• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.3
• /
• pp.383-393
• /
• 2020

The corrosion behavior of Hastelloy C-276 was investigated to identify its applicability for carbon-anode-based oxide reduction (OR), in which Cl₂ and O₂ are simultaneously evolved at the anode. Under a 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar flow, the corrosion rate was less than 1 g·m^-2·h^-1 up to 500℃, whereas the rate increased exponentially from 500 to 700℃. The effects of the Cl₂-O₂ composition on the corrosion rate at flow rates of 30 mL·min^-1 Cl₂, 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂, and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ with a constant 170 mL·min^-1 Ar flow rate at 600℃ was analyzed. Based on the data from an 8 h reaction, the fastest corrosion rate was observed for the 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ case, followed by 30 mL·min^-1 Cl₂ and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂. The effects of the chlorine flow rate on the corrosion rate were negligible within the 5-30 mL·min^-1 range. A surface morphology analysis revealed the formation of vertical scratches in specimens that reacted under the Cl₂-O₂ mixed gas condition.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1178-1191
• /
• 2005

In this paper, we propose a synthesis method of software fault tree from software requirements specification written in NuSCR formal specification language. The software fault tree, proposed in this paper, reflects requirements on both structure and behavior and it is an integrated form. The software fault tree can be used for analyzing safety in the view of structure and behavior. We propose templates for each components in NuSCR specification language and a synthesis method of software fault tree using the templates. The research was applied into the main trip logic of the reactor protection system of ARP1400, the Korean next generation nuclear reactor system, developed by KNICS. And we evaluate feasibility of our approach through this case study.

• Journal of Radiation Protection and Research
• /
• v.29 no.4
• /
• pp.257-261
• /
• 2004

A coded-aperture gamma camera was developed to increase the sensitivity of a pin hole camera made with a pixellated CsI(Tl) scintillator and a position-sensitive photomultiplier tube. The modified round-hole uniformly redundant array of pixel size $13{\times}11$ was chosen as a coded mask considering the detector spatial resolution. The performance of the coded-aperture camera was compared with the pin hole camera using various forms of Tc-99m source to see the improvement of signal-to-noise ratio or the improvement of the sensitivity. The image quality is much improved despite of a slight degradation of the spatial resolution. Though the camera and the test were made for low energy case, but the concept of the coded-aperture gamma camera could be effectively used for the radioactive environmental monitoring and other applications.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.429-434
• /
• 2004

An ophthalmic endoscope which is used in medical applications should have the total diameter less than 1 mm. Its image resolution is limited to 30∼40 lp/mm. Therefore, the image resolution is one of the most important factors to decide image quality of the ophthalmic endoscopic images. This study obtained high resolution and magnifying ophthalmic endoscopic images by a new optical design using a 0.23 pitch GRIN lens and high resolution fiber-optic image guide which has less than 5 ${\mu}{\textrm}{m}$ diameter microfibers. The resolutions of images from existing and from a new type of ophthalmic endoscope are measured and compared using a USAF resolution target.

• Journal of the Korean Chemical Society
• /
• v.60 no.1
• /
• pp.28-33
• /
• 2016

The spiropyran is a typical material having photodegradation properties in the process of photochromism. The spiropyran has been utilized in various applications such as optical switch, optical memories, and biosensor because of its remarkable stability, fast responsive time, stronger color change, and photo-induced controllability. However, the spriropyran is photodegraded by the repetitive optical irradiation. The photodegradation of spiropyran have been investigated by using UV-Visible spectroscopy, nuclear magnetic resonance (NMR), and Raman spectroscopy. Herein, the properties of spiropyran were characterized by using terahertz time-domain spectroscopy (THz-TDS) in the terahertz frequency region. In terahertz region, the measured absorbance of spiropyran was increased due to the photodegradation induced by the repetitive UV irradiation. The absorbance tendency of spiropyran in the terahertz frequency region was compared with that in the visible region, and they were completely opposite to each other.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.625-631
• /
• 2013

Mucoadhesive property is the major function as an adhesive for medical devices, and therefore, these days many researches have conducted to develop polymers having this property. Recently, biomimetic technology has been used for developing mucoadhesive polymers. Among many technologies, mussel-inspired approaches have received noticeable attention because of its thread's strong adhesive characteristics. In this study, we synthesized mucoadhesive biomimetic polymers employing catechol structures which are abundant in mussel adhesive proteins, and their structures and molecular weights were characterized by using nuclear magnetic resonance spectroscopy and gel permeation chromatography. To evaluate in vitro mucoadhesive strength, the sheet type of the small intestinal porcine submucosa was prepared. Compared to commercial fibrin glue adhesives, catechol-containing mucoadhesive polymers showed enhanced adhesive strength. The study of adhesive strength with considering diverse factors, such as temperature, pressure, and oxidant amount indicated that mussel-inspired mucoadhesive polymer could be a promising candidate for an adhesive in various biomedical applications.

• Journal of the Korean Magnetics Society
• /
• v.14 no.6
• /
• pp.207-212
• /
• 2004

Eddy current (EC) testing methods are widely used in a variety of applications including the inspection of steam generator tubes in nuclear power plants, aircraft parts and airframes. A key factor that affects the EC signal is lift-off which means the physical distance between a sensor and a specimen in the testing. In practice, it is difficult to keep track of the actual value of the lift -off during a specific experiment, simulation or testing in the field, which is essential for accurate interpretation of the signal to be used in the following steps. Hence it is necessary to have a scheme to render the EC signal invariant to the effects of lift-off in spite of the changes in the real world. This paper describes a new method for compensating EC signals for variations in lift-off by acquiring an invariance feature using a homomorphic operator and neural network techniques. The signals from various lift-offs are transformed to obtain a zero lift-off equivalent signal that can be subsequently used for defect characterization in the next step.

• Journal of KIISE:Software and Applications
• /
• v.27 no.2
• /
• pp.120-133
• /
• 2000

Major obstruction of using formal methods for hybrid real-time systems in industry is the difficulty that engineers have in understanding and applying the quantitative methods in an abstract requirements phase. While formal methods technology in safety-critical systems can help increase confidence of software, difficulty and complexity in using them can cause another hazard. In order to overcome this obstruction, we propose a framework for qualitative requirements engineering of the hybrid real-time systems. It consists of a qualitative method for requirements specification, called QFM (Qualitative Formal Method), and a safety analysis method for the requirements based on a causality information, called CRSA (Causal Requirements Safety Analysis). QFM emphasizes the idea of a causal and qualitative reasoning in formal methods to reduce the cognitive burden of designers when specifying and validating the software requirements of hybrid safety systems. CRSA can evaluate the logical contribution of the software elements to the physical hazard of systems by utilizing the causality information that is kept during specification by QFM. Using the Shutdown System 2 of Wolsong nuclear power plants as a realistic example, we demonstrate the effectiveness of our approach.

• Tunnel and Underground Space
• /
• v.30 no.2
• /
• pp.136-148
• /
• 2020

Nuclear power plants have been operated in Korea since 1978, thus the high-level radioactive waste (HLW) produced from the plants has been accumulated accordingly. Hence, it is urgent to secure a final repository for HLW disposal, however, siting process should be preceded, which usually takes long time, as it requires broad and precise investigation. The investigation is generally carried out in stages, which consists of multidisciplinary approaches. In this study, the case studies mainly pertaining to rock mechanics were conducted. Rock mechanical aspects required in each stage and their applications were investigated and corresponding R&D researches were presented as well. At the same time, current research status in Korea was presented, followed by a brief future research plan with regard to the site investigation. The future research aims to produce fundamental information for siting process, and the compiled cases in this study will be utilized as references in the research.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.33 no.2
• /
• pp.116-122
• /
• 2019

The aim of this study is to evaluate the anti-inflammatory effect of Hataedock treatment using Coptidis Rhizome and Glycyrrhiza Uralensis (CG) mixed extract in allergic rhinitis induced NC/Nga mice. We divided NC/Nga mice into 3 groups as follows; allergic rhinitis-induced group after CG Hataedock treatment (CGT, n=10), no treatment group (Ctrl), allergic rhinitis elicited group (ARE). To induce allergic rhinitis, NC/Nga mice of 3 weeks age were sensitized on 7, 8 and 9week by Ovalbumin (OVA) antigen in intranasal space. Hataedock using CG extract was administered on week 3 in allergic rhinitis-induced group (CGT) after Hataedock treatment. To identify distribution of Interlukin (IL)-4, Cluster of differentiation 40 (CD40), high-affinity IgE receptor ($Fc{\varepsilon}RI$), substance P, Matrix metallopeptidase 9 (MMP-9), Nuclear $factor-{\kappa}B$ ($NF-{\kappa}B$) p65, Inducible nitric oxide synthase (iNOS) and Cycloxygenase-2 (COX-2), we used histological examination. CGT significantly inhibited IL-4 and CD40 response compared with ARE. The reduction of Th2 cytokine expression decreased inflammatory mediators such as $Fc{\varepsilon}RI$, substance P, MMP-9, $NF-{\kappa}B$ p65, iNOS and COX-2. Such immunological improvement induced reduction of respiratory epithelial damage and mucin secretion in goblet cell. These results indicate that Hataedock treatment suppresses allergic rhinitis through modulating of Th2 responses and diminishing various inflammatory mediators in nasal mucosal tissue. It might have potential applications for prevention and treatment of allergic rhinitis.