• 대한환경공학회지
• /
• 제38권3호
• /
• pp.128-134
• /
• 2016

S 매립장 매립가스 발전시설을 대상으로 발전량에 미치는 주요 요소와 그 영향도를 분석하였다. 50 MWh 24시간의 정상가동 일수는 2007년부터 2014년까지의 총 운전기간 일수대비 70.9%이었으며, 실제 생산한 전력은 이론적인 최대 발전 가능량 3,428,400 MW의 79.3%이었다. 발전효율에 영향을 미치는 주요 요소는 정기점검 등이 44.0%, 황화수소로 인한 감축운전이 37.4% 그리고 공기예열기 세정 18.6% 순이었다. 그러나 황화수소 감축운전 기간이 2년인 점을 감안하면 고농도 황화수소 발생이 매립가스 발전에 가장 큰 영향을 미치고 있었다. 장기적인 발전 가능량 분석결과 매립종료 해인 2018년 35.9 MWh 이었으며 이후 지속적으로 감소하여 2028년 16.6 MWh, 2038년에는 8.4 MWh 이하가 될 것으로 예측되었다.

• Journal of Gastric Cancer
• /
• 제12권3호
• /
• pp.187-193
• /
• 2012

Purpose: The aim of this study is to evaluate the feasibility and safety of cardia preserving proximal gastrectomy, in early gastric cancer of the upper third. Materials and Methods: A total of 10 patients were diagnosed with early gastric cancer of the upper third through endoscopic biopsy. The operation time, length of resection free margin, number of resected lymph nodes and postoperative complications, gastrointestinal symptoms, nutritional status, anastomotic stricture, and recurrence were examined. Results: There were 5 males and 5 females. The mean age was $56.5{\pm}0.5$ years. The mean operation time was $188.5{\pm}0.5$ minutes (laparoscopic operation was 270 minutes). Nine patients were T1 stage (T2 : 1), and N stage was all N0. The mean number of resected lymph nodes was $25.2{\pm}0.5$. The length of proximal resection free margin was $3.1{\pm}0.1$ cm and distal was $3.7{\pm}0.1$ cm. Early complications were surgical site infection (1), bleeding (1), and gastro-esophageal reflux disease (1) (this symptom was improved with medication). Late complications were dyspepsia (3) (this symptom was improved without any treatment), and others were nonspecific results of endoscopy or symptom. Conclusions: Cardia preserving proximal gastrectomy was feasible for early gastric cancer of the upper third. Further evaluation and prospective research will be required.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.120-127
• /
• 1994

Noise and vibration induced by subway operation are one of the major factor which annoy residents living near railway tracks. While lateral vibration is a major factor in analyzing seismic effect of the structure, vertical vibration became a major concern in considering the subway induced vibration because relatively smaller energy affects only nearby areas than that of earthquake. A characteristics of structural response induced by subway operation has been studied with different total height of the building and different number of spans. Also the frame with different span length has been studied. As the numbers of degrees freedom increase the higher mode effect on vertical vibration increases. Accordingly, the total affecting vertical modes are distributive as the numbers of degrees of freedom increase. Though the total degree of freedom increases, only some of the dominant modes actively affects to the vertical response of the structure. A frame with the number of equal spans could be analyzed by replacing the whole frame as one when we want to predict the response of the vertical vibration. Also it has been found that the seperate frame analysis will give little different result when adjacent span is relatively longer than others.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.195-203
• /
• 2005

Recently, a novel multi-bit nonvolatile memory based on double gate (DG) MOSFET is proposed to overcome the short channel effects and to increase the memory density. We need more complex voltage schemes for DG MOSFET devices. In view of peripheral circuits driving memory cells, one should consider various voltage sources used for several operations. It is one of the key issues to minimize the number of voltage sources. This criterion needs more caution in considering a DG nonvolatile memory cell that inevitably requires more number of events for voltage sources. Therefore figuring out the permissible range of operating bias should be preceded for reliable operation. We found that reliable operation largely depends on the depletion conditions of the silicon channel according to charge amount stored in the floating gates and the negative control gate voltages applied for read operation. We used Silvaco Atlas, a 2D numerical simulation tool as the device simulator.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.58-58
• /
• 2022

With the development of advanced technology, automation of agricultural work is spreading. In association with the 4th industrial revolution-based technology, research on field smart farm technology is being actively conducted. A state-of-the-art unmanned automated agricultural production demonstration complex was established in Naju-si, Jeollanam-do. For the operation of the demonstration area platform, it is necessary to build a sophisticated, advanced, and intelligent field smart farming model. For the operation of the unmanned automated agricultural production demonstration area platform, we are building data on the growth of soybean for smart cultivated crops and conducting research to determine the optimal time for agricultural work. In order to operate an unmanned automation platform, data is collected to discover digital factors for water management immediately after planting, water management during the growing season, and determination of harvest time. A subsurface drip irrigation system was established for smart water management. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. Vegetation indices were collected using drones to find key factors in soybean production prediction. In addition, major growth characteristics such as stem length, number of branches, number of nodes on the main stem, leaf area index, and dry weight were investigated. By discovering digital factors for effective decision-making through data construction, it is expected to greatly enhance the efficiency of the operation of the unmanned automated agricultural production demonstration area.

• 설비공학논문집
• /
• 제28권7호
• /
• pp.299-304
• /
• 2016

In recent years, heat source systems which have a principal effect on the performance of buildings are difficult to design optimally as a great number of design factors and constraints in large and complicated buildings need to be considered. On the other hand, it is necessary to design an optimum system combination and operation planning for energy efficiency considering Life Cycle Cost (LCC). This study suggests a multi-level and multi-objective optimization method to minimize both LCC and investment cost using a genetic algorithm targeting an office building which requires a large cooling load. The optimum method uses a two stage process to derive the system combination and the operation schedule by utilizing the input data of cooling and heating load profile and system performance characteristics calculated by dynamic energy simulation. The results were assessed by Pareto analysis and a number of Pareto optimal solutions were determined. Moreover, it was confirmed that the derived operation schedule was useful for operating the heat source systems efficiently against the building energy requirements. Consequently, the proposed optimization method is determined by a valid way if the design process is difficult to optimize.

• 한국철도학회논문집
• /
• 제10권2호
• /
• pp.231-242
• /
• 2007

As railroad industry faces the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high-speed long-distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for regular operations of the example maintenance center are developed. In this study, standard maintenance procedures, layout, equipments, and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. After simulation, four types of observations are analyzed. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Third, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared. Lastly, the simulation results according to worker's working coverage shows expanding the worker's coverage decreases the cycle time and increases throughput per train. However, workers are to be fully trained to do multiple skill work.

• 수산해양기술연구
• /
• 제39권1호
• /
• pp.50-55
• /
• 2003

자원관리형 자망$.$통발 어구어법 기술개발을 위한 연구의 일환으로 서해구의 자망$.$통발어업에 대한 현황을 파악하고, 서해구의 대표적인 어종 중의 하나인 민어를 어획대상으로 하는 민어 연안 유자망어업과 피뿔고둥을 주 어획대상으로 하는 기타 통발어업을 연구대상으로 선정하여 현장조사 등을 통하여 조업실태와 대상어종의 체장조성 등을 조사한 결과는 다음과 같다. 1. 서해구의 연안어업 총 허가건수는 12,944건(조업건수 7,558건; 2001년 12월말 현재)이며, 그 중에서 자망어업이 5,154건(조업건수 3,724건)으로 39.8%, 통발어업이 1,025건(조업건수 662건)으로 7.6%를 차지하였으며, 서해구에서의 조업율은 연안 자망어업과 연안 통발어업이 각각 72.3%와 64.6%로서 타 업종에 비해 비교적 높은 편이었다. 2. 민어 유자망어업의 주어기는 7월 중순부터 9월 초순까지이며, 주어장은 서해 남부 연안의 섬주변의 수심 약 15∼50m(주로 30m 이내)이고, 조업은 저질이 펄 또는 사니질인 해역에서 사리때를 전후하여 1일 1∼2회 1주일 정도 창조시 투망하여 1∼2시간 정도 어구가 조류에 표류하도록 한 후 양망하는 것으로 조사되었다. 3. 민어 유자망어업의 현장조사 결과 어획된 139마리의 체장 범위는 43.0∼120cm이고, 모우드(mode)는 85cm였으며, 꽃게$.$병어$.$가오리 등이 소량 혼획되었다. 4. 서해구에서의 피뿔고둥을 주대상으로 하는 기타 통발어업은 꽃게 어기(9월 초순∼10월 중순)를 제외한 시기에 연중 조업하며, 서해 연안의 수심이 10∼20m이고 저질이 사니질인 해역에서 보통 전날 투망하여 다음 날 양망하는 것으로 조사되었다. 5. 기타 통발어업의 현장조사 결과 조사기간 중 어획된 피뿔고둥 5,372마리의 갑장 범위는 4.5∼8.5cm이고, 모우드(mode)는 7.5cm였으며, 피뿔고등 91.7%, 배꼽고등 4.8%, 민꽃게$.$쥐노래미$.$조피볼락 등이 3.5% 정도 혼획되었다.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.546-558
• /
• 2020

While industrialization has provided in abundance, the pollution it creates has caused untold damage to the environment, increasing the frequency and severity of natural disasters through changes in global climate patterns. The World Risk Forum's (WEF) World Risk Report presented the results of a survey of experts from around the world detailing the most influential risk factors over the next decade. Notably, the failure to respond to climate change ranked first and the global water crisis third. The extreme drought in the western Chungnam province was unexpected in 2016. At the time, the water level of Boryeong Dam was drastically decreased due to receiving less than half the average recorded rainfall in the region that year. The Boryeong Dam diversion pipeline has the capacity to solve the water shortage problem between these two regions by providing water from Geumgang to the western part of Chungnam, including Boryeong City. Current weather trends suggest drought is likely to continue in western Chungnam, which uses the Boryeong Dam as an intake source. This makes it necessary to operate Boryeong Dam diversion pipeline in an efficient and effective manner. SWAT is a watershed scale model developed to predict the impact of land management practices on water. The SWAT model was used in this study to evaluate the adequacy of the Boryeong Dam diversion pipeline operational plan by comparing it to present Boryeong Dam diversion pipeline operation. By investigating the number of days required to reach each reservoir stage, we determined that the number of days required to reach the boundary stage was less than that of the current operation. This determination accounts for the caveats that the Boryeong Dam waterway was not operated and only one pump will be operated from October to May of next year. As our results suggest, the most stable operation scenario is to operate two pumps at all times. This can be accomplished by operating two pumps from the caution stage to increase the number of pumps whenever the stage is raised. In addition to the stable operation of the Boryeong Dam pipeline, policy considerations are required with regard to imposing a water use charge on users of the Boryeong Dam region.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4354-4359
• /
• 2010

본 연구는 임플란트 시술선택에 따른 환자만족도에 영향을 미치는 요인을 연구하기위해, 2009년7월 1일부터 2009년 9월 12일까지 대구지역 치과 병. 의원에 (병원2곳, 의원5곳)내원하는 임플란트 시술환자를 대상으로 설문조사 한 145부를 SPSS12.0 프로그램으로 분석하였다. 그 결과 발치원인에 따른 임플란트 시술에 대한 만족도는 치아우식증, 치주질환의 원인으로 발치 후 임플란트 식립 시에는 보통이 많았고, 외상은 만족이 가장 많았다(P<0.05). 발치 원인 별로 발음 기능 만족은 보통이 가장 많았고(P<0.001), 이물감등의 기능적인 부분의 만족도는 치주질환이 원인인 경우 불만족이 가장 많았다(P<0.01). 병원선택 이유에 따른 병원환경 만족도는 의사명성을 보고 선택했을 때 만족이 많았고, 집근처로 가까워서 선택한 경우 불만족이 많았다(P<0.001). 임플란트 식립 개수에 따른 치과 내원 횟수 만족도는 식립 개수가 많을수록 불만족을 나타냈으며 (P<0.01), 치아 모양 및 색상 만족도 분석에서는 '1~2개'와 '6개 이상'에서 만족이 높게 나타났다(P<0.05). 따라서 환자의 임플란트 만족도를 높이기위해서는 각 개인의 구강상태, 요구도를 정확히 인지한 후 개인에 따른 시술기간, 내원횟수, 기능, 심미작인 예상만족도를 제시해 주는 것이 진료자와 환자 상호간의 신뢰도를 높이고 시술 후 만족도의 향상에 기여할 것으로 사료 된다.