• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1-5
• /
• 2007

An electric motor unit (EMU) is manufactured from a large number of components and parts which are made of extensive raw materials. In emits much environmental load throughout its entire life cycle, having both complicated and elaborated system and long period of life time. Therefore, it is necessary to investigate the methodologies and tools to analyze the environmental performance of EMUs throughout their life cycle. RACE (Rail Assessment for Clean Environment) developed in this study is the software that can analyze the environmental impacts and eco-efficiency of EMUs, which are new concepts proposed for sustainable development. It has database for main components as well as principal materials contained in EMUs. Manufacturers and operators can use it to assess the life-cycle environmental impacts of EMU and support their decision making. RACE can also be used as a tool for environmental communication between manufacturers and operators.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.8
• /
• pp.701-709
• /
• 2001

In this days, heat pipe heat sink has been widely applied to power controllers for railway substations to remove heat from power semiconductors(diodes or thyristors). The heat pipe heat sink consists of a aluminum heating block for mounting the thyristor, 2~3 heat pipes and large number of aluminum fins. The present study was to get fundamental informations of the structure, design parameters and heat transfer performances of heat pipe heat sink. Series of operational test for a unit with 3 heat pipes were performed and its heat flow circuit was analysed from the experimentally obtained data on wall temperature distribution. Total resistance was ranged 0.02~$0.03^{\circ}C$/W for a power range from 40W to400W. The time to get the steady state was approximately longer than 20 minutes, and overshooting was not occurred during start up operation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.485-492
• /
• 2001

The dynamic analysis model is developed with the high-speed train (KTX) and a 2-span continuous prestressed concrete box girder bridge with a double track. The analytical results are compared with the dynamic field test results and found to be valid to yield quite accurate dynamic responses. The various trainset models with different number of cars are developed and compared with the results of the regular 20-car trainset model. It is concluded that the reduced trainset models, such as 7-car and 10-car models, cannot exactly produce the dynamic responses of bridges, especially when the train speed is high. Under the coincidence condition of two trains traveling with resonance velocity in the opposite directions, it is found that the impact factor under two-way coincidence is three times larger than that under one-way traffic. Consequently, for the bridge with a double-track it is necessary to check not only the dynamic responses of the bridge with one-way traffic but those with two-way coincidence.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.876-883
• /
• 2002

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. a lightweight vehicle body is salutary to save operating costs and fuel consumption. Therefore this study is to perform the size and the shape optimization of crossbeam fur electric vehicle using the method of topology optimization to introduce the concept of homogenization based on optimality criteria method which is efficient for the problem having the number of design variables and a few boundary condition. this provides the method to determine the optimum position and shape of circular hole in the cross beam and then can achieve the optimal design to reduce weight.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1138-1142
• /
• 2005

The IAQ management in subway cabin is very important for the enhancement of the amenity and health of passengers because the subway carries many passengers in a relatively short time mostly in urban area. However, since the ventilation of most subway cabins are performed by simple opening of doors at each stations, the IAQ management is not easy. In this study, we measured some IAQ factors (temperature, relative humidity, particulate matters, CO, and $CO_2$ concentration) of subway cabin in Seoul area. The results showed that the IAQ of the cabin was relatively acceptable. However, $CO_2$ concentrations were higher than 1,000 ppm in most cases. $CO_2$ concentration was mostly proportional to the number of passengers in cabin. Therefore, new method to relieve the $CO_2$ concentration is urgently required.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.281-287
• /
• 2006

Subway line becomes an important way of transportation as road traffic goes to limit. Recently the large number of passengers of the subway lines near metropolitan area, In-Cheon, Su-Won, Pyung-Teak and Chon-An, is rapidly increasing. The electric cars of the No. 1 subway line in the suburbs are now running fast compared to the downtown area. However, the fast electric car can be uncomfortable to ride in, because there are so much noise and vibration. In this research, the running characteristics of the electric car of the No. 1 subway line in the suburbs is investigated through the measurements of the noise and vibration at running condition.

• East Asian Economic Review
• /
• v.20 no.4
• /
• pp.427-445
• /
• 2016

We review research using departures from the law of one price to measure the advent of globalization in Europe and Asia. In an application, we then study the role of distance and time in statistically explaining price dispersion across 32 Swedish towns for 19 commodities from 1732 to 1914. The resulting large number of relative prices (502,689) allows precise estimation of distance and time effects, and their interaction. We find an effect of distance that declines significantly over time, beginning in the 18th century, well before the arrival of canals, the telegraph, or the railway.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.544-548
• /
• 2008

Typically electronic resistance type sensors have been used for measurement system of high-speed trains. But due to a large number of measurement quantities, we had difficulties in installing and maintaining the cables that connect sensors and measuring devices. Furthermore, signals obtained from the electronic resistance type sensors are often distorted because the sensors and cables are vulnerable to electro-magnetic interference (EMI). In this paper the characteristic of FBG sensors are compared with those of electronic resistance type sensors in application for the measurement system of high-speed trains. FBG sensors have advantages because of their multiplexing characteristic and robustness to EMI environment.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1524-1530
• /
• 2008

Generally a road vehicle's wrong entry into level crossing gives rise to hazardous events, the eventual collision with a approaching train depends on the effective operation of safety barriers such a abnormal condition detecting or emergency braking. In this paper, the risk assessment models developed for the level-crossing accidents will be introduced. The definition of hazardous events and the related hazardous factors are identified by the review of the accident history and engineering interpretation of the accident behavior. A probability of the hazardous events will be evaluated by the FTA, which is based on the accident scenario. For the severity estimation, the critical factors which can effect on the consequence will be reviewed during the ETA. Finally, the number of casualty for the public(vehicle drivers) and the train passengers are converted into an equivalent fatality.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.82-90
• /
• 2003

The advance in technology of the CWR in Korea has led the establishment of the CWR on the sharp curve (i.e. less than R=600m). As thermit welding used in the sharp-curved construction site is carried out on the curve track, it is difficult to adjust a curve shape accurately and these difficulties have occurred in a number of cases. Therefore, in this study, the lateral buckling analysis of CWR track was carried out considering the actual ballast resistance force. In addition, the cant and vertical resistance force in ballast was considered in order to predict the initial behaviour of bucking in track under the more accurate method.