• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.799-804
• /
• 2011

본 논문에서는 칩저항을 실장하는 솔더에 대한 온도사이클 시험을 수행하고, 그 결과로부터 고장 예지 실현을 위한 열하중에서의 솔더실장의 고장메커니즘을 연구하였다. 시험 중 솔더의 고장을 모니터링하기 위하여 실장된 칩저항 양단간의 저항 변화를 데이터 측정기로 실시간 관찰하였다. 관찰 데이터로부터 솔더의 크랙 진전 중과 크랙 진전 완료 시점의 고장 메커니즘을 제시하였다. 제시된 고장 메커니즘을 유한요소법으로 검증하여 솔더의 크랙이 진전 중에는 저온조건에서 크랙이 열리고 저항이 증가하며, 크랙의 진전이 완료된 후에는 고온조건에서 크랙이 열리고 저항이 증가하는 조건으로 바뀜을 보였다. 이런 결과에 기반하여 온도 사이클에서 저항측정을 통해 칩저항 실장 솔더의 고장예지가 가능함을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.881-895
• /
• 2011

Seoul Metro railway facilities' inspection and maintenance tasks cause failure analysis, but if there is trouble the diverse cause investigation and the systematic analysis and management among broken facilities, related facilities and components fell short and the conditions are different. And, excess and insufficiency, under inspection and maintenance, is being raised regardless of the introduction year and the operating environment including the number of use by applying the same facilities in the uniform inspection cycle. In this study, we will analysis systematically facility system information, failures, operational status, performance, fault and maintenance information resulting from the maintenance management of railway facilities and derive the relationship between associated equipment and its components. In addition, optimizing the inspection and the maintenance cycles of railway facilities, we will improve the reliability of operation. Considering the probability of risk, it is possible to predict the occurrence of accidents or faults and to minimize the frequency of breakdown by pre-inspection maintenance. Finally, This paper is to introduce the content of constructing the Seoul Metro RCM-based failure analysis system for railway facilities to support the optimal continuance of operation status of equipments and the securement of the safe operation of vehicles.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1341-1346
• /
• 2009

In this paper, the technique to reinforce the durability performance of structure using the sensitivity information for the frame structure is applied. The fatigue life calculation for the frame structure is performed from the quasi-static and transient analysis and the characteristics of two methods are compared for the fatigue analysis. Then the reinforcement technique is applied. First, some design variables related to the locations of fatigue failure is selected. Then sensitivities of fatigue life at fracture points with respect to the variation of design variables are calculated and the vector composed of gaps between the target life and initial life cycles is calculated. If the number of fatigue fracture points is same as the number of design variables, the variations of the design variables are calculated from the linear algebraic equation. If not, the variations of the design variables are calculated from the optimization formulation with the constraints.

• 한국임상수의학회지
• /
• 제32권5호
• /
• pp.399-403
• /
• 2015

복막투석은 혈액에서부터 오는 체액과 노폐물을 교환하는 복강내의 막인 복막을 이용한 투석방법으로, 신부전과 중독증 환자에서의 치료법이다. 본 연구에서는 신부전증 개에서 자동투석기를 이용한 복막투석의 치료효율과 합병증에 대해 평가하였다. 10마리의 개를 대상으로 Swan neck 카테터(Neonatal, Coviden)와 자동 복막투석기를 사용하여 복막투석을 실시하였고, 그 효과는 요소감소율(urea reduction ratio)로 평가하였다. 평균 크레아틴닌 감소율과 평균 요소감소율은 $7.09{\pm}3.84$과 $145.8{\pm}48.5$였다. 평균 투석횟수는 $6{\pm}1$회 였다. 투석치료후 유의성 있는 요소의 감소가 7/10 개에서 관찰되었고, 유의성 있는 크레아틴의 감소가 9/10 개에서 관찰되었다. 요소의 감소율이 크레아틴 감소율보다 더 높게 관찰되었다. 1회 투석당 요소와 크레아틴닌의 감소율은 $0.064{\pm}0.023$과 $0.065{\pm}0.023$이 였다. 본 연구에서의 복막투석에 따른 합병증은 카테터 막힘, 투석액의 피하누출, 패혈성 복막염, 저알부민혈증, 과수화 등이었다. Swan neck 카테터와 자동 복막투석기를 이용한 복막투석은 임상에서 적용 가능하였으며 본 연구를 통하여 성공적인 복막투석의 가능성을 보여주었다. 하지만 합병증을 최소화하기 위해서는 주의 깊은 모니터링이 필요할 것으로 판단된다.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.36-45
• /
• 1996

The precise estimation of the reliability and life of the Ravigneaux planetary gear train used in an automatic transmission is necessary in order to enable accurate material and geometric properties to reliability distrobution and the number of load cycles at failure. These are critical for the proba- bilistic design of complex planetary gear system as Ravigneaux type particularly during various gear ratios. The Ravigneaux planetary gear train has five gears, such as a forward and a reverse sun gear, a short and a long pinion, and an annulus gear. In this paper, the Ravigneaux gear system is analyzed to figure out the reliablity distribution. i.e. the probability of survival in the system without its overhaul. First, the reliablity method based on the Weibull distribution is used in conjuction with the Palmgren's model to predict both the individual reliabilities of its components and the nimber of load cycles when the system failed. Then using the presented method, the life of the Ravigneaux gear system can be determined. Alwo the different design parameters such as tooth face width, material property, and Weibull exponent are applied and reached to optimal ones. Thus, the precise evaluation of the reliability and life of the Ravigneaux planetary gear train used in an automatic transmission can be effectively carried out.

• 산업경영시스템학회지
• /
• 제43권1호
• /
• pp.61-69
• /
• 2020

Systems such as database and socal network systems have been broadly used, and their unexpected failure, with great losses and sometimes a social confusion, has received attention in recent years. Therefore, it is an important issue to find optimal maintenance plans for such kind of systems from the points of system reliability and maintaining cost. However, it is difficult to maintain a system during its working cycle, since stopping works might incur users some troubles. From the above viewpoint, this paper discusses minimal repair maintenance policy with periodic replacement, while considering the random working cycles. The random working cycle and periodic replacement policies with minimal repair has been discussed in traditional literatures by usually analyzing cases for the nonstopping works. However, maintenance can be more conveniently done at discrete time and even during the working cycle in real applications. So, we propose that periodic replacement is planned at discrete times while considering the random working cycle, and moreover provide a model in which system, with a minimal repair at failures between replacements, is replaced at the minimum of discrete times KT and random cycles Y. The average cost rate model is used to determine the optimal number of periodic replacement.

• Composites Research
• /
• 제16권1호
• /
• pp.13-18
• /
• 2003

복합재료의 피로수명을 평가하는 것은 여러 가지 파손모드와 파손모드 간의 강호작용 때문에 복잡하다. 본 논문에서는 현상론적인 모델(비선형 강도저하 모델)을 이용하여 피로수명과 잔류강도를 예측할 수 있는 방법을 제시하였다. 잔류강도를 하중 사이클 수와 피로응력의 함수로 가정하였으며, 계산에 필요한 모델변수(강도저하 파라미터, 피로수명형상 파라미터)를 피로수명의 함수로 가정하였다 임의로 배열된 하중 스펙트럼 상에서 응력수준에 따른 모델 매개변수를 구하기 위해 S-N 선도를 이용하였고, 상이한 응력비에 대하여 전술한 매개변수를 Goodman식의 보정을 통하여 계산하였다(피로선도). 임의의 하중이력 후의 잔여강도 분포를 2모수 weibull 함수로 표현하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제20권2호
• /
• pp.117-123
• /
• 1993

The condition of the endometrium is an important factor which may influence the success or failure in IVF-ET. This study was undertaken for evaluation of the value of endometrial growth as an early predictor for the success of IVF. Ultrasonographic endometrial measurement were performed in 43 IVF cycles that conceived, 101 cycles that did not with an IVF-ET There was no significant difference in the endometrial thickness and the serum concentration of estradiol in the pregnant versus nonpregnant group(10.4 vs. 9.9 mm: 2348 vs. 2017 pg/ml no hCG administration day). No correlation was found between the ultrasound image and serum estradiol levels around the time of hCG administration(r=0.54, p=0.13 no Day 2; r=0.45, p=0.14 no Day 1). The duration of gonadotropin treatment, number of follicles, number of oocytes retrieved, and fertilization rate were not statistically different in the two groups, however, there was a significant difference in the number of embryos in the pregnant versus nonpregnant group)p< 0.05). A higher pregnancy rate and ongoing pregnancy rate occured with an endometrial thickness over 11 mm compared with below 7mm(p< 0.05, p< 0.005). however, no significant differences were noted in the implantation rate and abortion rate among the groups that classified according to their endmetrial thickness. The endometrial growth(${\Delta}$) from hCG administration day(DO) to D6 was greater in the women who achieved pregnancy than in the nonpregnant group(p< 0.01). There were no significant differences in serum estradiol levels, implantation rate, pregnancy rate, and abortion rate among the groups that classified according to the pattern of echogenesity of endometrium, however, significantly higher ongoing pregnancy rate was noted in group A, B compared with group C.(p< 0.0001, p< 0.001) These results suggest that there were no ultrasonographically detectable differences in the patterns of endometrial growth and development around the time of hCG administration in patients who conceive versus those that do not in IVF-ET.

• Clinical and Experimental Reproductive Medicine
• /
• 제21권1호
• /
• pp.21-29
• /
• 1994

Subzonal insemination(SUZI) has been proposed for patients with severe male factor and previous fertilization failure. However, very low fertilization rates still persisted. The aims of this study were firstly, to examine the relationships between the fertilization rate and sperm parmeters, sperm incubation media and time, secondly, to evaluate the outcome of 119 cycles of SUZI applied the modified sperm preparation method. The fertilization rates were influenced more sensitively by sperm preincubation media and time than by sperm parameters. According to preincubation media and time, the fertilization rates were 43.3% in 50% follicular fluid (HFF), 36.6% in 10% fetal cord serum(FCS), and with the time, increased in FCS, but decreased in HFF. In regrd with sperm parameters, the fertilization rates were 42.9% in normal and 37.6% in subnormal group. The best results were obtained from SUZI by the spermatozoa incubated in 50% HFF for 6-8 hours. So we tried 119 cycles of SUZI(normal; 39 cycles, subnormal; 80 cycles) using the preparation method of 6-8 hour incubation in 50% HFF. There were no signigicant differences in the fertilization rates between normal(125/269, 46.4%) and subnormal sperm(264/635, 41.6%). Contrary to the fertilization rates, pregnancy outcomes were different between both groups. Better results obtained from the subnormal group than the normal in the number of transferred embryos, that of good embryos, and developmental rate of the fertilized eggs. The pregnancy rates per transfer were totally 13.3%(13/98),20.0%(13/65) in subnormal group. In the normal group, 2 patients showed ${\beta}$-hCG positive, but resulted in chemical pregnancy. Of 13 clinical pregnancies, two aborted, 6 on-going, and 5 delivered. In conclusion, SUZI is an effective technique to overcome fertilization failure for male factor and unexplained. The fertilization rate is influenced by sperm parameters, sperm incubation media and time. Also the quality of oocytes might be important for pregnancy as same as that of sperm.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.165-191
• /
• 1990

Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoration, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of $5{\times}5{\times}25mm$. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respecitvely. Porcelain glass transition temperatures and expansion values were derived alloy-porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal-porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated: 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than that of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly 5. Alloy-porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.