• 제목/요약/키워드: Numerical Analysis Model

검색결과 7,870건 처리시간 0.032초

Analysis of Numerical Model Wave Predictions for Coastal Waters at Gunsan-Janghang Harbor Entrance

  • Lee Joong-Woo;Lee Hak-Seung;Lee Hoon;Jeon Min-Su;Kim Kang-Min
    • 한국항해항만학회지
    • /
    • 제29권7호
    • /
    • pp.627-634
    • /
    • 2005
  • Gunsan-Janghang Harbor is located at the mouth of Gum River, on the central west coast of Korea The harbor and coastal boundaries are protected from the effects of the open ocean by natural coastal islands and shoals due to depositions from the river, and two breakwaters. The navigation channel commences at the gap formed by the outer breakwater and extends through a bay via a long channel formed by an isolated jetty. For better understanding and analysis of wave transformation process where a wide coastline changes appear due to on-going reclamation works, we applied the spectral wave model including wind effect to the related site, together with the energy balance models. This paper summarizes comparisons of coastal responses predicted by several numerical wave predictions obtained at the coastal waters near Gunsan-Janghang Harbor. Field and numerical model investigations were initially conducted for the original navigation channel management project. We hope to contribute from this study that coastal engineers are able to use safety the numerical models in the area of port and navigational channel design.

Boussinesq 방정식을 이용한 규칙파의 연파해석 (Stem Wave Analysis of Regular Waves using a Boussinesq Equation)

  • 이종인;김영택;윤성범
    • 한국해안해양공학회지
    • /
    • 제19권5호
    • /
    • pp.446-456
    • /
    • 2007
  • 본 연구에서는 Lynett and Liu(2004a, b)에 의해 유도된 2층 Boussineaq방정식을 이용하여 일정수심상의 규칙파 조건에서 직립벽을 따른 연파를 해석하고, 수리모형실험결과 및 포물형근사식에 의한 해석결과와 비교하였다. 두 가지 수치모형에 의한 해석결과는 수리실험결과와 비교적 잘 일치하였으나, 입사각이 증가할수록 Boussinesq 모형이 포물형모형보다 우수한 결과를 주는 것으로 나타났다. 특히 파랑의 비선형성에 의한 고차 조화성분의 발생은 Boussinesq모형에서만 관찰되었다.

다자유도 곡선맞춤법을 이용한 감쇠보 모델의 실험 진동해석 (Experimental Vibration Analysis of Damped Beam Model Using Multi-degree Curve Fitting Method)

  • 민천홍;배수룡;박한일
    • 한국해양공학회지
    • /
    • 제22권1호
    • /
    • pp.70-74
    • /
    • 2008
  • It is important to reduce the vibration and noise of submarines and ships. For the purpose of noise reduction, various researches are actively being conducted on the employment of complex structures. However, in the case of numerical analysis for complex structures with damping materials, substantial errors can be generated by the absence of an exact damping model. Thus experimental model analysis is necessary for the verification of a numerical analysis for complex structures. In this research, vibration experiments are conducted in order to ascertain the vibration properties of cantilever beam attached damping materials. First, an initial value is obtained by using a direct linear method. Next, based on this initial value, the exact modal parameters of the cantilever beam are obtained by using the Newton-Raphson method.

Sub-surface Stress Analysis on Spur Gear Teeth in the EHL Conditions

  • Koo, Young-Pil;Kim, Tae-Wan;Cho, Yong-Joo
    • KSTLE International Journal
    • /
    • 제5권1호
    • /
    • pp.14-22
    • /
    • 2004
  • The sub-surface stress field beneath the gear's contact surface caused by the surface pressure in lubricated condition is analyzed. To evaluate the influence of the clearances between a gear tooth and a pinion tooth on the stress field, two kinds of tooth profile models - conventional cylinder contact model and new numerical model - were chosen. Kinematics of the gear is taken into account to obtain the numerical model which is the accurate geometric clearances between a gear tooth and a pinion tooth. Transient elasto-hydrodynamic lubrication (EHL) analysis is performed to get the surface pressure. The sub-stress field is obtained by using Love's rectangular patch solution. The analysis results show that the sub-surface stress is quite dependent on both the surface pressures and the profile models. The maximum effective stress of the new model is lower than that of the old model. The depth where the maximum effective stress occurs in the new model is not proportional to the intensity of the external load.

건설차량용 변속장치의 특성 해석 (Shift Characteristics Analysis of Transmission for Construction Vehicles)

  • 윤소남;함영복;류찬수;최병오
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.674-679
    • /
    • 2002
  • As the object of this study, a transmission system with the style of HST in combination with mechanical semi-automatic transmission for application in hydraulic wheel excavators was chosen. The dynamic characteristics of the object transmission was studied by numerical analysis of the mathematical model. The results of numerical analysis showed comparatively good agreements with experimental results, so the validity of the numerical analysis process was ascertained.

  • PDF

FLOW-3D를 이용한 우이천의 홍수특성 분석 (Analysis of the flood Characteristics in the Woo-Ee Stream Using FLOW-3D)

  • 윤선권;문영일;김종석;오근택;이수곤
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2007년도 정기총회 및 학술발표대회
    • /
    • pp.603-607
    • /
    • 2007
  • Recently, the frequency of unexpecting heavy rains has been increased due to abnormal climate and extreme rainfall. There was a limit to analyze one dimension or two dimension stream flow of domestic rivers that was applied simple momentum equation and fixed energy conservation. Therefore, hydrodynamics flow analysis in rivers has been needed three dimensional numerical analysis for correct stream flow interpolation. In this study, CFD model on FLOW-3D was applied to stream flow analysis, which solves three dimension RANS(Reynolds Averaged Navier-Stokes Equation) control equation to find out physical behavior and the effect of hydraulic structures. Numerical simulation accomplished those results was compared by using turbulence models such as $k-{\backepsilon}$, RNG $k-{\backepsilon}$ and LES. Those numerical analysis results have been illustrated to bends and junctions by the turbulence energy effects, velocity of flow distributions, water level pressure distributions and eddy flows.

  • PDF

아파트주택에 있어서 실내공기청정기에 의한 환기의 수치해석 (A Numerical Analysis on Forced Ventilation using Indoor Air Cleaner in an Apartment House)

  • 고재윤;김일겸;최병훈;임장순
    • 설비공학논문집
    • /
    • 제13권3호
    • /
    • pp.217-223
    • /
    • 2001
  • There exist a number of approaches which can evaluate ventilation and indoor air quality. The measurement and analysis of indoor carbon dioxide concentrations can be useful for evaluating indoor air quality and ventilation. This paper describes a numerical analysis of carbon dioxide concentrations for evaluating indoor air quality and ventilation and the factors the need to be considered in their use. The conditions of this numerical analysis are tow types of positions and inlet velocities of ventilation system in a two-dimensional model of an apartment house. The simulation results could be used as a base data for further analysis for ventilation design of other industrial processes producing a proper ventilation system for a healthier and more comfortable environment in a building.

  • PDF

일체형 식생호안블록 시스템 개발 및 수리특성 연구(II) -일체형 호안블록시스템 수치모의를 통한 효과 분석- (Development and Hydraulic Characteristics of Continuous Block System in River Bank Protection (II) - Comparison of Numerical Analysis with Physical Modeling -)

  • 장석환
    • 한국습지학회지
    • /
    • 제10권3호
    • /
    • pp.99-109
    • /
    • 2008
  • 본 연구는 I편에서 개발된 일체형 블록시스템의 수리모형실험 결과를 검증하고 호안블록의 효과를 해석하기 위하여 수치해석을 통한 수리모형 실험을 수리특성을 모의하고자 하였다. 하도내 적용된 일체형 호안블록의 수치해석을 위하여 1차원 HEC-RAS 모형과 2차원 흐름 모의를 위하여 RMA-2 모형을 적용하여 식생전후의 수리현상을 수리모형 실험결과와 비교하여 홍수 시 유속 저감효과의 분석 및 대안으로 제시하는데 그 목적이 있다. 분석결과 2차원 수치해석 모형이 1차원 수치해석보다는 수위 유속 모두 수리모형실험결과와 근접한 결과를 나타내어 수치해석을 통한 자료구축 시 좀 더 신뢰성 있는 자료를 구축할 수 있는 것으로 판단되었다. 유속은 최저 0.21m/sec에서 최대 1.89m/sec의 저감효과를 나타내었으며, 이는 100m 당 4.89sec에서 7.33sec의 지체시간을 가져오는 것으로 분석되었다.

  • PDF

수정 Lagrangian model을 이용한 선회 비 예혼합 화염에 대한 수치적 연구 (Numerical Analysis for a Swirling Confined Non-Premixed Flame with Modified Lagrangian model)

  • 민병혁;김호영;정진택
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.113-122
    • /
    • 2002
  • The purpose of this study is to verify that the modified Lagrangian model can predict temperature, flow and scalar fields in the high temperature recirculation region of swirling confined diffusion flame. In the meantime numerical results from EBU and Equilibrium PDF models as well as experimental results are compared with those from the modified Lagrangian model. Adaption of three different turbulent models were accompanied with this procedure. Look-up table of the ignition characteristic time scale which is one of important factors of the Lagrangian model was referred to the 11-step reduced mechanism. Eventually, results with the Lagrangian model show a good accordance with experimental results, which shows the validity of this model. Results from Chen's model differ from those of the others. Numerical results of ${\widetilde{k}$ show significant deviation from experimental results for three models.

  • PDF

2차원 모형실험 및 수치해석을 통한 현수교 터널식 앵커리지의 인발거동 특성 분석 (Analysis of Pull-out Behavior of Tunnel-type Anchorage for Suspended Bridge Using 2-D Model Tests and Numerical Analysis)

  • 서승환;박재현;이성준;정문경
    • 한국지반공학회논문집
    • /
    • 제34권10호
    • /
    • pp.61-74
    • /
    • 2018
  • 본 연구에서는 케이블 인발하중이 작용하는 현수교의 앵커리지 종류 중 터널식 앵커리지의 인발거동 특성을 축소모형실험과 수치해석을 통하여 분석하였다. 터널식 앵커리지는 국내외 적용사례가 적고 파괴형태 및 안전율 등 설계기법이 명확히 정립되어 있지 않아 설계기법 개선과 관련한 연구가 필요한 실정이다. 이에 국내 최초로 터널식 앵커리지가 적용된 울산대교를 대상으로 형상 및 구조를 단순화하여 축소모형실험을 수행하였다. 모형실험에서 앵커리지 구체와 주변 암반을 석고혼합물로 구현하였고, 평면 변형률 조건에서 인발 거동 특성을 조사하였다. 모형실험결과 터널식 앵커리지의 최종 인발 파괴모드는 울산대교의 설계시 가정한 바와 달리 쐐기(wedge)형태로 나타났다. 이를 검증하기 위해 유한요소해석 프로그램인 ABAQUS를 사용하여 수치해석을 시행하였고, 모형실험결과와 동일한 인발 파괴 거동을 확인할 수 있었다. 수치해석에서는 추가적으로 모형재료의 포아송비 및 주변암반의 강도 변화에 따른 영향을 조사하였다. 그 결과 극한 인발상태까지는 포아송비에 따른 영향이 적은 것으로 나타났고, 주변암반의 강도가 앵커리지 구체의 강도보다 10배 이상 큰 특수한 경우에 한하여 앵커리지가 주변 암반의 경계면을 따라 빠져나오는 소위 플러그(plug)형태의 파괴모드가 발생할 수 있음을 확인하였다.