• 한국진공학회지
• /
• 제2권2호
• /
• pp.199-208
• /
• 1993

Si 기판 표면상태 변화와 관련된 핵생성 자유에너지 증가에 따른 다이아몬드 박막성장 거동을 관찰하였다. 표면 염마조건 변화에 따른 3가지 기판(A-Si, B-Si, C-Si)위에 동일한 성장조건으로 다이아몬드를 성장하였으며, 이때 형상인자와 관련된 자유에너지 관계는 ${\Delta}G_{A-Si}<{\Delta}G_{B-Si}<{\Delta}G_{C-Si}$이다. AES, SEM, XRD, RHEED에 의해 각각의 박막 A, B, C를 조사한 결과, 핵생성 자유에너지가 가장 적은 A 박막은 (100) (110) 면이 지배적인 고품위 다이아몬드 박막이다. 자유에너지가 A에 비해 다소 적은 B 박막은 (111) 면이 지배적인 8면체 다이아몬드 박막이고, 자유에너지가 자장 적은 C 박막은 흑연이 많이 함유된 구상의 다이아몬드이다.

• 한국결정성장학회지
• /
• 제28권6호
• /
• pp.229-234
• /
• 2018

조핵제 역할을 하는 지르코늄의 원료로써 $ZrO_2$(지르코늄 옥사이드), $ZrSiO_4$(지르코늄 실리케이트), $ZrOCl_2$(지르코늄 옥시클로라이드), $Zr(SO_4)_2$(지르코늄 서페이트) 4종류의 원료를 사용하여 $Li_2O-Al_2O_3-SiO_2$계 결정화 유리를 제조하였다. 동일한 조성의 모든 유리에서 Avrami 상수는 3 이상으로 체적 결정화가 진행됨을 확인하였다. 또한 $ZrOCl_2$, $Zr(SO_4)_2$를 사용하여 제조한 유리는 용융 과정에서 미용융물이 발생하지 않으며 지르코늄 성분이 균일하게 분포되었음을 확인하였다. 이와 같은 결과를 성분 분석, 굽힘 강도를 연계하여 평가하였다.

• 한국염색가공학회지
• /
• 제15권4호
• /
• pp.57-64
• /
• 2003

Poly(ethylene-co-vinyl acetate)(EVA) microspheres were prepared by a thermally induced phase separation. The microsphere formation occurred by the nucleation and growth mechanism in the metastable region. The diluent used was toluene. The microsphere formation and growth was followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by SEM observation and particle size analyzer, became broader when the polymer concentration was higher, the content of vinyl acetate in EVA copolymer was higher, and the cooling rate of EVA copolymer solution was lower.

• 한국염색가공학회지
• /
• 제17권4호
• /
• pp.15-20
• /
• 2005

Poly(ethylene-co-vinylacetate)(EVA) microspheres were prepared by thermally induced phase separation in toluene. The microsphere formation occurred by the nucleation and growth mechanism in metastable region. The effects of the polymer or pigment weight percentage and cooling rate on microsphere formation were investigated. The microsphere formation and growth were followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by particle size analyzer, became broader when the polymer concentration was higher, the pigment concentration and the cooling rate of EVA copolymer solution were lower.

• Carbon letters
• /
• 제15권3호
• /
• pp.151-161
• /
• 2014

Exceptional progress has been made with chemical vapor deposition (CVD) of graphene in the past few years. Not only has good monolayer growth of graphene been achieved, but large-area synthesis of graphene sheets has been successful too. However, the polycrystalline nature of CVD graphene is hampering further progress as graphene property degrades due to presence of grain boundaries. This review will cover factors that affect nucleation of graphene and how other scientists sought to obtain large graphene domains. In addition, the limitation of the current research trend will be touched upon as well.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.35-58
• /
• 2000

The demand for sub-micrometer or nanometer functional ceramic powders with a better suspension behavior in aqueous media in increasing. Redispersible barium titanate (BT) nanocrystals, green light emitting Mn2+ doped Zn$_2$SiO$_4$ and ZnS nanoparticle phosphors were synthesized by a hydrothermal method or chemical precipitation with surface modification. The nanoparticle redispersibility for BT was achieved by using a polymeric surfactant. X-ray diffraction(XRD) results indicated that the BT particles are of cubic phase with 80 nm in size. XRD results of zinc silicate phosphor indicate that seeds play an important role in enhancing the nucleation and crystallization of Zn$_2$SiO$_4$ crystals in a hydrothermal condition. This paper describes and discuss the methods of surface modification, and the resulting related properties for BT, zinc silicate and zinc sulfide.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.35-35
• /
• 2002

Atomic force microscopy was applied to study the formation and growth mechanism of thin chrome layers prepared under various pulse plating conditions. The chrome was electro-deposited from an electrolyte bath containing 250 gl-l of chromic acid, 25 gl-l of sulfuric acid using direct current density of $1.6{\;}mA.$\textrm{mm}^{-2} and pulse currents with on-off time from 5 to 900 ms. The higher current density enhanced nucleation rate which resulted in refining grain size. The chrome growth kinetics determining nodule size and shape significantly depends on the duration of on-time rather than duration of off-time and on/off time ratio.

• 대한전자공학회논문지
• /
• 제25권7호
• /
• pp.767-773
• /
• 1988

We have proposed a new simple and easy method for the observation of OSF growth and shrinkage. This method is to observe the behavior of OSF in thedamaged region during oxidation as well as annealing process after introducing mechanical damage on the silicon surface by pressure-controllable indentor. The effect of SiO2 layer on the shrinkage of pregrown OSF generated by the proposed method has been investigated using the samples with or without SiO2 layer. From the experimental data, we suggest a model for the shrinkage of OSF, which is based on the recombinaiton mechanism between silicon interstitial and vacancy at the Si-SiO2 interface.

• 세라미스트
• /
• 제22권4호
• /
• pp.417-428
• /
• 2019

Even though, nanoscale materials of various shapes and compositions have been synthesized in the liquid, their underlying growth and transformation mechanisms are not well understood due to a lack of analytical methods. The advent of liquid cell for transmission electron microscope (TEM) enables the direct imaging of chemical reactions that occur in liquids with nanometer resolution of the electron microscope (EM). Here, the technical development of liquid cell TEM equipment and their applications to the study of nanomaterials analysis in liquid are discussed. Also new findings discovered through liquid cell TEM studies such as nucleation & growth, coalescence process and transformation are discussed.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.122-128
• /
• 2002

This study was conducted to synthesize the diamond like carbon films by plasma enhanced chemical vapor deposition (PECVD). The effects of gas composition on growth and mechanical properties of the films were investigated. A little amount of hydrogen or oxygen were added to base gas mixture of methane and argon. Methane dissociation and diamond like carbon nucleation were enhanced by installing negatively bias grid near substrate. The deposited films were indentified as hard diamond like carbon films by micro-Raman spectroscopy. The surface and fractured cross section of the films which were observed by scanning electron microscopy showed that film growth is very slow as about 0.3$\mu\textrm{m}$/hour, and relatively uniform with hydrogen addition. Vickers hardness of tungsten carbide (WC) cutting tool increased from about 1000 to 1600~1800 by deposition of DLC film, that of commercial TiN coated tool was about 1270. In cutting test of aluminum 6061 alloy, DLC coated cutting tool showed 1/3 or lower crater and flank wear than TiN coated or non-coated WC cutting tools.