• 한국지반신소재학회논문집
• /
• 제9권4호
• /
• pp.39-45
• /
• 2010

부직포에 의한 보강이 모래의 역학적 거동에 미치는 영향에 대해 검토하였다. 이 검토를 위해 보강모래와 무보강모래에 대한 일련의 삼축압축시험이 수행되었다. 표준사인 주문진사가 사용되었고, 부직포 보강재가 모래시료 속에 최대 3층 배치되었다. 분석결과 모래속의 부직포 배치는 모래의 전단강도를 크게 증가시켰고, 보강모래는 파괴시의 변형률도 증가하였다. 또한, 보강층수가 증가할수록 보강재에 의한 시료내 전단층의 확산 방지효과의 증가로 보다 연성화하고, 모래시료의 체적팽창 경향은 부직포 배치에 의해 억제됨이 밝혀졌다. 보강층수 증가에 의한 효과는 간극비 감소로 인한 효과와 같다.

• 태양에너지
• /
• 제12권3호
• /
• pp.28-36
• /
• 1992

상변화물질로의 열전달기구로써 열싸이폰을 사용하는 잠열 축열 시스템의 축열성능을 실험을 통해 조사하였다. 상변화 물질로는 파라핀 왁스(Sunoco P-116)를 사용하였고 왁스의 유효열전도계수를 높이기 위해 여러겹의 구리망을 왁스에 넣었으며 이 구리망은 열싸이폰의 fin의 역할도 하게했다. 열주입율을 변화시켜 실험을 수행하였으며 주요 결론은 다음과 같다. (1) 구리망 사이의 공간은 용해된 왁스의 대류유동을 허용하여 왁스내의 온도를 비교적 균일하게 해 준다. (2) 구리망의 수가 증가하면 전도열전달은 향상하나 대류작용은 억제된다. (3) 구리망의 수가 증가하면 열싸이폰의 열관류계수와 전 열관류계수는 증가하나 열싸이폰의 응축부와 왁스사이의 열전달계수는 감소한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.216-227
• /
• 2004

A new cavitating model by using bubble size distribution based on bubbles-mass has been proposed. Both liquid and vapor phases are treated with Eulerian framework as a mixture containing minute cavitating bubbles. In addition vapor phase consists of various sizes of vapor bubbles, which are distributed to classes based on their mass. The bubble number-density for each class was solved by considering the change of the bubble-mass due to phase change as well as generation of new bubbles due to heterogeneous nucleation. In this method, the bubble-mass is treated as an independent variable, and the other dependent variables are solved in spatial coordinates and bubble-mass coordinate. Firstly, we employed this method to calculate bubble nucleation and growth in stationary super-heated liquid nitrogen, and bubble collapse in stationary sub-cooled one. In the case of bubble growth in super-heated liquid, bubble number-density of the smallest class based on its mass is increased due to the nucleation. These new bubbles grow with time, and the bubbles shift to larger class. Therefore void fraction of each class is increased due to the growth in the whole class. On the other hand, in the case of bubble collapse in sub-cooled liquid, the existing bubbles are contracted, and then they shift to smaller class. It finally becomes extinct at the smallest one. Secondly, the present method is applied to a cavitating flow around NACA00l5 foil. Liquid nitrogen and liquid oxygen are employed as working fluids. Cavitation number, $\sigma$, is fixed at 0.15, inlet velocities are changed at 5, 10, 20 and 50m/s. Inlet temperatures are 90K in case of liquid nitrogen, and 90K and 1l0K in case of liquid oxygen. 110K of oxygen is corresponding to the 90K of nitrogen because of the same relative temperature to the critical one, $T_{r}$=$T/T_c^{+}$. Cavitating flow around the NACA0015 foils was properly analyzed by using bubble size distribution. Finally, the method is applied to a cavitating flow in an inducer of the LE-7A hydrogen turbo-pump. This inducer has 3 spiral foils. However, for simplicity, 2D calculation was carried out in an unrolled channel at 0.9R cross-section. The channel moves against the fluid at a peripheral velocity corresponding to the inducer revolutions. Total inlet pressure, $Pt_{in}$, is set at l00KPa, because cavitation is not generated at a design point, $Pt_{in}$=260KPa. The bubbles occur upstream of the foils and collapse between them. Cavitating flow in the inducer was successfully predicted by using the bubble size distribution.

• 한국중재학회지:중재연구
• /
• 제25권4호
• /
• pp.77-95
• /
• 2015

CISG provides a uniform framework for contracts of sale of goods between parties whose places of business are in different States. In 2004 South Korea became the 63th State around world to adopt CISG. Starting next year CISG goes into effect as the law that governs the contracts for international sale of goods, in respect of which CISG displaces the existing domestic civil and commercial codes of Korea. By its provision Article 1(a), CISG applies directly between Contracting States without reference to private international law. As South Korea's biggest trade partners including China, the U.S. and Japan are also parties to CISG, the number of such direct applications continuously increases. Now it is estimated, though roughly, that CISG governs about two-thirds of Korea's import and export trade of goods. The private survey of the author shows that up to now in South Korea there are 39 court cases decided by the first instance courts, 29 cases by the appellate court and six cases by the Supreme Court of South Korea. In nearly all these cases, CISG applied directly. Furthermore, currently CISG is, in several respects, influencing upon the revision of Korean civil code which is designed to modernize it: The revised draft published in 2013 adopts the rules on the revocation of offers provided in articles 15 and 16, the rule on the termination of offers provided in article 17 and the rule on the time that an acceptance takes its effect provided in article 18 of CISG. More importantly, in accordance with the rules taken by CISG, the revision draft no longer requires the existence of fault or negligence on behalf of the breaching party in order for the aggrieved party to void the contract, and the revised draft denies the right of avoidance for trivial, not fundamental, breaches of contract.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.315-319
• /
• 2020

In various fields, several studies based on carbon nanotubes (CNTs) have been conducted. The results of previous studies, wherein CNT coatings have been incorporated as solid lubricants, demonstrate that the friction and wear characteristics of CNT coatings can be improved through the absorption/dispersion of the contact pressure by controlling the stiffness of the nanomesh structure comprising CNT strands. In this study, the friction and wear characteristics of the following are compared: CNT coating formed by spin coating of CNT solution, compressed CNT coating, and compressed/heated CNT coating (wherein CNT strands are squeezed through compression and/or heating). It is observed that the friction coefficient of the CNT coating having the largest number of voids between the CNT strands is significantly lower than those of the compressed CNT coating and the compressed/heated CNT coating. The wear tracks of the compressed CNT coating and the compressed/heated CNT coating indicate that some parts become torn or adhere into a lump. However, in the case of the CNT coating, a smooth wear surface is formed by rubbing. Furthermore, as the void space between the squeezed and adhered CNT strands decreases, the resistance to structural deformation increases, thereby resulting in an increased frictional force and a wear pattern that becomes torn or forms a lump. Hence, the results obtained from this study corroborate that the friction and wear characteristics of CNT coatings can be enhanced through the absorption/dispersion of the contact pressure by controlling the stiffness of the nanomesh structure of CNT coatings.

• 한국물환경학회지
• /
• 제22권3호
• /
• pp.546-556
• /
• 2006

The purpose of this study is to improve the polluted stream water quality by pilot-scale five different constructed wetlands (CWs). Cell 1 to 3 are newly designed 2SFCW (Surface-subsurface flow CW) with 1 to 3 flow shifters (FS) in the middle of the wetland system. Cell 4 and 5 are control CW (CCW), but Cell 5 is the same type as Cell 3. The FS, which converts the route of surface and subsurface flow between two wetlands connected in series, was able to enhance the treatability of TN via nitrification and denitrification and of SS due to filtration and sedimentation. The void fraction and dispersion number of Cell 1, 2 and 3 obtained from the RTD analysis were found to be 0.73 and 0.17, respectively. COD and TP removal efficiencies of Cell 1 to 3 were similar to that of Cell 4 and 5. SS removal efficiencies of Cell 1 to 3 and 5 with FS were 5-10% higher than that of Cell 4 without FS. TN removal efficiencies of Cell 1 to 3 were 3-14% higher than that of Cell 4 and 5. The average $R^2$ values of COD, SS, TN and TP obtained from nonlinear regression analysis were similar to the results of other researchers.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.529-536
• /
• 2002

The performance of stilting engine, in particular, its energy conversion efficiencies are critically influenced by the regenerator characteristics. The regenerator characteristics are influenced by effectiveness, void fraction. heat transfer loss and fluid friction loss in the regenerator matrix. These factors were influenced by the surface geometry and material properties of the regenerator matrix. The regenerator design goals arc good heat transfer and low pressure drop of working Bas across the regenerator. Various data for designing a wire screen matrix have been given by Kays and London(1984). The mesh number of their experiment. however, was confined below the No. 60. which seems rather small for the Stirling engine applications. In this paper. in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed mettled of matrix in oscillating flow as the same condition of operation in a Stirling engine. Seven kinds of sing1e wire screen meshes were used as the regenerator matrices. The results are summarized as follows; 1. While the working fluid flew slowly in the regenerator. the temperature difference was great at the both hot-blow(the working fluid flows from healer to cooler) and cold-blow(the working fluid flows from cooler to healer). On the other hand. while the working fluid flew fast. the temperature difference was not distinguished. 2. The No.150 wire screen used as the regenerator matrix showed excellent performance than tile others. 3. Phase angle variation and filling rate affected heat transfer or regenerator matrices. 4. Temperature difference between the inlet and outlet of the regenerator is very hish in degree of 120 phase angle.

• Transactions on Electrical and Electronic Materials
• /
• 제12권5호
• /
• pp.193-196
• /
• 2011

Lead zirconate titanate (PZT)/ bismuth ferrite (BFO) multilayer thin films have been fabricated by the spin-coating method on Pt(200 nm)/Ti(10 nm)/$SiO_2$(100 nm)/p-Si(100) substrates using $BiFeO_3$ and $Pb(Zr_{0.52}Ti_{0.48})O_3$ metal alkoxide solutions. The PZT/BFO multilayer thin films show a uniform and void-free grain structure, and the grain size is smaller than that of PZT single films. The reason for this is assumed to be that the lower BFO layers play an important role as a nucleation site or seed layer for the formation of homogeneous and uniform upper PZT layers. The dielectric constant and dielectric losses decreased with increasing number of coatings, and the six-layer PZT/BFO thin film has good properties of 162 (dielectric constant) and 0.017 (dielectric losses) at 1 kHz. The remnant polarization and coercive field of three-layer PZT/BFO thin films were 13.86 ${\mu}C/cm^2$ and 37 kV/cm respectively.

• 한국통신학회논문지
• /
• 제39A권11호
• /
• pp.660-674
• /
• 2014

RFID 시스템은 무선 식별이라는 장점으로 인해 다양한 서비스에 사용되고 있다. 그러나 서비스에 무임승차하거나 자산, 개인정보 탈취를 위한 공격들이 알려지고 있어 그 해결책에 대한 연구도 활발하다. 그 중 중계 공격의 일종인 마피아 공격은 먼 거리에 있는 태그와 리더의 메시지를 중간에서 전달만 하여 인증에 성공할 수 있는 공격으로 일반적인 보안 프로토콜로는 방어할 수 없다. 이에 Hancke와 Kuhn은 거리 제한 프로토콜을 RFID 태그와 리더의 인증에 적용하였다. 그 이후 Munilla와 Peinado는 Hancke와 Kuhn의 프로토콜에 무요청를 추가하여 공격자의 마피아 공격 성공 확률을 낮춘 거리 제한 프로토콜을 제안하였다. Ahn et al.은 Munilla와 Peinado의 프로토콜보다 통신량과 해시 연산량을 줄인 프로토콜을 제안하였다. 본고에서는 Munilla와 Peinado의 프로토콜이 테러리스트 공격에 취약하고, 카운터를 사용하여 잡음을 고려하였음에도 불구하고 잡음이 생길 경우 비동기로 인해 더이상의 인증이 불가함을 밝힌다. 또, Ahn et al.의 프로토콜이 마피아 공격과 키 노출에 취약함을 밝히고, 이 취약점들을 개선하여 테러리스트 공격과 마피아 공격에 안전하고 잡음을 고려한 프로토콜을 제안하며, 기존 프로토콜과 제안 프로토콜의 안전성, 효율성을 비교분석한다.

• 한국지반환경공학회 논문집
• /
• 제16권4호
• /
• pp.33-40
• /
• 2015

현재 제안되고 있는 압밀과 관련된 상관식들은 분석대상 지역이 국외나 국내의 특정지역에 국한되거나 자료의 숫자를 늘리기 위해 여러 지역의 실험자료를 통합함으로써 적용에 무리가 따르는 경우가 많다. 또한 취득된 자료의 명확한 통계적 평가없이 모형이 개발되어 왔다. 따라서 본 연구에서는 시험자료의 불확실성을 최대한 줄이기 위해 서해안의 연약지대를 한강과 금강, 영산강으로 대분하고 물리적 특성치와 역학적 특성치에 대하여 정규성 검증과 회귀분석을 수행하였다. 분석결과 압축지수와 수정압축지수의 직선성이 강하며, 모든 지역에서 수정압축지수와 초기간극비가 가장 상관성이 양호하고 다음으로 전체단위중량, 함수비, 액성한계 순으로 나타났다. 또한 깊이에 따른 과압밀비는 모든 지역에서 깊이가 5~6m 이하의 경우 과압밀비의 폭이 크게 나타나며, 5m~6m 이상일 경우 일정한 값을 가지는 패턴을 보였다.