• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.967-973
• /
• 2021

In 2011, an earthquake and subsequent tsunami hit the Fukushima Daiichi Nuclear Power Plant, causing simultaneous accidents in several reactors. This accident shows us that if there are several reactors on site, the seismic risk to multiple units is important to consider, in addition to that to single units in isolation. When a seismic event occurs, a seismic-failure correlation exists between the nuclear power plant's structures, systems, and components (SSCs) due to their seismic-response and seismic-capacity correlations. Therefore, it is necessary to evaluate the multi-unit seismic risk by considering the SSCs' seismic-failure-correlation effect. In this study, a methodology is proposed to obtain the seismic-response-correlation coefficient between SSCs to calculate the risk to multi-unit facilities. This coefficient is calculated from a probabilistic multi-unit seismic-response analysis. The seismic-response and seismic-failure-correlation coefficients of the emergency diesel generators installed within the units are successfully derived via the proposed method. In addition, the distribution of the seismic-response-correlation coefficient was observed as a function of the distance between SSCs of various dynamic characteristics. It is demonstrated that the proposed methodology can reasonably derive the seismic-response-correlation coefficient between SSCs, which is the input data for multi-unit seismic probabilistic safety assessment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2101_2102
• /
• 2009

Solar energy has inestimable development potential. However, it is an extreme intermittent and inconstant energy source. The radiative energy output from the sun derives from a nuclear fusion reaction. So it is necessary to study the photovoltaic P-V characteristics according to the irradiation. The results show that the DC power of the photovoltaic system is increased along with the increasing values of irradiation and module.

• 한국지진공학회논문집
• /
• 제25권6호
• /
• pp.261-266
• /
• 2021

Nuclear power plants in Korea were designed and evaluated based on the NRC's Regulatory Guide 1.60, a design response spectrum for nuclear power plants. However, it can be seen that the seismic motion characteristics are different when analyzing the Gyeongju earthquake and the Pohang earthquake that has recently occurred in Korea. Compared to the design response spectrum, seismic motion characteristics in Korea have a larger spectral acceleration in the high-frequency region. Therefore, in the case of equipment with a high natural frequency installed in a nuclear power plant, seismic performance may be reduced by reflecting the characteristics of domestic seismic motions. The failure modes of the equipment are typically structural failure and functional failure, with an anchorage failure being a representative type of structural failure. In this study, comparative analyses were performed to decide whether to consider the inelastic behavior of the anchorage or not. As a result, it was confirmed that the seismic performance of the anchorages could be increased by considering the inelastic behavior of an anchorage.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.295-301
• /
• 2013

Long-term global energy-demand growth is expected to increase driven by strong energy-demand growth from developing countries. Fusion power offers the prospect of an almost inexhaustible source of energy for future generations, even though it also presents so far insurmountable scientific and engineering challenges. One of the challenges is safe handling of hydrogen isotopes. Metal hydrides such as depleted uranium hydride or ZrCo hydride are used as a storage medium for hydrogen isotopes reversibly. The metal hydrides bind with hydrogen very strongly. In this paper, we carried out a modeling and simulation work for absorption/desorption of hydrogen by ZrCo in a horizontal annulus cylinder bed. A comprehensive mathematical description of a metal hydride hydrogen storage vessel was developed. This model was calibrated against experimental data obtained from our experimental system containing ZrCo metal hydride. The model was capable of predicting the performance of the bed for not only both the storage and delivery processes but also heat transfer operations. This model should thus be very useful for the design and development of the next generation of metal hydride hydrogen isotope storage systems.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.595-603
• /
• 2012

국제핵융합실험로(ITER)가 2019년까지 7개국의 공동개발사업으로 건설될 예정이다. ITER의 핵융합연료주기는 핵융합진공용기, 삼중수소 플랜트, 연료공급부로 구성되어 있다. 이중에서 삼중수소 플랜트는 핵융합연료주기를 위한 중 수소와 삼중수소의 저장, 공급, 분리, 제거, 회수 등의 기능을 제공한다. 삼중수소 플랜트는 외부에서 중수소와 삼중수소를 공급받아 저장 공급하는 SDS, 토카막배출처리의 TEP, 수소동위원소 분리의 ISS, 삼중수소수 및 대기 처리의 WDS ADS, 정성 정량분석의 ANS 등으로 구성된다. 이 논문에서는 삼중수소 플랜트를 구성하는 주요 공정에 대한 기능 및 설계요건을 기술하였다. 한국은 SDS 개발에 참여하고 있으며 월성원전 삼중수소 제거설비(WTRF) 건설 및 운전경험을 통해 WDS 대한 기술을 일부 확보하였다. 향후 ISS 및 TEP에 대한 기술확보를 위한 여러 분야에서의 참여 확대를 기대하고 있다.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.33-38
• /
• 2023

Spray cooling is a method of cooling high-temperature heating elements by spraying droplets. Recently, spray cooling has been proposed for use in next-generation nuclear reactors. When droplets are sprayed onto the outer wall of a heat exchanger tube, a film boiling occurs on the outer wall. Over time, the outer wall temperature decreases, and a liquid film forms on the outer wall, and the heat exchanger outer wall is subsequently cooled by the liquid film. In this case, the liquid film thickness has a great influence on the heat removal performance. In this study, an experimental study was conducted to measure the liquid film thickness distribution in a droplet spray environment. For this purpose, a method using the electrical conductivity of the liquid was adopted.

• Nuclear Engineering and Technology
• /
• 제20권4호
• /
• pp.246-252
• /
• 1988

KAERIT 토카막 장치의 플라즈마 생성을 위한 수소기차 방전실험에 관해 기술하였다. 이 실험에서는 일주전압, 토로이달 자장, 충전기체 압력, 오차자장 및 예비전리 등이 방전시작에 미치는 영향이 연구되었다. 오차자장은 방전에 가장 큰 영향을 미치는 인자로서 방전전압이 최소가 되는 것은 결국 오차자장 성분을 가장 잘 상쇄시켰을 때였다. 예비전리의 효과는 전반적으로 두드러지지는 않았지만 밀폐 성능이 나쁠수록 상대적으로 크게 나타났다. 실험적으로 구해진 방전시작조건은 이론적인 모델의 계산결과와 비교하였다. 실험에서의 방전영역이 이론적인 계산결과에 비해 줄어드는 경향을 보이고 있는 것은 고려되지 않은 다른 인자에 기인하는 것으로 판단되지만 토카막의 방전시작단계를 다루기에는 이 모델로도 충분하다.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.120-126
• /
• 2015

Recently, the ever-increasing use of fossil fuels for rapid industrial development and population significantly caused an environment pollution and global warming such as climate change. So research and development of sustainable and eco-friendly energy have been performed. Especially the interest in nuclear fusion fuel was significantly increased from the developed countries. The system of fusion energy production was tritium separation, storage and delivery, and purification. Republic of Korea is in charge of Storage and Delivery System (SDS) in the International Thermonuclear Experimental Reactor (ITER). Welding part of the SDS bottles for storing the tritium is known to be susceptible to hydrogen embrittlement. In this study, conducted a study for the relaxation of the stability and hydrogen embrittlement of the weld area. The hydrogen heat treatment was processed through the Pressure-Composition-Temperature (PCT) device according to the time variation. Also mechanical properties such as impact test and hardness test according to using the alkaline cleaning liquid for hydrogen embrittlement relief and the fracture was observed by scanning electron microscopy (SEM) after the mechanical properties evaluation.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4209-4214
• /
• 2022

Precise modelling of the interaction of ions with materials is important for many applications including material characterization, ion implantation in devices, thermonuclear fusion, hadron therapy, secondary particle production (e.g. neutron), etc. In this study, a new approach using the Geant4 toolkit in combination with the Bayesian regularization (BR) learning algorithm of the feed-forward neural network (FFNN) is developed to estimate the range of ions in materials accurately and quickly. The different incident ions at different energies are interacted with the target materials. The Geant4 is utilized to model the interactions and to calculate the range of the ions. Afterward, the appropriate architecture of the FFNN-BR with the relevant input features is utilized to learn the modelled ranges and to estimate the new ranges for the new cases. The notable achievements of the proposed approach are: 1- The range of ions in different materials is given as quickly as possible and the time required for estimating the ranges can be neglected (i.e. less than 0.01 s by a typical personal computer). 2- The proposed approach can generalize its ability for estimating the new untrained cases. 3- There is no need for a pre-made lookup table for the estimation of the range values.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4191-4203
• /
• 2023

Robotics applications are greatly needed in hazardous locations, e.g., fusion and fission reactors, where robots must perform delicate and complex tasks under ionizing radiation conditions. The drawback is that some robotic parts, such as active electronics, are susceptible to radiation. It can lead to unexpected failures and early termination of the robotic operation. This paper analyses the ionizing radiation effect from 0.09 to 1.5 Gy/s in robotic components (microcontrollers, servo motors and temperature sensors). The first experiment compares the performance of various microcontroller types and their actuators and sensors, where different mitigation strategies are applied, such as using Radiation-Hardened (Rad-Hard) microcontrollers or shielding. The second and third experiments analyze the performance of a 3-Degrees of Freedom (DoF) robotic arm, evaluating its components' responses and trajectory. This study enhances our understanding and expands our knowledge regarding radiation's impact on robotic arms and components, which is useful for defining the best strategies for extending the robots' operational lifespan, especially when performing maintenance or inspection tasks in radiation environments.