1∼10% of face velocity to prevent physically unreasonable solutions. The wall pressure extrapolation which is necessary for cell-centered FVM is another source of numerical errors. Some methods are applied in a unstructured FV solver and analyzed in view of numerical accuracy. Here, two natural convection problems are solved to check the effect of the Rhie-Chow's method on numerical stability. And numerical diffusion from Rhie-Chow's method is studied by solving the inviscid flow around a circular cylinder.

• 한국지반공학회지:지반
• /
• 제1권1호
• /
• pp.5-12
• /
• 1985

압축성 흙에 대한 천밀침하의 수치해석 연구는 이제까지 Terzaghi의 정밀론을 간단히 확장하여 사용해 왔다. 그러나 비선형 응력-변형관계, 다층토, 큰 변형의 문제를 고려한 보다 복잡한 문제를 탄밀론에 적응한 예는 거의 없었다. 본 연구의 목적은 압축성 흙에서도 다층토를 중심으로 시간과 위치에 따른 추밀도와 과잉간극수압을 보다 실제적인 조건에 부합되도록 하기 위하여 유한차분법을 사용한 수치해석을 근거로 유용한 컴퓨터 알고리즘을 개발하는 데 있다. 압밀식을 해석하는 Explicit Scheme이 전체 깊이에 대한 최적분할 깊이율과 아울러 Operator의 변화에 따른 안정조건과 수고의 관점에서 연구되었다. 침하의 예측에 대해 전통적인 대석과 수식해법이 기초를 둔 개발된 알고리즘으로부터 새로운 알고리즘은 압축성 흙에 있어 전통적인 이론보다 우수한 것으로 판명되었다.