• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.135-140
• /
• 2021

In this paper is a study on system design to prevent accidents using accelerometers. A switching power FET was configured at the power supply stage, and DC-DC converter, a regulator, and an LDO were designed for the power supply. In order to solve the power problem at once, it was divided into two parts, and a 3-axis accelerometer was designed to extract motion information to safely prevent accidents. Microprocessor enables communication through I2C and UART communication ports, and enables debugging through J-LINK. As a result of measuring the acceleration sensor data, it was confirmed that the power is normally cut off to prevent accidents when motion at an angle of 30° or more is detected.

• Electronics and Telecommunications Trends
• /
• v.33 no.6
• /
• pp.12-23
• /
• 2018

In this paper, we review the technical trends of diamond and gallium oxide ($Ga_2O_3$) semiconductor technologies among ultra-wide bandgap semiconductor technologies for harsh environments. Diamond exhibits some of the most extreme physical properties such as a wide bandgap, high breakdown field, high electron mobility, and high thermal conductivity, yet its practical use in harsh environments has been limited owing to its scarcity, expense, and small-sized substrate. In addition, the difficulty of n-type doping through ion implantation into diamond is an obstacle to the normally-off operation of transistors. $Ga_2O_3$ also has material properties such as a wide bandgap, high breakdown field, and high working temperature superior to that of silicon, gallium arsenide, gallium nitride, silicon carbide, and so on. In addition, $Ga_2O_3$ bulk crystal growth has developed dramatically. Although the bulk growth is still relatively immature, a 2-inch substrate can already be purchased, whereas 4- and 6-inch substrates are currently under development. Owing to the rapid development of $Ga_2O_3$ bulk and epitaxy growth, device results have quickly followed. We look briefly into diamond and $Ga_2O_3$ semiconductor devices and epitaxy results that can be applied to harsh environments.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.223-224
• /
• 2023

Optimal fleet management in the planning stage is one of the most critical activities that guarantee successful construction projects. In South Korea, the construction standard production rate database (CSPRD) is normally employed. However, when it comes to a trade-off problem that involves decision-making on optimal sets of equipment to perform a certain task, the method will require the planners' in-depth knowledge and experience regarding the target process and a time consuming estimation of the performance of every possible scenario must be conducted for the deduction of the optimal fleet management. On this account, this research paper proposes a lightweight method of using mixed integer nonlinear programming (MINLP) in multi-objective problems based on CSPRD-based mathematical equations to assist planners in the preplanning stage of choosing the optimal sets of types and size machinery to efficiently arrange the construction scheduling and budgeting.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.2
• /
• pp.159-169
• /
• 2004

Sedimentation and depositional pattern of the fine-grained sediments in the southeastern inner shelf of Korea were studied using a very high-resolution seismic profiles and sediment data. The recent mud deposits up to 45 m thick are distributed in the inner shelf forming a nearshore belt from the eastern part of Geoje Island to off the Pohang along the coast. The sediment in this area consists of homogeneous mud with mean grain size between $8.6\;to\;5.3\phi$ and does not show any distinct variability It gradually becomes finer and well sorted northeastward along the coast. Sediments normally appear as structureless massive mud but X-radiographs show that some bioturbation and faint lamination are present. The sediments accumulate at a rate of 0.18-0.44 cm/yr and the rate coincides well with the long-term (a 1000-year scale) accumulation based on very high-resolution seismic data. Distribution of wet bulk density and velocity shows a gradual increase from the southeastern part of Ulsan to off Pohang, whereas porosity shows a reverse pattern. Correlations between velocity and porosity/mean grain size are different from other regions compared, due to the difference of sediment texture and sedimentary environment. The recent shelf deposits are seismically characterized by three distinct facies: 1) well-stratified (near the river mouth), 2) semi-transparent (eastern part of Geoje Island), and 3) transparent (off Ulsan). The results suggest that fine-grained sediment derived from rivers, forming a nearshore mud belt, have been transported northeastward by the northeastward-flowing coastal current.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.942-947
• /
• 2010

In the present study, pollen tube growth and fruit set in Asian pear ($Pyrus$ $pyrifolia$) were examined upon the mechanical damage on the stigma and style following the artificial pollination. When the upper middle part of style was cut off at 48 h after the artificial pollination, pollen tube grew to the middle of the style and the subsequent pollen tube elongation and fruit set normally occurred. When the style was cut off before the pollen tube reached the middle of the style, however, no pollen tube elongation and fruit set occurred. With the pollen tube elongation through the style, callose plugs at the basal part of the pollen tube were formed to the direction of the elongation at regular intervals. When the upper part of pollen tube attached pollen grain was cut off, however, callose plugs were formed defectively in the pollen tube, and the pollen tube opened and lost their turgor pressure. These facts might be the reason for the ceased or delayed pollen tube elongation and ultimately the failure of the fertilization.

• 한국균학회소식:학술대회논문집
• /
• 2009.10a
• /
• pp.3-13
• /
• 2009

90 wild Agaricus strains from China, including 44 Agaricus bisporus strains identified preliminarily by isozyme electrophoresis, were studied by the techniques of SRAP and ISSR. 18 special SRAP bands and 12 special ISSR bands were analyzed, the strains were clustered and a demdrogram was obtained. The results showed that the strains were divided into 2 groups, wild A. bisporus group and the other Agaricus group. It is similar to the result of isozyme electrophoresis. 41 wild A. bisporus strains from Sichuan and Tibet were divided into 4 groups based on their growing places, suggesting the regionally difference of the strains to be quite obvious. Some white wild A. bisporus strains from Xinjiang and Tibet had special patterns, resulting in lower coefficient values with other wild A. bisporus strains. The biological characteristics of three wild A. bisporus strains were analyzed, and the results showed: 1. The wild strains grew slowly on PDA medium with weak appressed mycelia, and grew normally in kernel or fermented cottonseed shell substrate. 2. They grew faster than control strain As2796 under lower temperature of $16^{\circ}C$, and higher temperature of $32^{\circ}C$, with optimum growing temperature of $20-24^{\circ}C$, which was $4^{\circ}C$ lower than that of control strain. 3. In the cultivation with manure compost via twice fermentation, the mycelia grew normally in compost and quite slowly in casing soil, and the fruitbodies occurred less and late with easily opening and low production. 4. The fruitbody was off-white with flat and scaled cap, long stipe and dark gill. The bisporus basidia occupied 70-80% and trisporus basidia 20-30% of the total basidia. 5. Heterokaryotic monospore isolates could fruit in cultivation, and the homokaryotic isolates could cross with those derived from overseas wild A.bisporus strains. 6. The electrophoresis phenotype of isozymes such as esterase etc. belonged to high production type (H type). 7. The RAPD patterns made much difference from those of high production, good quality or hybrid strains, which indicated that the wild strains produce a new kind of RAPD type.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.11
• /
• pp.1654-1659
• /
• 2010

In order to utilize squid liver by-products, which is normally discarded as industrial waste in the process of squid manufacturing, salt-fermented squid liver sauce was prepared experimentally and also tested for inhibitory activity against angiotensin converting enzyme (ACE). ACE inhibitory activity of squid liver sauce was increased with the elapse of fermentation days until 12 months, followed by a constant level of inhibitory activity thereafter. 15-month-old sauce ($IC_{50}=29.66\;{\mu}g$) was filtered through PM-10 membrane (M.W. cut-off 10,000 Da) to obtain the peptides fractions with ACE inhibition activity. Filtered fractions were applied to a Bio-gel P-2 column and three active fractions (A, B and C) were collected. Among them, fraction B applied to a SuperQ-Toyopearl 650S column chromatography lead to the isolation of active B-1 fraction. It has the ACE inhibitory activity ($IC_{50}=5.46\;{\mu}g$). The main composition of its amino acids is lysine, glycine and proline, which cover about 85% of the total amino acids.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.3
• /
• pp.213-224
• /
• 2010

An optically controlled silicon MESFET (OPFET) was fabricated by diffusion process to enhance the quantum efficiency, which is the most important optoelectronic device performance usually affected by ion implantation process due to large number of process induced defects. The desired impurity distribution profile and the junction depth were obtained solely with diffusion, and etching processes monitored by atomic force microscope, spreading resistance profiling and C-V measurements. With this approach fabrication induced defects are reduced, leading to significantly improved performance. The fabricated OPFET devices showed proper I-V characteristics with desired pinch-off voltage and threshold voltage for normally-on devices. The peak photoresponsivity was obtained at 620 nm wavelength and the extracted external quantum efficiency from the photoresponse plot was found to be approximately 87.9%. This result is evidence of enhancement of device quantum efficiency fabricated by the diffusion process. It also supports the fact that the diffusion process is an extremely suitable process for fabrication of high performance optoelectronic devices. The maximum gain of OPFET at optical modulated signal was obtained at the frequency of 1 MHz with rise time and fall time approximately of 480 nS. The extracted transconductance shows the possible potential of device speed performance improvements for shorter gate length. The results support the use of a diffusion process for fabrication of high performance optoelectronic devices.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.929-937
• /
• 2008

A GPS receiver system utilized on satellite launch vehicles should operate normally under harsh environments as well as high-dynamic conditions. The GPS receiver system to use for range safety of KSLV(Korea Space Launch Vehicle)-I that is the first satellite launch vehicle developed by KARI(Korea Aerospace Research Institute) has been confirmed to survive under the environment of the launcher through extensive terrestrial tests including humidity, high and low temperatures, vacuum, sinusoidal and random vibrations, shocks, acceleration, EMI/EMC(Electromagnetic Interference/ Electromagnetic Compatibility), etc. Several performance tests have been also carried out in order to evaluate tracking capability and accuracy of the GPS receiver under high-dynamic conditions using a GPS signal simulator. Some lessons-learned during development of the GPS receiver system and its special characteristics compared with COTS(Commercial-Off-The-Shelf) GPS receiver systems are described in this paper.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.364-371
• /
• 2012

Currently, CMMB(China Mobile Multimedia Broadcasting) and the conventional analog TV broadcasting have transmitted by using UHF(Ultra High Frequency : 474MHz~754MHz) band. Normally, the transmission power of the digital TV broadcasting is lower than the conventional analog TV broadcasting to protect the reception quality of the conventional analog TV broadcasting. The reception sensitivity of CMMB receiver has severely deteriorated due to adjacent the conventional analog TV broadcasting signals which called ACI (Adjacent Channel Interference). To improve the reception sensitivity of a CMMB receiver on ACI environment, this paper proposed a simple method which is tuning a cut off frequency of LPF (Low Pass Filter). From the experiment, the reception sensitivity of CMMB receiver was improved as 11.3dB.