• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.173-183
• /
• 2010

Numerical analysis using a three dimensional finite element program(ABAQUS) is a powerful method which can evaluate the soil-pile-structure interaction under the dynamic loading and reduce the computation time significantly, but has not be widely used because modeling a soil-pile system and setting the parameter for the entire model are difficult and a three dimensional finite element program is not user friendly. However, a three dimensional finite element program is expected to be widely used because of advance in research of modeling technique and development of the modeling and visualization. In this study, ABAQUS is used to simulate the 1g shaking table model pile test, and the numerical results are compared with the 1g shaking table test results. The application about the soil stiffness and boundary condition change is estimated and then parametric study for various input acceleration amplitudes, various input frequencies, and various surcharge is carried out.

• 대기
• /
• 제28권2호
• /
• pp.163-174
• /
• 2018

In order to assimilate MHS satellite data into the convective scale model at KMA, ATOVS data are reprocessed to utilize the original high-resolution data. And then to improve the preprocessing experiments for cloud detection were performed and optimized to convective-scale model. The experiment which is land scattering index technique added to Observational Processing System to remove contaminated data showed the best result. The analysis fields with assimilation of MHS are verified against with ECMWF analysis fields and fit to other observations including Sonde, which shows improved results on relative humidity fields at sensitive level (850-300 hPa). As the relative humidity of upper troposphere increases, the bias and RMSE of geopotential height are decreased. This improved initial field has a very positive effect on the forecast performance of the model. According to improvement of model field, the Equitable Threat Score (ETS) of precipitation prediction of $1{\sim}20mm\;hr^{-1}$ was increased and this impact was maintained for 27 hours during experiment periods.

• 대기
• /
• 제30권4호
• /
• pp.319-333
• /
• 2020

Aircraft observations constitute one of the major sources of temperature observations which provide three-dimensional information. But it is well known that the aircraft temperature data have warm bias against sonde observation data, and therefore, the correction of aircraft temperature bias is important to improve the model performance. In this study, the algorithm of the bias correction modified from operational KMA (Korea Meteorological Administration) global model is adopted in the preprocessing of aircraft observations, and the effect of the bias correction of aircraft temperature is investigated by conducting the two experiments. The assimilation with the bias correction showed better consistency in the analysis-forecast cycle in terms of the differences between observations (radiosonde and GPSRO (Global Positioning System Radio Occultation)) and 6h forecast. This resulted in an improved forecasting skill level of the mid-level temperature and geopotential height in terms of the root-mean-square error. It was noted that the benefits of the correction of aircraft temperature bias was the upper-level temperature in the midlatitudes, and this affected various parameters (winds, geopotential height) via the model dynamics.

• Applied Science and Convergence Technology
• /
• 제24권4호
• /
• pp.102-110
• /
• 2015

Fluid model based numerical analysis is done to simulate a plasma processing system with electrodes at floating potential. $V_f$ is a function of electron temperature, electron mass and ion mass. Commercial plasma fluid simulation softwares do not provide options for floating electrode boundary value condition. We developed a user subroutine in CFD-ACE+ and compared four different cases: grounded, dielectric, zero normal electric field and floating electric potential for a 2D-CCP (capacitively coupled plasma) with a ring electrode.

• Journal of applied mathematics & informatics
• /
• 제41권1호
• /
• pp.181-192
• /
• 2023

This work deals with the numerical modeling of dam-break flow over erodible bed. The mathematical model consists of the shallow water equations, the transport diffusion and the bed morphology change equations. The system is solved by central upwind scheme. The obtained results of the resolution of dam-beak problem is presented in order to show the performance of the numerical scheme. Also a comparison of central upwind and Roe schemes is presented.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권4호
• /
• pp.59-67
• /
• 2002

분산지수는 해수침투 범위를 파악하기 위한 수리동역학적 모델링을 실행하는데 필요한 매개변수이며. 이를 현장실험으로 구하기 위해서는 많은 시간과 비용을 필요로 하기 때문에 종종 기존의 실험과 이론적 연구에서 제시된 것을 이용한다. 그러나 그 분산지수가 실제 대수층의 특성을 나타내지 못할 경우, 모델링 결과에 많은 오차가 발생할 가능성이 크다 본 연구에서는 수치모델링에서 모사된 해수침투 범위와 현장측정치 및 겉보기비저항 단면도를 비교하여 이용된 분산지수의 타당성을 검증하였다. 수치모델링 결과, Neuman의 종분산지수보다 Xu의 종분산지수를 적용한 TDS분포가 연구지역내 관측공과 모니터링 우물에서의 현장측정치와 비교하였을 때 더 유사한 값을 나타내었다. Xu의 분산지수를 이용한 수치모델링에서 해수침투 범위는 건기인 5월에는 TDS 1000mg/L 등치선이 해안에서 약 480m 지점에 위치하며, 7월에는 해안에서 약 390m 지점에 위치한다. 이 차이는 강우에 의한 수리경사의 계절적인 변화에 의해서 해수와 담수의 경계면이 7월에 약 90m 정도 해안쪽으로 더 이동하였기 때문에 나타났다. 겉보기비저항 단면도에서는 해수와 담수의 경계로서 15 ohm-m 등치선을 이용하여 해수침투 범위를 설정하였으며, 그 결과 해수침투 범위가 해안으로부터 약 450m 지점에 위치하였다. 이것은 Xu의 분산지수를 이용한 수치모델링에서 모사된 해수침투 범위와 유사한 결과이다. 따라서 수리동역학적 모델링에서 분산지수에 따라 해수침투 범위가 차이를 보이는데, 본 연구지역에서는 Xu의 공식을 이용하여 산출된 분산지수가 해수침투의 범위를 결정하는데 더 유효하였다.

• 한국환경과학회지
• /
• 제27권3호
• /
• pp.203-217
• /
• 2018

For this study, WRF numerical modeling was performed, using RDAPS information for input data on typhoons affecting the Korean peninsula to produce wind data of 700hPa. RAM numerical modeling was also used to calculate 3-second gusts as the extreme wind speed. After comparing wind speeds at an altitude of 10 m to evaluate the feasibility of WRF numerical modeling, modeled values were found to be similar with measured ones, reflecting change tendencies well. Therefore, the WRF numerical modeling results were verified. As a result of comparing and analyzing these wind speeds, as calculated through RAM numerical modeling, to evaluate applicability for disaster preparedness, change tendencies were observed to be similar between modeled and measured values. In particular, modeled values were slightly higher than measured ones, indicating applicability for the prevention of possible damage due to gales. Our analysis of 3-second gusts during the study period showed a high distribution of 3-second gusts in the southeast region of the Korean peninsula from 2002-2006. The frequency of 3-second gusts increased in the central north region of Korea as time progressed. Our analysis on the characteristics of 3-second gusts during years characterized by El $Ni{\tilde{n}}o$ or La Nina showed greater strength during hurricanes that affected the Korean peninsula in El $Ni{\tilde{n}}o$ years.

• 비파괴검사학회지
• /
• 제20권2호
• /
• pp.116-129
• /
• 2000

초음파검사에서 발생하는 물리적 현상의 복잡성을 고려할 때, 이를 이론적으로 모델링하기 위해 수치적인 기법을 이용하는 것이 효과적인 경우가 많다. 본 논문에서는 초음파검사를 수치적으로 모델링하는 기법들에 대하여 개괄적으로 살펴보고, 특히 유한차분법과 유한요소법에 대하여 상세히 알아본다. 즉, 유한차분법과 유한요소법을 이용한 해석의 개요를 설명하고, 이들의 적용시 고려사항 및 문제점에 대해 알아 본 후, 기존의 연구결과 중 중요한 것들을 참고문헌으로 열거하고 몇 가지 예를 소개한다. 계속되는 컴퓨터의 기술적 발전으로 인하여 초음파검사에 대한 수치적 모델링 기법의 신뢰성과 편의성이 지속적으로 증대될 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.33-42
• /
• 2016

Spacer grids play an important role in maintaining the proper form of the fuel assembly structure and ensuring the safety of reactor core design. This study applies the Monte Carlo method to the analysis of the neutronics effects of spacer grids in a typical pressurized water reactor (PWR). The core problem used to analyze the neutronics effects of spacer grids is a modified version of Korea Advanced Institute of Science and Technology benchmark problem 1B, based on an Advanced Power Reactor 1400 (APR1400) core model. The spacer grids are modeled and added to this test problem in various ways. Then, by running MCNP5 for all cases of spacer grid modeling, some important numerical results, such as the effective multiplication factor, the spatial distributions of neutron flux, and its energy spectrum are obtained. The numerical results of each case of spacer grid modeling are analyzed and compared to assess which type has more advantages in accuracy of numerical results and effectiveness in terms of geometry building. The conclusion is that the most realistic modeling for Monte Carlo calculation is the "volume-preserving" streamlined heterogeneous spacer grids, but the "banded" dissolution spacer grids modeling is a more practical yet accurate model for routine (deterministic) analysis.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.808-812
• /
• 2010

This paper studies the finite element modeling and analytical parameters for the numerical evaluation of dynamic stiffness of large foundation for shipboard equipments such as marine diesel engine. For the purpose, numerical method and procedure to evaluate the dynamic stiffness are established based on the impact test method, which are applied for the dynamic stiffness evaluation of a real diesel generator foundation of ship. Numerical investigations compared with the measured data are carried out to evaluate the effects of modeling ranges of ship substructure, finite element sizes, lower support structures and damping coefficients. From the results, modeling and analytical parameters for proper evaluation of dynamic stiffness of large foundation of shipboard equipment are suggested.