• Journal of Environmental Health Sciences
• /
• v.38 no.1
• /
• pp.51-56
• /
• 2012

Objectives: High concentrations of airborne particulate matters (PM) can affect the health of passengers using public transportation. The objectives of this research were to develop a PM control system for a railway cabin and to evaluate the performance of the device under conditions of an actual journey. Methods: This study measured the concentrations of $PM_{10}$ and $PM_{2.5}$ simultaneously in a reference cabin and a cabin with the PM control device. Results: The average $PM_{10}$ concentration in the reference cabin was 100 ${\mu}g/m^3$, and the $PM_{10}$ concentration in the cabin with the control device was 79 ${\mu}g/m^3$. While the overall control efficiency of the control device was 15.4%, reduction was more effective for peak $PM_{10}$ concentration. However, $PM_{2.5}$ levels did not differ greatly between the reference cabin and the cabin with the control device. The ratio of $PM_{2.5}$ to $PM_{10}$ was 0.37. $PM_{10}$ concentrations in cabins were not associated with ambient concentrations, indicating that the main sources of $PM_{10}$ were present in cabins. Additionally, average $CO_2$ concentration in the cabins was 1,359 ppm, less than the maximum of 2,000 ppm set out by the Korean Ministry of Environment's guideline. The $CO_2$ concentration in cabins was significantly associated with the number of passengers: the in-cabin concentration = $23.4{\times}N+460.2$, where N is the number of passengers. Conclusions: Application of the PM control device can improve $PM_{10}$ concentration, especially at peak levels but not $PM_{2.5}$ concentration.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2012

There are ATC (Automatic Train Control), ATP (Automatic Train Protection), ATS (Automatic Train Stop) and ATO (Automatic Train Operation) etc. in train control systems. As various train control systems are installed according to sections, on-board signaling systems are installed to apply to the section. Hence, operation flexibility of trains is decreased. In other words, when trains are operated in the section where other train control systems are used, the on-board signaling systems are changed. Recently, a study on the combined on-board signaling system has been researched to solve this problem. The combined on-board signaling system consists of ATC, ATP and ATS device. Because the train control systems are vital, it needs to design the combined on-board signaling system by using k out of n system. In this paper, when k out of n system is applied in the combined on-board signaling system, the reliability and loss cost are analyzed by using failure rate in each device. Hence, the ideal number of systems is presented according to the number of outputs.

• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.115-125
• /
• 2005

The line planning problem is to determine the origin and destination stations of the lines with their frequencies so as to meet the OD demands. Since the advent of high speed trains, Korea railway is confronted with the urgent difficulty to reconstruct the line configuration with the frequencies of each line and each fleet type so the demands could be newly created as well as satisfied. Furthermore. the existing trains except the high speed trains suffer from a longer traveling time than before. Now, to reduce the passenger traveling time, the trains with the various halting patterns are run in the same line. Therefore, it is necessary to develop a new line planning model to consider the various halting patterns. Most of studies find the frequencies of each lines which meet the link traffic loads or minimum link frequencies. But these are based on the assumption of all stop patterns. Furthermore, it is not easy to include the actual constraints as like the minimum number of stops at a station, the maximum number of stops or a train, etc. We develop the line planning model considering not only the various halting patterns but also the actual constraints which is based on the multicommodity network flow model with the additional constraints.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.206-216
• /
• 2020

As the number of aging railway bridges in Korea increases, maintenance costs due to aging are increasing and continuous management is becoming more important. However, while the number of old facilities to be managed increases, there is a shortage of professional personnel capable of inspecting and diagnosing these old facilities. To solve these problems, this study presents an improved model that can detect Local damage to structures using machine learning techniques of AI technology. To construct a damage detection machine learning model, an analysis model of the bridge was set by referring to the design drawing of a non-ballasted plate-girder railroad bridge. Static strain data according to the damage scenario was extracted with the analysis model, and the Local damage index based on the reliability of the bridge was presented using statistical techniques. Damage was performed in a three-step process of identifying the damage existence, the damage location, and the damage severity. In the estimation of the damage severity, a linear regression model was additionally considered to detect random damage. Finally, the random damage location was estimated and verified using a machine learning-based damage detection classification learning model and a regression model.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.833-843
• /
• 2016

Recently, in the field of rail freight transportation, the number of trains dedicated for shippers has been increasing. These dedicated trains, which run on the basis of a contract with shippers, had been restricted to the transportation of containers, or so called block trains. Nowadays, such commodities have extended to cement, hard coal, etc. Most full freight cars are transported by dedicated trains. But, for empty car distribution, the efficiency still remains questionable because the distribution plan is manually developed by dispatchers. In this study, we investigated distribution models delineated in the KTOCS system which was developed by KORAIL as well as mathematical models considered in the state-of-the-art. The models are based on optimization models, especially the network flow model. Here we suggest a new optimization model with a framework of the column generation approach. The master problem can be formulated into a transportation problem with additional constraints. The master problem is improved by adding a new edge between the supply node and the demand node; this edge can be found using a simple shorted path in the time-space network. Finally, we applied our algorithm to the Korean freight train network and were able to find the total number of empty car kilometers decreased.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.193-208
• /
• 2008

This study aims to analyse the ripple effect of Physical distribution service industry on national economy using input-output tables and present the results as data for political plans in this field. For the analysis, it uses input-output tables developed and published by Sank of Korea in 1998, 2000, and 2003. To sum up the results, production inducement effects are 1757 for railroad transport, 1688 for road transport and 1617 for loading. Import inducement effects of assistant services, loading, storage, warehouse and other transport-related services are low while the effects of water and air transport are high as follows: 0.679 and 0.558 respectively. Then, added-value inducement effects are presented as follows: 0.841 for railway transport, 0.828 for road transport, 0.962 for transport assistant service, 0.939 for loading, 0.938 for storage and warehouse, and 0.942 for other transport-related services. Sensitivity dispersion index of road transport is high while that of water transport, storage and warehouse is low. And influence coefficient of railway and road transport is high while that of water and air transport is low. In respect to the employment structure of Physical distribution service industry, 744,000 are employed for road transport industry, which is the largest number, 19,000 for air transport and 20,000 for assistant services, which is the least number.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.353-362
• /
• 2023

In this research, the usage status and characteristics of user big data of Mobike, a dockless bike sharing service introduced in Suwon city, were analyzed, and multiple regression analysis was performed to identify factors influencing the demand for dockless bike sharing service. For analysis, usage data of bike sharing system in Suwon city in 2019 were obtained, and they were organized by areas. As a result of analyzing the characteristics of the influencing factors selected for each area, it was found that the extension of bicycle roads shows high in areas with high demand for bicycles or adjacent areas. Also, the population of 10-30's shows high in areas with high demand for bicycles or adjacent areas. In addition, it was analyzed that the use of bike sharing system is high in areas with high maintenance rate of bicycle roads and large-scale residential and commercial facilities near residential districts and adjacent areas. As a result of the multiple regression analysis, it is analyzed that length of bicycle·pedestrian roads (non-separated), population of 10-30's, number of railway stations, number of schools, number of commercial facilities, number of industrial facilities factors were significant. It is expected that it may be possible to create an environment in which citizens want to use dockless bike sharing service by identifying factors affecting the number of stationless shared bicycles. Also, the results of data analysis are considered to be contributing to policy data to promote the use of dockless bike sharing.

• Geomechanics and Engineering
• /
• v.20 no.3
• /
• pp.255-265
• /
• 2020

Laboratory tests are conducted to investigate the performance of retaining system with different combinations of long-short piles. Numerical analysis implemented using ABAQUS are verified by comparing numerical results with measured data. By performing numerical studies, the horizontal displacement of piles, heave of excavation bottom and bending moment of pile for various pile system with different pile lengths are investigated. Results show that long piles share higher bending moments than short piles. The increase in the number of short piles leads to a slight increase in the heave at excavation bottom for long-short pile retaining system. Retaining system with different long and short pile combinations have greater effects on the horizontal displacement of pile above the excavation bottom, compared to its counterparts below excavation bottom. For a given length of long pile, the bending moment and displacement of piles increase with the decrease in length of short piles, while the increasing rate of maximum moment of retaining pile system is insignificant. Results highlight that a reliable and economical pile retaining system can be designed by optimizing the number and length of short piles, provided that the working performance of retaining structures above excavation bottom meets the design requirement in practice.

• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.28-37
• /
• 2019

Various fields are being combined and developed for the development of the country and industry. The purpose of this study is to examine the effects of interdisciplinary research on the technology commercialization of researchers in the national R&D project. For the purpose of empirical analysis, major research and development have been reviewed. Major research and development projects conducted by government-funded research institution in which various technological fields are integrated in order to commercialize technology. The research data is based on the major R&D project data for railway/public transportation/logistics fields technology in 2015-17, and 149 project were selected for analysis. As a result, it was found that diversity of participants' experts had significant positive effect on technology commercialization when R&D expense, The number of research participants, The number of participating organizations, TRL before R&D were controlled. It is expected that the results of this study will be used meaningfully when the R&D program plan, analysing the academic convergence factor of research topic.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1309-1316
• /
• 2018

Cattle estrus detection system based on Internet of Things is designed and implemented by using Arduino pro-mini, gyroscope, acceleration sensor, bluetooth master and slave module. The implemented system measures cattle's moving and the measured data are transmitted to the computer connected to RX module by bluetooth TX module. They are plotted in 2-dimensional graph on the computer monitor and the number of transition at each sensor axis are calculated from the graph. The detected and gathered data from the system are analyzed by the proposed algorithm to decide which cows are in the estrus or not. The method to apply bluetooth scatternet is shown and the proposed system can be used to increase the success rate of artificial insemination in normal estrus by detecting the cow's behaviors such as the number of jumping. In this paper, the implemented cattle behavior detecting the system(TX module) are strapped on cattle's leg and it measures the cattle behaviors for determining where that a cattle is estrus or not by the proposed algorithm.