• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.289-296
• /
• 2004

The present study has been performed to investigate the influences of rectangular fins on heat transfer in an impingement/effusion cooling system with crossflow. To simulate the impingement/effusion cooling system with initial crossflow, two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of the hole diameter. The crossflow passes between the plates, and various rectangular fins are installed on the plates. Reynolds number based on the hole diameter is fixed to 10,000 and the flow rate of crossflow is changed from 0.5 to 1.5 times of that of the impinging jet. A naphthalene sublimation method is used to obtain the heat/mass transfer coefficients on the effusion plate. Also to analyze the flow characteristics, a numerical calculation is performed. When rectangular fins are installed, the flow and heat transfer pattern is changed greatly from case without fins. In the injection hole region, the jet impinges on effusion plate without deflection and wall jet spreads symmetrically. In the effusion region, the crossflow accelerates due to the decrease of cross-sectional area in the channel. Local heat/mass transfer coefficients are enhanced significantly compared to case without fins. As the blowing ratio increases, the effect of fins against the crossflow becomes more significant and then the higher average heat/mass transfer coefficients are obtained than the case without fins.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.895-903
• /
• 2018

There are a large number of weirs installed in rivers of Korea, and these characteristics are not common in other countries. When the flow passes through a structure such as a weir, discontinuous flow occurs. In terms of numerical simulation, it affects the numerical instability due to the balance between the flow term and the source term. In order to solve these problems, many researchers used empirical formulas or numerical scheme simplification. Recently, researches have been conducted to use more accurate numerical scheme. K-River was developed to reflect the characteristics of domestic rivers and calculate the discontinuous flow more accurately. For the verification of K-River, 1) numerical experiment simulations with a bump in the bed, 2) laboratory experiment of hydraulic jump simulation, 3) real river were performed. K-River verified its applicability by simulating results similar to the exact solution and observed value in all simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.712-722
• /
• 2002

We have investigated a novel optical decoder for a fiber-optic code division multiple access(CDMA) communication systems. The conventional optical encoder and decoder have the advantage of simple structure. However the number of users in the system is limited by the auto- and cross-correlation properties generated in decoding process. In previous studies, to improve the system performance, although they used an optical code that minimize the sidelobe and cross-correlation, could not yet find a novel methods for performance improvement in fiber-optic CDMA system. Thus, it is necessary to investigate the novel optical decode in order to improve the performance of system. In this paper, we schematize the AND gate logic element(AGLE) composed with 1$\times$2 or 1$\times$3 coupler and the optical thyristor and propose the novel optical decoder using K(weight) AGLE. The optical thyristor only passes the overlapped signal and clips other signals. Such a novel concept means that the optical thyristor can operate as a hard-limiter. We analyze the fiber-optic CDMA system using the novel optical decoder with simulation and is found that the novel optical decoder using the AGLE and optical thyristor excludes the sidelobe and cross-correlation intensity between any two sequences.

• Korean Journal of Environment and Ecology
• /
• v.23 no.5
• /
• pp.381-391
• /
• 2009

This is the study of the effects and changes on the ichthyofauna and fish community in Jeonju-cheon stream (located in Jeonju Cit, Jeollabuk-do, South Korea) after the implementation of the Natural Stream Restoration Project. The restoration of the stream was carried out between April 2000 and December 2002, and it covered the mid-section of the stream starting from the upstream of Hanbyeok Bridge down to Samcheon where branches of water join. It is 7.2 km long and passes through the downtown area. In this study, comparisons were made before and after the restoration. Before the restoration (1975 to 1999), the number of fish species collected from the Jeonju-cheon stream turned out to be 12 to 18 species, whereas after the restoration (2003 to 2008), it increased up to 34 species in total. Especially in the case of the middle and downstream sections running across the central regions of the city (Daga Bridge to Seosin Bridge), the number of fish species significantly increased from 5 species to 22 species. Such a dramatic increase of fish species appears to be directly related to the restoration of the stream which was designed to improve the quality of water by preventing polluted sewage water from running into the stream. Besides, the structure of stream bed which became more diversified into various components such as marshes and shallows, as well as rocks, Pebbles, sand and clay, also contributed to the increase of fish species.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.5
• /
• pp.1-17
• /
• 2002

The immobilization and consolidation of the model coatings based on the plastic pigment and latex binder of known particle sizes were theoretically Studied in terms of the dense random packing of binary spheres and varying extent of latex film shrinkage. The porosity of the model coatings was calculated based on three proposed latex shrinkage models: Maximum, Minimum, and Linearly Decreasing Latex Shrinkage. The increasing extent of latex shrinkage was calculated up to the critical pigment volume concentration(CPVC) as a function of plastic pigment volume fractions, and the maximum latex shrinkage was estimated from the CPVC. Also, the number of pores and the average equivalent spherical pore diameters were calculated based on those proposed models. The opacity and gloss of the model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. As expected, various coating structure-property-composition relationships, such as opacity, gloss, porosity, etc., were shown to exhibit sharp transitions near the CPVC. The CPVC values determined by the opacity, gloss, and porosity vs. PVC relationships, respectively, agreed very well with each other. Especially, the CPVC's determined by the opacity and porosity vs. PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the intermediate value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. The ink gloss of the uncalendered model coatings applied onto commercial sheet offset coated papers was shown to be affected by both the coating gloss and porosity: the higher the coating gloss, the higher the ink gloss, but the higher the coating porosity, the lower the ink gloss. Their printability was also studied in terms of the number of passes-to-fail and the rate of ink setting as a function of both plastic pigment volume fractions and plastic pigment particle sizes. A minimum crack-free temperature(MCR) of latex-bound coatings was proposed to better predict the behaviors of latexes as coating binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.451-456
• /
• 2015

This research examines the use of Cross Bearing in the Republic of Korea Navy. Specifically, this study focuses on the degrees of errors caused by the order of measuring targets and suggests a new method to determine Advice Course. It then reviews the appropriateness of the contents of Location Report that is regularly to the duty officer during a voyage in a narrow channel. Whenever a naval vessel passes through a narrow channel, many number of sailors are assigned to diverse positions in order to enhance navigational safety. Even though it is possible to easily recognize the location of a ship with helps of various kinds of navigational equipments using state-of-the-art technology, there are still several situations where sailors' efforts are indispensible for calculating the position of their ship : when the ship is damaged during an engagement with enemies and when the enemies interfere (GPS) signals. In addition, the particularity of naval vessels in which many number of crew members can be assigned to various positions supports for the suitability of the use of Cross Bearing in the Navy. This study will contribute to navigational safety of the ROK Navy and fostering junior naval officers' seamanship.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.50-55
• /
• 2009

To understand the status of the migrating Oriental Honey Buzzard(Pernis ptilorhynchus) in Korea, we carried out a preliminary study on the number and local movements of the Honey Buzzard from September 2005 to October 2007 at Hongdo Island, Jeonnam Province, Korea. A total of 702 Honey Buzzards in 2005, 404 individuals in 2006, and 659 individuals in 2007 were recorded during the fall migration season, but during the spring migration season only two and eight birds were observed in 2006 and 2007 respectively. The migrating Honey Buzzard showed peak numbers from 20 September to 5 October at the study site. According to observation of arrival time of538 Honey Buzzard in October 2007, a total of 2l6 birds(40.l %) were passing over Hongdo Island between 7:00 AM to 8:00 AM, rising skyward on columns of warm air. This suggests the use of thermal currents and avoidance of nocturnal movement for crossing water. They preferred moderate winds(<5 m/s in speed) from northwest, but the migrating number apparently decreased in case of strong winds (${\geqq}5 m/s$). This suggests that wind speed and direction are important environmental factors for migration of the Oriental Honey Buzzard. At present, it is unclear which breeding population(from north-eastern China or Japan) passes over Hongdo Island. Moreover, it is difficult to prove migration route and to understand migratory behaviors of the Oriental Honey Buzzard in Korea. To prove the breeding sites and routes of the migrants over the study site, we need more detailed and further studies such as satellite tracking researches.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.5 no.1
• /
• pp.87-93
• /
• 1969

A study has been made on phenomena of fertilization, hair genesis, and development of such forma of cotton flower as Mok Po 5, Red Leaf, Paymaster, Acala 1517w. 1) The pollen occurs to germinat at 4 hrs after its pollination and reaches the base of style 10 hrs. later, when 18 hrs elapsed, it gets enter at micropyle passes through placenta. 2) There may remain only one synergid as another one is occupied by pollen tube when it enters micropyle. 3) The fertilization completed at 18-48 hrs. after pollination. It was observed that Mok Po5 is the fastest, somewhat slower in Red Leaf and the slowest is the case of Paymaster in its speed. 4) Wool hair is formed by development of daughter cell which is. due to epidermal cell division' it starts its way right before blooming. 5) Wool hair is the most in its number covering about 60-80 within one hour ofter pollination and finishes its forming within 4-6 hours. The number is more abunbant at basal portion of ovule and rather at outer surface than at inner one of it. 6) The average length of wool hair checked at different time limit is as follows. 2.7-8.3$^{\mu} m$ 1 hr after pollination. 43.3-263.7$^{\mu} m$ 24-48 hrs. after pollination. The growth speed both of Mok Po 5 and Red Leaf get nearly same value but Paymaster is somewhat slower in its speed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.3
• /
• pp.194-204
• /
• 2007

A numerical analysis and hydraulic experiments were undertaken to investigate the head loss occurring when a flow passes through vertical perforated walls. The numerical analysis applied continuity, momentum and energy equations to the control volumes that were set near the perforated wall. Non-dimensional equations were then derived to calculate both upstream depth and head loss for the given values of downstream depth and velocity. The hydraulic experiments were performed with several single and triple perforated plates varying their opening ratios and intervals. The numerical results with the single plates were compared with the experimental results, and it was shown that the contraction coefficient of the vertical line jet formed after the perforated plates relies on downstream Froude number as well as opening ratio. Based on the experimental results, empirical formulas were formulated. Finally, the formulas were applied to the triple plates sequentially from downstream side to upstream side, and it was found that in general the predicted values nicely agreed with the experimental results.

• Cartoon and Animation Studies
• /
• s.44
• /
• pp.85-116
• /
• 2016

This is the in-depth research dealing with Animatoon, the only animation-specialized magazine in Korea. By examining articles provided under the 'Animatoon Report' category, which is one of article categories set by the publisher, this research tries to find out the topic of articles and examine the tendency of topic. 'Animatoon Report' is chosen because the category title does not clearly show characteristics of articles, but has the second largest number of articles among all categories. First, the articles of the first ten years (1995-2005) has the largest number of pages as well as images, which means each article of this period tries to enrich its contents. Second, the role of magazine reporters are not critical considering the number of articles written by reporters are smaller than those made by the editorial department. Third, articles tries to deal with diverse issues and are mostly placed in front of the magazine. Fourth, in early days, articles used to provide the 3~5 lines of introductory summaries, but changed into provide the lead, the Korean and English subtitle, and so on. Fifth, articles mostly focus on issues of animation and Korea rather than other areas and countries. The results on the basis of article type are as follows. Among the types of people, work, organization/company, event, policy/industry, and etc, the policy/industry type has the largest amount of articles, and articles on the policy and those on the industry shows similar number of articles. Second, the event type has the second largest number of articles even though there are several separate categories only for the event. Third, articles in the et cetera type are often seen in early days because Animatoon who did not systemize the company itself focused on animation history and production techniques. Fourth, articles both on the people and the work type are consistently seen through the whole time period, but those on organization/company and event has more and more articles as time passes. In conclusion, it is possible to mention that the 'Animatoon Report' type shows more interest in policy and industry, and its interest on both issues are consistently seen from 2001 to 2015.