• 대한가정학회지
• /
• 제49권5호
• /
• pp.97-115
• /
• 2011

The focus of this study was on the self-differentiation level of families with an elderly member suffering from dementia. Based on 340 questionnaires collected in Seoul and Gyeonggi, the study intended to explain the adaptation issues of those families. The variables of interest, which might be related to the self-differentiation, were chronic anxiety(i.e. stress), the family function, psychosomatic symptoms and the family's adaptation to care-giving. As a result of analyzing the effects of the variables potentially related to the self-differentiation level of care-giving families, the findings from this study were as follow. With decreasing self-differentiation level of the family caring for an elderly member suffering from dementia, the levels of stress and psychosomatic symptoms were significantly increased, but the family function and the adaptation to care-giving tended to decrease. Conversely, with increasing self-differentiation, the levels of stress and psychosomatic symptoms were significantly decreased, while the family function and adaptation to care-giving were promoted.

• BMB Reports
• /
• 제38권3호
• /
• pp.354-359
• /
• 2005

Open reading frame 29 (ha29) is a gene specific for Helicoverpa armigera single-nucleocapsid nucleopolyhedrovirus (HearSNPV). Sequence analyses showed that the transcription factor Tfb2 motif, bromodomain and Half-A-TPR (HAT) repeat were present at aa 66-82, 4-76, 55-90 of the Ha29 protein respectively. The product of Ha29 was detected in HearSNPV-infected HzAM1 cells at 3 h post-infection. Western blot analysis using a polyclonal antibody produced by immunizing a rabbit with purified GST-Ha29 fusion protein indicates that Ha29 is an early gene. The size of Ha29 product in infected HzAM1 cells was about 25 kDa, which was larger than the presumed size of 20.4 kDa. Tunicamycin treatment of HearSNPV-infected HzAM1 cells suggested that the Ha29 protein is N-glycosylated. Fluorescent confocal laser scanning microscope examination, and Western blot analysis of purified budded virus (BVs), occlusion-derived virus (ODVs), cell nuclear and cytoplasmic fraction, showed that the Ha29 protein was localized in the nucleus. Our results suggested that ha29 of HearSNPV encodes a non-structurally functional protein that may be associated with virus gene transcription in Helicoverpa hosts.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.501-510
• /
• 2008

비행체를 레이더의 시야에 들어나지 않도록 하기 위한 은신 (stealth) 기술은 일반적으로 비행체 표면에 특수도료를 도포하는 방식을 사용하여 실현하고 있지만 요즈음 플라즈마의 전자기파 흡수 능력을 이용하려는 연구가 활발히 진행되고 있다. 대기압 플라즈마가 은신기술에 응용될 수 있는가 우선 물리적인 타당성을 알아보기 위해 이 논문에서는 대기층에서 비행하는 비행체 표면을 어떤 정도의 플라즈마로 얼마나 덮어야 원하는 은신 기능을 나타낼 수 있는지 판단할 수 있도록 비 자장, 비 균일, 평판 플라즈마 모델을 사용하여 계산한 결과를 제시하고 논의한다.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.22-28
• /
• 2016

It is necessary to store and supply hydrogen isotopes for Tokamak operation. A storage and delivery system (SDS) is used for storing hydrogen isotopes as a metal hydride form. We designed and fabricated a depleted uranium (DU) bed to store hydrogen isotopes. The rapid storage of hydrogen isotopes is very important not only for safety reasons but also for the economic design and operation of the SDS. The delivery rate at the desorption temperatures without the operation of a dry pump was analyzed in comparison with that with the operation of the dry pump. The effect of the initial desorption temperatures on the dehydriding of the DU without the operation of the dry pump was measured. The effect of the initial desorption temperatures on the dehydriding of DU with the operation of the dry pump was also measured and analyzed. The primary pressure on the desorption temperatures without the operation of the dry pump was analyzed in comparison with that with the operation of the dry pump. The temperature gradient of the coil heater and the primary vessel was also analyzed. Our results will be used to develop pilot scale hydrogen isotope processes. It was confirmed that dehydriding of a medium-scale DU bed has enabled without the operation of the dry pump.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.28-33
• /
• 2008

This paper presents the characteristics of mechanical properties within the heat affected zones(HAZs) of dissimilar metal weld joint between SA508 Gr.1a and F3l6 stainless steel(SS) with Alloy 82/182 filler metal. Tensile tests were performed using small-size specimens taken from the heat affected regions close to both fusion lines of weld, and the micro-structures were examined using optical microscope(OM) and transmission microscope(TEM). The results showed that significant gradients of the yield stress(YS), ultimate tensile stress(UTS), and elongations were observed within the HAZ of SA508 Gr.1a. This was attributed to the different microstructures within the HAZ developed during the welding process. In the HAZ of F316 SS, however, the welding effect dominated the YS and elongation rather than UTS. TEM micrographs demonstrated these characteristics of the HAZ of F316 SS was associated with a dislocation-induced strain hardening.

• Journal of Welding and Joining
• /
• 제7권3호
• /
• pp.28-35
• /
• 1989

It was reported that the toughness for welded region was influenced by various factors such as the gradient for prior austenite grain size, the variation of microhardness and the characteristic microstructure depending on distance from the fusion boundary. Therefore, in order to evaluate the fracture strength of the weldment in which the microstructures change continuously, it is important to assess the peculiar strength of each microstructure in welded region. It was known that the small punch(SP) test technique which was originally developed to study the irradiation damage effect for the structures of nuclear power plant was also useful to investigate the strength evaluating of nonhomogeneous materials. In this paper, by means of a small punch test technique the possibility of evaluating strength of parent and welded region in SS41 and SM53B steels was investigated. The obtained results are summerized as follows: 1) The small punch test which showed markedly the ductile-brittle transition behavior in this experiment may be applied to evaluation for the fracture strength of welded region. 2) It was shown that the ductile-brittle regime lied in Region III(plastic membrane stretching region) of the flow characteristics observed in SP test. 3) The SP test technique which shows a more precipitous energy change transition behavior than the other test technique is able to estimate the more precise transition temperature. 4) It could be seen that in comparision with the structure of parent the structure of weld HAZ in SS41 steel was improved while it in SM53B steel was deteriorated.

• Molecules and Cells
• /
• 제40권5호
• /
• pp.371-377
• /
• 2017

Despite the importance of the receptor activator of nuclear factor (NF)-kappaB ligand (RANKL)-RANK signaling mechanisms on osteoclast differentiation, little has been studied on how RANK expression is regulated or what regulates its expression during osteoclastogenesis. We show here that insulin signaling increases RANK expression, thus enhancing osteoclast differentiation by RANKL. Insulin stimulation induced RANK gene expression in time- and dose-dependent manners and insulin receptor shRNA completely abolished RANK expression induced by insulin in bone marrow-derived monocyte/macrophage cells (BMMs). Moreover, the addition of insulin in the presence of RANKL promoted RANK expression. The ability of insulin to regulate RANK expression depends on extracellular signal-regulated kinase 1/2 (ERK1/2) since only PD98059, an ERK1/2 inhibitor, specifically inhibited its expression by insulin. However, the RANK expression by RANKL was blocked by all three mitogen-activated protein (MAP) kinases inhibitors. The activation of RANK increased differentiation of BMMs into tartrate-resistant acid phosphatase-positive ($TRAP^+$) osteoclasts as well as the expression of dendritic cell-specific transmembrane protein (DC-STAMP) and d2 isoform of vacuolar ($H^+$) ATPase (v-ATPase) Vo domain (Atp6v0d2), genes critical for osteoclastic cell-cell fusion. Collectively, these results suggest that insulin induces RANK expression via ERK1/2, which contributes to the enhancement of osteoclast differentiation.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.80-85
• /
• 2006

The peak demand of electricity in summer season mainly comes from the day time cooling loads. Ice thermal Storage System (ITSS) uses off-peak electricity at night time to make ice for the day time cooling. In order to maximize the use of cold storage in ITSS, the estimation of day time cooling load for the building is necessary. In this study, we present a method of cooling load estimation using 5 years of normalized outdoor temperature, relative humidity, and the building construction data. We applied the hourly-based estimation to a general hospital building with relatively less sudden heat exchange and the results are compared with the measured cooling load of the building. The results show that the cooling loads estimation depends on the indoor cooling design temperature of the building.

• 한국재료학회지
• /
• 제31권8호
• /
• pp.465-470
• /
• 2021

Deuterium is a crucial clean energy source required for nuclear fusion and is a future resource needed in various industries and scientific fields. However, it is not easy to enrich deuterium because the proportion of deuterium in the hydrogen mixture is scarce, at approximately 0.016 %. Furthermore, the physical and chemical properties of the hydrogen mixture and deuterium are very similar. Therefore, the efficient separation of deuterium from hydrogen mixtures is often a significant challenge when using modern separation technologies. Recently, to effectively separate deuterium, studies utilizing the 'Kinetic Quantum Sieving Effect (KQS)' of porous materials are increasing. Therefore, in this review, two different strategies have been discussed for improving KQS efficiency for hydrogen isotope separation performance using nanoporous materials. One is the gating effect, which precisely controls the aperture locally by adjusting the temperature and pressure. The second is the breathing phenomenon, utilizing the volume change of the structure from closed system to open system. It has been reported that efficient hydrogen isotope separation is possible using these two methods, and each of these effects is described in detail in this review. In addition, a specific-isotope responsive system (e.g., 2nd breathing effect in MIL-53) has recently been discovered and is described here as well.

• 한국압력기기공학회 논문집
• /
• 제19권1호
• /
• pp.11-19
• /
• 2023

Additive manufacturing technology, called as 3D printing, is one of fourth industrial revolution technologies that can drive innovation in the manufacturing process, and thus should be applied to nuclear industry for various purposes according to the manufacturing trend change in the future. In this paper, we performed tensile tests of 3D printed stainless steel 316L as-built specimens manufactured by two types of technology; DED (Directed Energy Deposition) and PBF (Powder Bed Fusion). Their mechanical properties (tensile strength, yield strength, elongation and reduction of area) were compared. As a result of comparison, the mechanical properties of the PBF specimens were slightly better than those of DED specimens. In the same additive type of specimens, the tensile and yield strength of specimens in the X and Y direction were higher than those in the Z direction, but the elongation and ROA were lower.