• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.51-57
• /
• 2007

Present study aimed to investigate the radioprotective effects of propolis feeding on rat tissues damaged by X-ray irradiation. It was shown that the number of white blood cell in X-ray irradiated group supplemented with propolis increased as much to those of the control group and also the GOT activities among the blood components were decreased after propolis feeding. The mineral contents such as Mg, Fe, Ca, Mn, Cu, Mo, Ni, As in liver were increased as compared with those of the control group but maintained lower level than those of only irradiated groups, implying that the propolis feeding elevated the recovery capability of white blood cell effectively and propolis have a potential resistance to cell damage by X-ray. According to histological observations of the testis, intestine and liver tissues which are irradiated after feeding propolis, the numbers of damaged undifferentiated cells were decreased in testis and the shape of the goblet cells and inner and outer muscular layers in intestine were restored to the original state and the hepatocytes and interlobular veins were shown intact in liver, suggesting that propolis has a potential capacity to restore cell shapes or resist deformation of cell.

• Korean Journal of Plant Resources
• /
• v.16 no.1
• /
• pp.89-98
• /
• 2003

Pollens of six taxa in the genus Atractytis L. confused with Atractylodes DC. were investigated by the light and the scanning electron microscope. Pollen grains of six taxa in this genus were monads, 46.5-66.7$\mu\textrm{m}$ in length of polar axis, 43.6-60.47$\mu\textrm{m}$ in equatorial width. Aperture was tri-colporate, 19.6-29.1 $\mu\textrm{m}$ in colpus length,7.3-11.0$\mu\textrm{m}$ in colpus width and 6.4-10.6$\mu\textrm{m}$ in porus diameter. The exine was composed of three layers(foot layer, columellne, tectum), and 5.2-8.3 $\mu\textrm{m}$ in thickness. The surface sculpturing pattern was echinate, the spines were 1.4-5.8$\mu\textrm{m}$ in length and 6-33 per 20$\mu\textrm{m}$$^2$ in distribution numbers over the surface. Atractylis L. was not distinguished from Atractylodes DC. by pollen morphology, especially the pollens of Atractylis arabica, A. aristata, A. carduus, A. microcephala were very similar to that of Atractylodes. But its taxonomic significance was different, the taxa of Atractylodes DC. were divided into 2 types by only pollen size, but the treated taxa in this study were divided into various types by pollen size, shape of equatorial view, surface sculpturing and spine size. The characteristics of spine size and shape of equatorial view in A. cancellata and A. prolifera were very useful for consideration of evolutionary trends in this genus.

• KSBB Journal
• /
• v.23 no.3
• /
• pp.263-270
• /
• 2008

A poly-(dimethylsiloxane) (PDMS) surface modified by the successive deposition of the polyelectrolytes, poly-(allylamine hydrochloride) (PAH), poly-(diallyldimethylammoniumchloride) (PDAC), poly-(4-ammonium styrenesulfonic acid) (PSS), and poly-(acrylic acid) (PAA), was presented for the application of selective cell immobilization. It is formed via electrostatic attraction between adjacent layers of opposite charge. The modified PDMS surface was examined using static contact angle measurements and fourier transform infrared (FT-IR) spectrophotometer. The wettability of the PDMS surface could be easily controlled and functionalized to be biocompatible through regulation of layer numbers. The modified PDMS surface provides appropriate environment for adhesion to cells, which is essential technology for cell patterning with high yield and viability in the patterning process. This method is reproducible, convenient, and rapid. It could be applied to the fabrication of biological sensing, patterning, microelectronics devices, screening system, and study of cell-surface interaction.

• The Korean Journal of Ecology
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2000

The pattern of gap regeneration and vegetational changes were carried out in gaps with different ages and in an intact forest in a Quercus mongolica (mongolian oak) stand located at Munsubong of Mt. Worak. In the early stage of gap formation, Lespedeza maximowiczii, Fraxinus rhynchophylla, Tripterygium regelii, Quercus mongolica, and Stephanadra incisa were dominants in shrub layers. The numbers of shrubs with smaller diameters at ground surface were abundant in the early stage of gap formation. On the other hand, as gap age increased, the number of individuals of Quercus mongolica and Fraxinus rhynchophylla forming tall tree layer decreased. However the diameter at ground surface of Quercus mongolica and Fraxinus rhynchophylla increased. There were few young Quercus mongolica, but those over 130 years old appeared in mature Quercus mongolica stands. The last regeneration episode ended about 130 years ago and the new one started 40 years ago in this study site. Considering the presence of Quercus mongolica below 40 years old in gap and the absence of Quercus mongolica from 40 to 130 years old in closed stand, it is concluded that Quercus mongilica forest is maintained by discontinued regeneration.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.4
• /
• pp.125-132
• /
• 2021

As the layers of artificial neural network deepens, and the dimension of data used as an input increases, there is a problem of high arithmetic operation requiring a lot of arithmetic operation at a high speed in the learning and recognition of the neural network (NN). Thus, this study proposes a data dimensionality reduction method to reduce the dimension of the input data in the NN. The proposed Line-segment Feature Analysis (LFA) algorithm applies a gradient-based edge detection algorithm using median filters to analyze the line-segment features of the objects existing in an image. Concerning the extracted edge image, the eigenvalues corresponding to eight kinds of line-segment are calculated, using 3×3 or 5×5-sized detection filters consisting of the coefficient values, including [0, 1, 2, 4, 8, 16, 32, 64, and 128]. Two one-dimensional 256-sized data are produced, accumulating the same response values from the eigenvalue calculated with each detection filter, and the two data elements are added up. Two LFA256 data are merged to produce 512-sized LAF512 data. For the performance evaluation of the proposed LFA algorithm to reduce the data dimension for the recognition of handwritten numbers, as a result of a comparative experiment, using the PCA technique and AlexNet model, LFA256 and LFA512 showed a recognition performance respectively of 98.7% and 99%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.3
• /
• pp.42-51
• /
• 1981

Boron was predeposited into p (100) Si wafer at 94$0^{\circ}C$ for 60minutes to make the back surface field. High tempreature diffusion process at 1145$^{\circ}C$ for 3 hours was immediately followed without removing boron glass to obtain high surface concentration Back boron was annealed at 110$0^{\circ}C$ for 40minutes after boron glass was removed. N+ layer was formed by predepositing with POCI3 source at 90$0^{\circ}C$ for 7~15 minutes and annealed at 80$0^{\circ}C$ for 60min1es under dry Of ambient. The triple metal layers were made by evaporating Ti, Pd, Ag in that order onto front and back of diffused wafer to form the front grid and back electrode respectively. Silver was electroplated on front and back to increase the metal thickness form 1~2$\mu$m to 3~4$\mu$m and the metal electrodes are alloyed in N2 /H2 ambient at 55$0^{\circ}C$ and followed by silicon nitride antireflection film deposition process. Under artificial illumination of 100mW/$\textrm{cm}^2$ fabricated N+PP+ cells showed typically the open circuit voltage of 0.59V and short circuit current of 103 mA with fill factor of 0.80 from the whole cell area of 3.36$\textrm{cm}^2$. These numbers can be used to get the actual total area(active area) conversion efficiency of 14.4%(16.2%) which has been improved from the provious N+P cell with 11% total area efficiency by adding P+ back.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.96-106
• /
• 2014

Previous academic research on FPGA tools has relied on simple imaginary models for the targeting architecture. As the first step to overcome such restriction, the issues on analytic placement and legalization which are applied to commercial FPGAs have been brought up, and several techniques to remedy them are presented, and evaluated. First of all, the center of gravity of the placed cells may be far displaced from the center of the chip during analytic placement. A function is proposed to be added to the objective function for minimizing this displacement. And then, the density map is expanded into multiple layers to accurately calculate the density distribution for each of the cell types. Early fixation is also proposed for the memory blocks which can be placed at limited sites in small numbers. Since two flip-flops share control pins in a slice, a compatibility constraint is introduced during legalization. Pre-packing compatible flip-flops is proposed as a proactive step. The proposed techniques are implemented on the K-FPGA fabric evaluation framework in which commercial architectures can be precisely modeled, and modified for enhancement, and validated on twelve industrial strength examples. The placement results show that the proposed techniques have reduced the wire length by 22%, and the slice usage by 5% on average. This research is expected to be a development basis of the optimization CAD tools for new as well as the state-of-the-art FPGA architectures.

• Ocean and Polar Research
• /
• v.23 no.2
• /
• pp.109-119
• /
• 2001

Meiobenthic community structure of tidal flats near the Yeonggwang Nuclear Power Plant have studied during summer (June) and fall (October) 1997. Examination of sediment samples collected along the transects showed that there were 18 different types of meiobenthos in the study area. The most abundant meiobenthic animals belonged to Phylum Nematoda in both seasons and all transects. However, sediment samples collected near discharge areas, transects A and B, showed relatively lower abundance than other general coastal areas. Another abundant meiobenthic organism is benthic Harpacticoids which is very sensitive to any environmental changes. Polycheats and Ostracods were next abundant meiobenthos which also showed the difference between the study area and other general coastal areas. Only transect C maintained similar meiobenthic abundance and diversity to other coastal areas. Horizontal distribution for transects A and B showed higher densities in upper and mid tidal flat zones. On the other hand, transect C which is located furtherest from the discharges showed an increasing trend in abundance from upper to lower areas. For size distribution analyses showed that animals which fit into the meshsize of 0.125 mm were abundant, Vertical distribution of meiobenthic animals within the sediments for both sampling seasons showed the highest individual numbers in the surface sediment layers of 0-1 cm depth and showed a decreasing trend as sediment gets deeper. Each class of meiobenthos had different vertical profiles. When comparing survey transects A and B with other similar tidal flat areas, this sites seems to a very unstable environment of tidal flats near the Yeonggwang Nuclear Power Plant.

• Geophysics and Geophysical Exploration
• /
• v.6 no.3
• /
• pp.119-125
• /
• 2003

The small-loop electromagnetic (EM) technique has been used successfully for many geophysical investigations, particularly for shallow engineering and environmental surveys. In conventional small loop EM operating at small induction numbers, geometric sounding has been widely used because the depth of penetration of EM energy depends only on the source-receiver separation. Recently developed small loop EM system, however, measures the secondary magnetic field, $H^S$, at multiple frequencies with a fixed source-receiver separation and frequency sounding is tried actively. In this study, we analyzed the behavior of in-phase and quadrature components of ${H^S}_z$, for horizonal coplanar (HCP) configuration over two-layer models. Through this theoretical analysis, it was found that the in-phase component of ${H^S}_z$ is more suitable for frequency sounding than the quadrature component. But, the in-phase component of ${H^S}_z$ is too small to measure, especially in resistive and noisy environment like Korea. Using the fact that the quadrature component is much greater than the in-phase component and the difference of quadrature component of ${H^S}_z$ measured at two frequencies shows the same behavoir as the in-phase component, we suggested an alternative frequency sounding technique. Also, we defined an apparent conductivity, which reflects well the conductivity of subsurface layers.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.692-700
• /
• 2016

The objective of this study was to determine the differences in fruit growth, fruit quality, and particularly the pedicel vascular bundles of 'Shigyoku' and 'Heukboseok' grapes, which appeared to be different in softening at harvest. 'Shigyoku' grape matured faster (by about 20 days) than 'Heukboseok' grape with slight fruit enlargement after veraison. However, fruit of 'Heukboseok' grapes showed remarkable enlargement in both the primary and secondary fruit enlargement periods. Hypodermal cell layers were not different after veraison in 'Shigyoku' grape, but degradation of the hypodermis cell wall continued in 'Heukboseok' grape, resulting in a gradual decline in firmness. The numbers of hypodermal cell layers in 'Shigyoku' and 'Heukboseok' grapes were 14.2 and 9.0, respectively. The average content of soluble solids in 'Shigyoku' grape ($19.5^{\circ}Brix$) was significantly ($p{\leq}0.01$) higher than that of 'Heukboseok' grape ($17.0^{\circ}Brix$). Xylem of the pedicel did not differ between the two varieties. However, average phloem area after veraison of 'Shigyoku' grape ($19044.8{\mu}m^2$) was about 1.8 fold greater than that of 'Heukboseok' grape ($10509.4{\mu}m^2$), based on the number of cells constituting the phloem. The cell number and area of the phloem might affect the accumulation of sugars, the main constituents of the cell wall, thus maintaining the firmness of grapes until late maturity. Therefore, the increased softening of 'Heukboseok' grapes at harvest might due to their phloem structure.