• Journal of Life Science
• /
• v.18 no.4
• /
• pp.542-549
• /
• 2008

Cisplatin (cis-diamminedichloroplatinum II : CDDP) is the most widely used anticancer drug against a variety of human neoplasms. However, its clinical use is limited by the onset of severe side effects, including ototoxicity and nephrotoxicity. Even though a number of evidences in cytotoxic mechanism of cisplatin have been suggested, the role of pro-inflammatory cytokines in cisplatin cytotoxicity of auditory cells has not yet been demonstrated. Herein our data clearly demonstrated that cisplatin decreased the viability of HEI-OC1 auditory cells, which was inhibited by the addition of neutralizing $anti-TNF-{\alpha}$, $anti-IL-1{\beta}$ and anti-IL-6 antibodies. Consistently, Neutralization with antibodies against pro-inflammatory cytokines ameliorated the cell death and disarrangement of cochlea hair cell layers in the rat primary cochlear explants which were treated with cisplatin. Furthermore, exogeneous supplementation with free radical scavengers, including GSH and NAC, significantly prevented the cytotoxicity of cisplatin in the rat primary cochlea explants. We also observed that $TNF-{\alpha}$ was predominantly expressed in Deiters and Hensen's cells located in hair cell zone of cisplatin-treated cochlear explants. These findings suggest that pro-inflammatory cytokines, including $TNF-{\alpha}$, $IL-1{\beta}$ and IL-6, may play a pivotal role in the pathophysiology of hair cell damages caused by ototoxic drug cisplatin.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.415-423
• /
• 2016

Cylindrical laminated veneer lumber (LVL) is produced by winding the veneer tape on a circular cylinder. The veneer tape was produced by cutting the veneer into a rectangular shape and sewing it in a vertical direction to the fiber. The tensile strength test was carried out by producing the veneer tape specimen with different species of veneer, types and combinations of sewing yarn. The Radiata pine veneer tape produced with three sewing lines using the reinforced sewing thread had the best tensile strength. Also, the separation and snapping problems of the veneer tape were improved, resulting in the improvement in the workability of cylindrical LVL. The bending strength of various cylindrical LVL produced with different types of veneer tape and a different number of lamination layers and the application of reinforcement with glass fiber cloth was compared with that of Larix log. Bending MOR of cylindrical LVL reinforced with glass fiber cloth at the volume ratio of 11% was improved by 65% in comparison to the non-reinforced cylindrical LVL. In the case of the cylindrical LVL produced with 2 sewing lines of veneer tape, a fracture occurred at the butt joint between the veneer tapes. However, in the case of the cylindrical LVL produced with 3 sewing lines of veneer tape a fracture occurred in the fiber direction.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.

• Korean Journal of Microbiology
• /
• v.21 no.2
• /
• pp.71-78
• /
• 1983

The number of aerobic free-living nitrogen fixation bacteria and factors in soil at different stands covered with Pinus rigida, Quercus acutissima and Zoysia japonica in Cheongju area were investigated from Feb. to Sept 1981. 1. The numbers of $N_2-fixation$ bacteria, according to the seasonal changes, increased gradually from winter to spring and summer. But the growth pattern revealed some differences in accordance with plant cover stands : the numbers increased abruptly in May at Pinus, May-June at Quercus and Apr. May at Zoysia stand. The pick of numbers represented in Aug. Sept, at Pinus, Jul-Aug. at Quercus and May-Jun. at Zoysia stand, respectively. 2. The interrelationship between the monthly changes of enviotnmental factors and numbers of $N_2-fixation$ bacteria at different stands, mainly depends upon the soil temperature than other soil factors (r=0.71-0.84). The numbers of $N_2-fixation$ bacteria may increase 5-7 times according to increase $10^{\circ}C$ of soil temperature, and optimal range was $20{\sim}30^{\circ}C$ for growth. Equation of the interrelation between soil temperature and numbers could be stated as follows : log y=ax+b. 3. In the case of high soil temperature, the bacterial numbers presented high level in drought periods. Therefore, the $N_2-fixation$ bacterial species in these soil seem to consist of resistant to desication. 4. The influence of soil organic matter for growth of $N_2-fixation$ bacteria indicated low conrelation. The reason may seen the content of organic matter in these soil existed abundantly above the quantities of limitation for growth. 5. In artifical gradients, the $N_2-fixation$ bacteria were predominated at $20{\sim}30^{\circ}C$ same as natural condition, pH7-8, and 20-30% of soil water contents. 6. The vertical distribution of bacteria marked decreasing trends from surface to lower layers, and the decreasing degree was shown well in Zoysia, Quercus and Pinus stand in order. But in the trees, the numbers increased at 30cm layer estimated the region of root than 20cm layer. 7. Both catalase megative and positive group of $N_2-fixation$ bacteria in soil increased according to the rise of the soil temperature. Catalase positive group was revealed as dominant group in winter, and catalase negative group revealed in summer. The change of dominant pattern was shown during Feb. to Apr.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.189-193
• /
• 1981

An apparatus for continuous measurements of sorption isotherm of dried food was manufactured to shorten the time required for equilibration. The apparatus was so designed that the temperature, air velocity and relative humidity in the experimental chamber could be controlled. The use of dynamic stream of conditioned air with a velocity of 0.2m/sec, instead of static atmosphere, allowed a faster equilibration of dried filefish muscle at $25^{\circ}C$. The mean time necessary for the equilibration of dried filefish muscle at the water activity of a given state to a higher water activity was about 45 hours. The monolayer moisture content of dried filefish muscle calculated from BET-equation was 0.092 kg water /kg dry matter at $25^{\circ}C$.

• Journal of Korean Dental Science
• /
• v.11 no.2
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.1-5
• /
• 2012

This study was conducted to elucidate the cause of micro-cracking in the exocarp of 'Jinmi' peach (Prunus persica). through the microscopic observation of fruit skin development in 4 varieties such as 'Jinmi', 'Kanoiwa Hakuto', 'Kawanakajima Hakuto', and 'Yumyeong'. Micro-cracking was noted in 59.1% of 'Jinmi', 30.6% of 'Kanoiwa Hakuto', 21.5% 'Kawanakajima Hakuto' and 6.4% of 'Yumyeong', respectively. The development of intercellular spaces, which increased rapidly with the fruit development, was easily observed at 69 days after full bloom. Histological studies revealed that the number of outer epiderm cell layers of 'Jinmi' was smaller than that of the other three cultivars, and thinner than the 'Kawanakajima Hakuto' and 'Yumyeong'. Moreover, 'Jinmi' exhibited smaller and flatter shapes in the sub-epidermal cell layer than those of the 'Kawanakajima Hakuto' and 'Yumyeong' at harvest season. Therefore, these results suggest that micro-cracking of 'Jinmi' fruit skin was due to poor-developed outer epidermis and well-developed intercellular spaces just under exocarp as compared with other varieties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1C
• /
• pp.39-51
• /
• 2011

A large number of small particles may surround large gravels which are non-contact and dispersed within the ground. The strength of such soil may be influenced by the mechanical properties of a few coarse gravels. A specimen or gravel size can impact the shear characteristics of sand with dispersed gravels. In this study, the size of gravel and specimen varies and its effect on shear characteristics of a granular soil was evaluated. Five sizes of gravels with 7, 12, 15, 18, and 22 mm were used repeatedly and inserted in the middle of each compacted layer. A specimen consists of five or ten equal layers depending on gravel size, which is 5 cm or 10 cm in diameter and 10 cm or 20 cm in height. An embedded gravel ratio by weight is 3% and constant for all cases with gravel. After consolidation, a series of undrained triaxial compression tests under three confining pressures was performed on sand with dispersed gravels. The maximum deviator stress of a specimen with 10 cm in diameter was at average 30% higher than that with 5 cm in diameter and increased up to 90% for a specimen with gravel. When a gravel size of 7 and 12 mm used, the maximum deviator stress of a specimen with 10 cm in diameter was higher than that of one without gravel, whereas the maximum deviator stress of a specimen with 5 cm was higher or lower than that without gravel. The gravel size and specimen diameter influenced the undrained behavior of sand. The maximum deviator stress of a specimen with gravel either increased or decreased compared to that without gravel, depending on the ratio of gravel size to specimen diameter, 1/5.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.907-916
• /
• 2015

The purpose of this study was to identify characteristics of vegetation structure, vegetation succession, and species diversity of artificially planted Chamaecyparis obtusa (CO) stands. The study was carried out by performing vegetation survey for eight CO stands located in Jeollanam-do Province, Korea. Analysis on vegetation classification and ordinations of the stands was conducted using the data from the vegetation survey, and as a result, the stands were classified into five types of communities. Community I showed a considerably lower index of species diversity when compared to other communities because the canopy of the dominant CO was so highly dense that the low-height vegetation was not able to develop or the low-height vegetation almost disappeared due to elimination of weed trees. Meanwhile, the Community II - IV had relatively higher indices of species diversity because various native tree species mixed with the low-height vegetation and competed with each other in the understory and shrub layers to some degree of stability or in their early stage of vegetation development. Community V, lastly, showed higher use intensity as a recreational forest, thus developing simpler vegetation structure on account of artificial intervention. There was positive correlation between photosynthetically active radiation entering the forest floor, number of observed species and index of species diversity. Such characteristics of vegetation structure in CO stands are closely associated with forest management and prescription for planting reforestation, thinning, and brush cutting in the past. There was a slight difference in vegetation structure and species diversity by communities, based on rotation time of the vegetational succession, process of disturbance frequency and disturbance, development, and maturity by planting CO stands. However, when compared to natural forests, the CO stands showed simpler vegetation structure. Because artificial forests are vulnerable in ecosystem service with lower species diversity, a drive for ecological management is needed for such forests to change into healthy ecosystems that can display functions of public benefit.

• Applied Microscopy
• /
• v.24 no.3
• /
• pp.1-9
• /
• 1994

Pardosa astrigera possessed eight eyes arranged in three rows on the frontal carapace. A pair of small anterior lateral eyes (ALE) flanked each side by an anterior median eyes (AME) lay along the anterior margin that was situated on the anterior row of clypeus. The anterior lateral eye was composed of cornea, vitreous body, and retina. Cornea was made up mainly of exocuticle lining the cuticle. Lens in anterior lateral eye was biconvex type which bulged into the cavity of the eyecup. Outer and inner central region of lens were approximately spherical with radius of curvature $5.6{\mu}m$ and $12.5{\mu}m$, respectly. Vitreous body formed a layer between the cuticular lens and retina. They formed biconcave shape. Retina of the anterior lateral eyes was composed of three types of cells: visual cells, glia cells, and pigment cells. The visual cells were unipolar neuron, as were the receptor of the posterior lateral eye. But cell body was unique to the anterior lateral eyes. They were giant cell, relatively a few in number, and under the layer of vitreous bodies. Each visual cell healed rhabdomeres for a short stretch beneath the cell body. Rhabdomes were irregulary pattern in retina and electron dense pigment granules scattered between the rhabdomes. Glia cell situated at the cell body of visual cell and glia cell process reached to rhabdomere portion. Below the rhabdome, tapetum were about $30{\mu}m$ distance from lens, which composed of 4-5 layers. It was about $25{\mu}m$ length that intermediate segment of distal portion of visual cell. Electron dense pigment granules between the intermediate segment were observed.